Energy & Power Generation Water Treatment

Staal Instruments B.V. specializes in wireless radar level measurement and remote tank monitoring solutions. Their innovative sensors provide accurate, battery-powered monitoring for tanks and sewers, integrating seamlessly with cloud platforms for real-time data and alerts, serving diverse industries across Europe.

Dosatron International S.A. is a leading manufacturer of water-powered dosing pumps, offering innovative solutions for precise chemical dosing in water treatment. With a global presence, Dosatron serves diverse industries, ensuring efficient water management and treatment across various regions.

Tidal Vision specializes in advanced chitosan solutions, offering powerful and sustainable chemistry for water treatment and pollution challenges. Their innovative biomolecular technologies provide superior performance and economic benefits for critical industries.

If you knew there was a material out there with a proven track record worldwide for outperforming others, would you want to know more about it? Using cutting edge technology to meet the toughest challenges, Amiblu manufactures GRP pipelines and storage systems that last for generations and do not corrode. GRP is a resilient, composite material utilised in many aspects of construction and civil engineering to deliver long lasting infrastructure. The history of Amiblu’s GRP systems starts with the first production of centrifugal cast (CC) pipes in Basel in 1957 and continuous filament wound (FW) pipes in 1969 in Norway using top quality raw materials combined with glass fibres to create robust pipes and storage solutions. Over the past 60+ years, research and development, growth and investment now puts Amiblu at the forefront of GRP pipe production, with seven state of the art manufacturing facilities and a global network of licensed partners producing the two market leading names in GRP pipes – Flowtite (FW) and Hobas (CC). Amiblu takes environmental responsibility very seriously by developing systems that offer a number of benefits to asset owners who are faced with aging networks, growing cities, climate change and increases in demand. Challenging traditional materials, our products are corrosion and abrasion resistant, with excellent hydraulics, can be bespoke made to meet project requirements, are low-maintenance and engineered for 150 years’ service life. Products are manufactured for: Sewage & stormwater Hydropower Circular & non-circular pipeline rehabilitation Potable & raw water delivery Industrial processes Micro-tunnelling applications. The greenest product is the one you don’t have to replace.

Established in 1995, Circle Control part of the Empower Group, is a trusted electrical contracting company based in Snaith, near Selby. For over 30 years, we’ve been delivering LV electrical installation solutions across the utility and renewable energy sectors, combining technical expertise with an unwavering commitment to safety, quality, and environmental responsibility. Originally focused on the Water Industry, we’ve since expanded into Renewable Energy, supporting clients on the UK’s journey towards a more sustainable and resilient future. Our approach is straightforward, cost-effective, compliant, and built on decades of engineering know how. We are NICEIC approved, ISO 9001 accredited with Citation, and proud members of the Achilles Utilities Vendor Database (UVDB) and Constructionline. Our skilled team holds a wide range of industry certifications, including CSCS/ECS, EUSR, Confined Space, Compex, Asbestos Awareness, First Aid, PASMA, and IPAF, ensuring safe, compliant delivery across every project. As part of the Empower Group, we’re proud to combine long standing technical excellence with a forward-looking focus on innovation and sustainability, helping clients reduce environmental impact, improve operational efficiency, and future-proof their infrastructure.

Cotswold Valves forms part of the Flow Control Group. Covering a wide range of sectors including oil, gas, industrial, water, wastewater, sewage, chemical and power generation, the business provides consultancy services including product design, specification, selection, valve sizing, actuation, flow and pressure management, installation and the supply and retrofit of a full range of spares and replacement products. The Group’s Site Services division specialises in “On-Site” product support. We can undertake both new installations and carry out retrofit of valves and actuators to existing works. Where necessary we can act in a support capacity on client led installations The Flow Control Group incorporates fabrication and machining capabilities and can, in addition to the production of valves and penstocks, design and manufacture mounting kits, pedestals, drive bushes, spindles and other ancillary equipment. Our manufacturing facilities supply bespoke products in accordance with ISO 9001:2015 quality management systems. The business also operates to ISO 14001:2015 and ISO 45000:2018 standards operating to the highest Health & Safety and Environmental standards. Utilising our in-house actuation facility, we can assist with actuator selection, and can fit, set and test actuators prior to delivery. We can also fit actuators on site where necessary.

