Aguato

    Nitrogen and phosphorus removal for reuse by an anaerobic tank and an oxidation ditch

    A municipal plant in Castle Rock, Colorado, treats domestic sewage in an oxidation ditch run as extended activated sludge for biological nutrient removal, with an anaerobic tank in front. It was designed for about 15,200 m³/day and the temperature averages around 16 °C. Water is short in the region, so nitrogen and phosphorus must be brought very low for the effluent to be reused downstream.

    Treatment line

    1. 01Anaerobic tankPlaced ahead of the ditch with a 1 to 2 h retention time, for biological phosphorus removal.
    2. 02Oxidation ditchAnoxic zone with a 5.7 h retention time and aerobic zone with a 19 h retention time, with an online oxygen controller and sensors for redox, ammonium, nitrate and acidity.

    What the source found

    Ammonia fell by 98%, total nitrogen by 87% and phosphorus by 96%. Enough oxygen in the aerobic zone, kept by online control, was seen as the main reason for the high nitrogen removal in a cold climate, and the anaerobic tank in front gave higher phosphorus removal than a comparable plant without one.

    Daily inlet and outlet samples over one year, reported as 2013 averages, with dissolved oxygen checked in both zones by meter.

    Water in, water out

    ParameterSymbolUnitInletOutletRemoval
    BODBODmg/L3363.799%
    Ammonium nitrogenNH4-Nmg N/L35.80.798%
    Total nitrogenTNmg N/L567.187%
    Nitrate nitrogenNO3-Nmg N/L3.2
    Total phosphorusTPmg P/L70.2896%

    Inlet: raw sewage entering the oxidation ditch plant. Outlet: final effluent of the oxidation ditch plant. Yearly averages of daily samples for 2013. Values and units are as the published source prints them. Removal is worked out from the two values, or is the source's own figure where it prints no pair.

    Similar references