Polishing UASB-treated sewage for BOD and COD in polishing ponds
A sewage works in Saharanpur, India, with a capacity of 38,000 m³/day treats sewage through screens, grit chambers and upflow anaerobic sludge blanket reactors, then sends the reactor effluent to polishing ponds. Only the polishing ponds are described here.
Treatment line
- 01Polishing pondsTwo ponds with a surface of 12,700 m² and 1.5 m depth, and a design retention time of one day.
What the source found
In the December 2010 campaign the ponds removed 49% of BOD, 45% of COD and 33% of suspended solids. Across the polishing ponds surveyed, the effluent did not meet the BOD and suspended solids disposal standards; their retention time was too short and they were judged to act mainly as clarifiers.
Grab samples of the reactor effluent entering the ponds and of the pond effluent in December 2010, one of five campaigns between 2007 and 2010.
Water in, water out
| Parameter | Symbol | Unit | Inlet | Outlet | Removal |
|---|---|---|---|---|---|
| Dissolved oxygen | DO | mg/L | 0 | 1.7 | |
| pH | 7.33 | 7.63 | |||
| Alkalinity | Alk | 289 | 269 | 6.9% | |
| BOD | BOD | mg/L | 51 | 26 | 49% |
| COD | COD | mg/L | 98 | 54 | 45% |
| Total suspended solids | TSS | mg/L | 58 | 39 | 33% |
| Volatile suspended solids | VSS | mg/L | 27 | 20 | 26% |
| Ammonium nitrogen | NH4-N | mg/L | 37 | 27 | 27% |
| Nitrate nitrogen | NO3-N | mg/L | 1.5 | 2.63 | 0% |
| Orthophosphate as phosphorus | PO4-P | mg/L | 4.13 | 3.27 | 21% |
| Redox potential | ORP | mV | 41 | 133 | |
| Sulfate | SO42− | mg/L | 35 | 37 | 0% |
| Sulfide | S2− | mg/L | 4.8 | 3.5 | 27% |
Inlet: reactor effluent entering the polishing ponds. Outlet: effluent of the polishing ponds. Grab samples in December 2010, one of five campaigns; values are means with their spread. Values and units are as the published source prints them. Removal is worked out from the two values, or is the source's own figure where it prints no pair. A parameter at 0% did not fall between the inlet and the outlet.