Enisca is a multi-disciplinary design, engineering and construction business operating in the power and environmental sectors delivering innovative, sustainable and quality solutions for public and private sector clients in these markets. Enisca has developed and maintained strong partnerships and collaborative relationships in our industry. Our focus on safety, our customers’ needs, programme, cost and the efficiency of project delivery support our key objective of ensuring high levels of customer satisfaction. Design and construct Our experienced and skilled engineering teams work in partnership with our clients and related stakeholders from an optioneering stage through the cycle of design, construction, commissioning, training and handover to the aftercare of asset operation and maintenance. Process & MEICA design services. Feasibility ctudies and cite surveys. Carbon/energy and whole life cost assessment. Water treatment and pumping. Wastewater treatment and pumping. Industrial effluent treatment. Process plant and controls. Turnkey mechanical and electrical installation. Commissioning and training Our experienced skilled commissioning engineers (process, mechanical and electrical/control systems) endeavour to provide clients with a seamless, trouble free handover of completed projects from pre-commissioning through to process proving and training of operators. Power, control and automation Enisca Automation is the motor control centre and control systems integration division of Enisca. Enisca Automation provides a range of power distribution, control and automation solutions to a range of public, commercial and industrial clients. The Automation Division is TickIT accredited and our engineers work in partnership with our clients through the cycle of design, manufacture, commissioning, training and handover. Enisca Automation aftercare provision includes planned maintenance and service with emergency callout. MCC manufactured solutions to Form 2 and Form 4. ICA, SCADA, HMI and systems integration. G5/4 harmonic studies and reports. Power factor correction and surge protection. Thermographic surveys. Certified Profibus design and installation. Enisca Automation customers include a range of engineering & building services contractors, commercial and industrial business clients. Utilizing fully automated design, materials management, assembly and testing processes Enisca can supply product in compliance with the rigorous standards set out in BS EN 60439-1:1999 for low voltage switchgear and control gear assemblies, all products are fully CE certified. Process plant The in-house capabilities of our business set us apart. With the process, civil, mechanical, electrical and chemical engineering skills of our people we design and construct turnkey water and wastewater treatment and pumping solutions. In-house we design and manufacture water and wastewater process plant that can be incorporated into overall solutions. Our Power, Control and Automation Division designs, builds and commissions the motor control centres, automation software and SCADA systems that control our plants. Package treatment plants – Wastewater treatment for municipal and industrial applications. Package treatment plants – Potable water applications. Process plant manufacture. Screens. Scraper bridges. Picket fence thickeners. Package DAF plants. Package pumping stations and booster sets. Chemical dosing plants. Stormwater attenuation and pumping. Sampling and recording. Operation and maintenance Our operations and service engineers provide operation, maintenance, service and callout support. We have a strong, resourceful team to manage utility and industrial process plant installations. The Enisca Automation aftercare provision, includes planned maintenance and service with emergency callout.

Elmo Rietschle, part of the Gardner Denver Group is a major manufacturer and supplier of compressed air and gas, vacuum pump, blower and fluid transfer technologies to the water and wastewater industries. Its experienced engineers can assist on the concept design of pumps for the OEM market, right through to system design for end users and custom built packages for central air or vacuum supply. Additionally, a comprehensive network of workshop and service engineers operates from five key geographical locations, offering 24-hour support and service. The company has recently added the GBH-8 to its range of side channel blowers designed for use in wastewater purification applications and in the oxygenation of activated sludge tanks. Compared to a standard blower of similar output, the new GBH-8 is 65% lighter, has a 40% smaller footprint, and offers twice the power. Using techniques such as CFD (computational fluid dynamics), the GBH-8 also offers high performance, with a continuous build-up of pressure. The unit features rotational speed control for easy setting of the optimal operating point, with pulsation free air supply and low noise levels. In addition, bearing lifetime in the GBH-8 is 20,000 hours, meaning downtime for maintenance, and the associated costs, are kept to a minimum.

