Treating town sewage for reuse in phosphate washing by activated sludge
The municipal sewage plant of Khouribga, in the Béni Mellal-Khénifra region of central Morocco, was commissioned in 2010 for 18,000 m³/day, about 220,000 population equivalents, and received an average of about 15,600 m³/day in 2025. Most of its treated water is used by a mining company to wash and hydraulically transport phosphate ore, sparing conventional water for drinking. Sludge is thickened and dewatered, and biogas from digestion covers part of the plant's energy needs.
Treatment line
- 01Coarse and fine screening
- 02Grit and grease removal
- 03Aeration basinsActivated sludge biological treatment.
- 04Two secondary clarifiersCircular clarifiers with scraper bridges.
- 05Filtration
- 06Disinfection and pumping
What the source found
Mean removal was 91% for suspended solids, 90% for COD and 94% for BOD, and every measurement met the national general discharge limits. Only a minority of samples met the much stricter tertiary objectives once set for the plant, so discharge compliance does not by itself show the water suits every industrial reuse. Flow explained little of the variation in removal, and COD removal was only slightly better in summer than in winter.
Daily operator records for all of 2025 at the plant inlet, after clarification and at the outlet, with BOD measured on 146 days and solids and COD on 363 days.
Water in, water out
| Parameter | Symbol | Unit | Inlet | Outlet | Removal |
|---|---|---|---|---|---|
| Total suspended solids | TSS | mg/L | 192 | 16.4 | 92% |
| COD | COD | mg O₂/L | 634 | 60.1 | 91% |
| BOD5 | BOD5 | mg O₂/L | 277 | 15 | 95% |
| Flow | m³/day | 15,612 | 15,019 | ||
| Temperature | °C | 18.3 | |||
| pH | 8.07 | ||||
| Faecal coliforms | FC | /100 mL | all 304 values ≤1.000/100 mL, 288 recorded as zero |
Inlet: raw wastewater at the plant inlet. Outlet: treated water at the plant outlet. Means of daily operator records over 2025 (363 days for solids and COD, 146 days for BOD5). Values and units are as the published source prints them. Removal is worked out from the two values, or is the source's own figure where it prints no pair.