In a competitive and evolving global market, our long history of supplying aeration equipment in wastewater treatment plants that best meets customer specific requirements, makes Robuschi a trusted and reliable partner for the environmental industry. Cost-effective solutions for new plants or refurbishments of existing installations are a major focus of our product excellence and application expertise. Therefore, as a global supplier of environmental solutions, we lead the market in developing innovative technologies that support our customers in reducing life cycle costs, increasing efficiency, meeting legal requirements and, finally, improving the quality of product or services they want to provide to their own customers. In wastewater treatment plants, power consumption mainly comes from aeration machines. Robuschi supplies PD blowers and screw blowers, able to provide significant energy saving, depending on plant configuration. Additionally the Robox Energy combines the technological advantages of Robuschi screw compressor and permanent magnet motor with Smart Process Control tool to halve wastewater treatment plant running costs. Ecological sustainability is part of the Robuschi strategy, focusing on promoting environmentally friendly promoting, enhancing energy saving and protecting natural resources.

Glanua is an industry leader in providing innovative and sustainable engineering solutions to design, build and operate critical water and wastewater infrastructure across Ireland and the UK. Glanua is passionate about solving today’s environmental challenges and delivering a decarbonised and sustainable world. At Glanua, we design, build, operate, and maintain innovative water and wastewater solutions that protect the environment and support the people who depend on them. Sustainability is at our core — it’s why we innovate, how we work and the future we’re building. We’re reimagining how the world treats water, using cutting-edge technology, smart design and fresh thinking to deliver cleaner, greener results for both industry and the public sector. With global ambitions and a track record of turning ideas into reality, we’re on an exciting journey of growth and impact. Glanua are a partner to major water utilities in Ireland and the UK, including Uisce Éireann (formally Irish Water), Thames Water, Yorkshire Water, Affinity Water and Northern Ireland Water. In the industrial sector, their clients include prominent names such as ABP, Glanbia, Kerry Group, and other key players in the food and beverage, pharmaceutical, and distillery industries. Core Values Glanua lives by our core values, including Safety and Well-being, Innovation, Integrity, Collaboration, Courage, Agility, Accountability, Diversity, and Inclusion. These values guide our actions and decisions, ensuring that we uphold the highest standards in everything we do. Our talented team comprises over 500 professionals across Ireland and the UK. Our UK office is headquartered in Hertfordshire and we also have offices in Reading, Sheffield, Northern Ireland, Galway and a manufacturing facility in Navan, Co Meath. Sustainability At Glanua, we understand the vital role we play in ensuring the delivery of safe and high-quality drinking water, as well as the proper treatment of wastewater before it is discharged into the environment. Committed to building today without compromising the environment for future generations, sustainability lies at the core of what we do. To strengthen our commitment, we have partnered with Earthshine, a leading sustainability consultant to develop our sustainability strategy that aligns with our values and ensures that every engineering solution we deliver contributes to a greener and more sustainable world. Future growth Glanua is on a growth trajectory, with ambitious plans to reach €400 million in the next five years. As we continue to expand our capabilities and service offerings, we remain committed to being at the forefront of sustainable engineering solutions, driving positive change in the water and wastewater infrastructure landscape in Ireland, UK, and internationally. Our growth is evident in the recent expansion of our team by over 150 people in 2023, bringing our total workforce to over 500 people. In 2024, we acquired O&M specialist company, Aqua Operations and in 2025, we acquired Anaerobic Digestion specialist company, Marches Biogas building a complete solutions provider in Water, Wastewater and Bioresources.

Grant Plant Hire Ltd (GPHL) is based near Penrith in the north of England close to the M6 and A66. GPHL has the highest of standards when it comes to the delivery of construction projects throughout Scotland and Northern England. The time-served expertise within our team gives us the ability to not only focus on the critical path but all the ancillary aspects of the job. We take pride in offering a partnered approach with our clients in order to achieve the best outcome with the minimum of delay. As well as traditional civil engineering works, GPHL specialisms include: Steel piled cofferdams In-river working Pipeline/trunk main installation Deep drainage Hydro electric schemes Tidal works Our latest projects Water mains: Currently we are engaged on Northumbrian Water’s County Durham and Tees Valley Pipeline, it is designed to improve water quality and increase resilience and operability within the Tees Network. The pipeline will replace existing portable water mains across the North East of England. GPHL are installing over 11 km of new steel welded main, completing works at the Whorley Strategic Connection including three number cast in situ underground tanks and tying in both the new inlet and twin outlet pipework to the existing reservoir. Hydro electric: GPHL have recently completed all the civil engineering works on a pioneering new type of hydro energy generation scheme at Whiteadder Reservoir, East Lothian for Scottish Water as part of its work to reduce carbon emissions. The hydro energy generation scheme is fed by a siphon and is believed to be the first of its type in Europe.  The scheme will enable Scottish Water to generate green energy while accurately controlling the level of the reservoir during seasonal fluctuations in weather. The siphon technology in the project allows Scottish Water to draw water up through the intake and over the top of the dam which then runs down through the siphon, through the hydro turbine, and back to the natural environment. Flood alleviation: GPHL are also currently subcontracted to Volker Stevin on the Flood Risk management Scheme in Appleby, for the Environment Agency. The project involves the installation of a new flood relief pumping station and installation of a new stretch of culvert diverting an existing culvert to the pumping station. A new rising main will outfall into the River Eden. The scheme is known as Appleby Town Centre Flood Risk Management Scheme (FRMS) and aims to reduce flooding caused by surcharging of the Doomgate Culvert which is designated as a main river and is a tributary of the River Eden.

Gurney Environmental is a well established provider of systems and technologies used in the treatment of water and wastewater. From water supply to water re-use, we have designed and developed innovative, low cost and sustainable systems for the water and wastewater industries. Low CAPEX plus low OPEX equals low TOTEX. True sustainability is the benchmark for success with Gurney. We offer unique water and wastewater treatment systems, equipment and design including zero-to-low energy www and reservoir destratification systems. Our experience and knowledge of the water and wastewater treatment industries has successfully helped a wide variety of clients including major landowners (such as the Crown Estate) and many of the UK’s water utility companies. Our systems are today recognised internationally with a growing number of foreign municipals. Gurney has a total commitment to quality. Our systems and solutions represent the finest in long-term value, which is why we place such a strong emphasis on equipment with sturdy construction and fewer moving parts. Our commitment to a low total life cost is a key part of a commitment to quality.

With over 30 years of experience delivering expertise in the industry, JK Fabrications Ltd has become one of the front runners and will keep challenging ourselves and others to improve our Environment as we believe that; Our Environment, is our Future. At JK Fabrications, we are an engineering company that takes pride in our family roots, with an aim to continue to successfully grow our business. Our company values are incorporated into everything we carry out and we seek to work with like-minded companies. Established in 1998, JK Fabrications specialises in efficent, effective, and environmentally sensitive solutions to the Water Treatment, Waste Water, Waste to Energy, and Pharmaceuticals Industry. With over 30 years of experience delivering expertise in the industry, JK Fabrications has become one of the front runners and will keep challenging ourselves and others to improve our Environment as we believe that ‘Our Environment, is our Future’. With the ease of access to Northern Ireland’s principal motorway network and equal distance between both Belfast Airports and Dublin Airport, JK Fabrications’ 50,000 Sq/ft premises in Newry are the perfect location to produce and deliver your project. Design We have a fully equipped in-house design team with over 65 years of combined technical, manufacturing, and sector-specific experience, that are highly skilled and trained using the very latest design software. Manufacture We have built our reputation by producing specialised products for the waste-to-energy, wastewater, water treatment, and pharmaceutical industries. Our experienced welders and fabricators along with our state-of-the-art machinery make sure that each project is carried out to a high standard. Install We have an experienced installation team with a dedicated core team of engineers, mechanical fitters, and coded welders who have over 30 years of experience in the supply and installation of our fabricated products for a wide range of projects throughout the UK and Ireland. Commission Our experienced commissioning engineers will attend the site to oversee the installation of systems, plants, and equipment. They will commission, test, and optimise the equipment as well as provide the operators with operation and maintenance manuals. Products include: Stainless Steel Pipework | Stainless Steel Vessels (inc Pressure Vessels) | Mild Steel Pipework | Lamellas | Picket Fence Thickeners | Rectangular Bridge Scrapers | Half Bridge Scrapers | Conical Settlement Tanks

Morgan Sindall is a UK construction, infrastructure and design business with a network of local offices. The company works for private and public sector customers on projects from £50,000 to over £500 million. Activities range from small works and repair and maintenance, to the design and delivery of complex construction and engineering projects where it is able to provide specialist design, tunnelling, utilities, building, civil engineering and mechanical and electrical services. The company operates across the commercial, defence, education, energy, healthcare, industrial, leisure, retail, transport, waste and water sectors. The company is a leading UK construction and regeneration group with revenue of over £2 billion and which operates through five divisions of construction and infrastructure, affordable housing, fit out, urban regeneration and investments.

Nereda® technology from Royal HaskoningDHV offers sustainable wastewater treatment solutions for municipal and industrial water. The natural sewage treatment process purifies water with minimal or no chemical usage by using the patented aerobic granular sludge technology. Compared to activated sludge technologies, the biological treatment power of the technology is much larger, while saving up to 50% on energy costs, delivering high quality effluent for low costs and requiring only a quarter of the area of conventional activated sludge installations. Biomass in the process develops as fast settling aerobic granular sludge. These granules have excellent settling properties, so the process does not require a separate time-consuming decant phase like conventional SBR’s. All the biological treatment processes take place simultaneously in the granules, requiring only one tank. The technology is very versatile; it can be developed as a new build or used to retrofit existing conventional CAS or SBR plants. The benefits of the technology include: Excellent treatment results and settling properties: Compared to activated sludge technologies, the biological treatment power of the technology is much larger as a considerably higher concentration of biological active mass is applied that in addition has a much higher content of microorganism that are crucial for biological nitrogen and phosphate removal. Sustainable: Compared to conventional wastewater treatment processes, the technology not only has significantly lower energy consumption and associated greenhouse gas emission, but also produces, commonly without the use of waste generating chemicals, a remarkably high effluent quality. Cost effective: The technology results in construction costs that are lower than for conventional technology as for example, tank volumes are up to four times smaller and less equipment is required. Small physical footprint: Its footprint at sewage treatment plants is reduced due to the full nutrient removal process taking place in one single reactor. Easy to operate: It has proved in operation to satisfy the most stringent purification requirements. Thanks to the nature of the technology, plant operation is easy and process performance robust. The technology is proven and applicable for even the largest applications. Currently, there are over 70 wastewater treatment plants in operation or under construction all over the world

Pipelife is an established and well respected supplier of polyethylene pipes and recognised as a global leader in the supply of long length extruded solid wall PE pipes. Our long length extruded pipes are produced by Pipelife Norge in Norway. The large, high-quality pipes are extruded at our Stathelle plant using premium PE100 resins and strict factory quality controls. Each pipe is made to order through a seamless, continuous extrusion process that eliminates welds and extends directly from the factory into the fjord. From there, the pipes are transported by tugboat straight to their destination, removing the need for land storage or extensive working areas. This efficient production and delivery method not only ensures exceptional durability and precision but also reduces handling and lowers the overall carbon footprint, making Pipelife a reliable partner for major infrastructure projects worldwide. Located on the shore of a sheltered fjord, Pipelife’s Stathelle plant offers the ideal setting for producing long-length pipes. Its coastal position allows continuous production in a clean, controlled environment with direct access to the sea, meaning pipe lengths are limited only by the fjord’s size and the pipe’s diameter. The facility is equipped with extensive storage areas on both land and water, along with a dedicated wharf for easy loading by ocean-going tugs. Supported by Norway’s reliable infrastructure, the plant benefits from a stable energy supply and consistent access to essential raw materials. Inside, a state-of-the-art production line, enhanced with specialized modifications, ensures the highest manufacturing standards and delivers unique advantages in product quality and performance. Pipelife’s long-length, large-diameter pipes are designed for a wide range of demanding applications, including: Wastewater sea outfalls and diffusers Desalination and power plant intakes and outfalls Cable landfalls Cable protection systems Horizontal directional drilling (HDD) liner ducts Fish return lines

For more than 140 years SPP Pumps has been a leading designer and manufacturer of centrifugal pumps and associated systems, a global principal in design, supply and servicing of pumps, pump packages and equipment for a wide range of applications and industry sectors. This includes water and wastewater treatment, oil and gas production, airports, hotels, construction, mining and for large industrial plants. Low life cost and environmental considerations are fundamental design priorities. With its exceptional expertise and experience, the company’s robust, trusted engineering has provided critical performance across the water industry. As a UK manufacturer, SPP are a leading supplier of clean and wastewater pumps to the Water Industry and has long established Framework agreements with many of the major Utilities throughout the UK and Northern Ireland. SPP Pumps has extensive experience of designing and delivering highly efficient ‘Pump as Turbine’ (PaT) solutions capable of rapid return on investment. Small hydro-electric power production provides a convenient, cost-effective source of renewable energy.

Te-Tech Process Solutions is a provider of traditional products and advanced process technologies for water and wastewater treatment. Our products cater for a range of client needs from standardised products to bespoke applications designed to meet the exacting needs of the client’s process. Our in-house capability includes process, mechanical and electrical design, off-site manufacture and assembly, MCC and Control Panel Manufacture and System Integration. Our extended services include digital engineering, service and maintenance, operational support and real time control. Advanced technology and innovation are at the core of our business enabling us to provide high quality, efficient solutions to our clients. Our business is founded upon 4 key areas of expertise: WATER & WASTEWATER TREATMENT Te-Tech deliver established water and wastewater products and processes, including: te-cyc TM: Cyclic activated sludge ‘Macrofloc’ biological wastewater treatment te-saf TM: Packaged submerged aerated filters te-ion TM: Advanced oxidation technology for water and wastewater treatment te-mem TM: Advanced membrane filtration te-mbr TM: Package advanced membrane filtration te-sewpas TM: Airlift sludge removal plant te-uv TM: UV disinfection AUTOMATION CONTROL & TECHNOLOGY Our MCC and control panels are provided into multiple sectors including process and water, marine, oil & gas, energy, nuclear, defence and building services. Our capabilities include: MCCs LV Switchboards Local Control Panels Software System Integration DIGITAL ENGINEERING Te-Tech utilise cutting edge digital technologies to provide innovative solutions to our client’s problems. Our digital engineering services support the whole life cycle of our clients’ assets from conceptual design, through design for manufacture and assembly (DfMA), installation on site, final commissioning, operation and maintenance and decommissioning at the end of the asset’s life. Our in-house software capability provides clients with the visualisation tools to precisely view and interrogate designs in a virtual world to minimise clashes, delays or abortive activities and to ensure that the delivered assets are acceptable to operators in the real world. Our BIM capability ensures our products and technologies create assets that are fit for the future and our virtual reality technology allows our teams and clients to fully immerse themselves in the design, optimisation and operation of our solution prior to manufacturing. Our asset optimisation capability helps clients get the best performance out of their assets, by integrating real time control and using data driven insight we can ensure the sustainability and efficiency of asset performance across its lifecycle. Our virtual environment shows the equipment in operation, with liquids moving and plant turning on/off according to the actual system control philosophy. This is an invaluable tool for HAZOPS, ALM and remote training of operators before the plant is constructed – reducing risk and time on site OFF-SITE MANUFACTURING & ASSEMBLY Te-Tech’s off-site manufacture and assembly capability provides standard products and engineered solutions to the water and wastewater sector, oil and gas and energy industries. Its primary focus is on solutions which are designed for manufacture and assembly DfMA; reducing on site construction time, reducing carbon footprint and minimising risk. At our Southampton based headquarters we have over 1000 sq. metres of internal manufacturing space as well as external areas for assembly and storage of larger materials and manufactured components. We design, manufacture and assemble to a range of different standards including CE/CA marking, EXC2 Structural Steel, BS and ASME welding procedures. Our strength within Te-Tech culminates in our integrated service, offering the complete process solution package, from digital design, automation and control through to off-site manufacture and on site assembly.

STORTEC Engineering Limited operates within the UK and worldwide water, wastewater, industrial waste and renewable energy industries.