Aguato

    Heavy metal fate in town sewage through grit removal, primary settling and activated sludge

    A municipal activated sludge plant in Veszprém, Hungary, serving a small town and its surrounding villages, with sewage largely free of industrial metal discharges. It treats 13,000 m³ a day against a nominal 21,000 m³ a day, and digests its primary and secondary sludge before drying it. The work looked for streams where metals could be removed separately so the dried sludge could serve as a soil amendment.

    Treatment line

    1. 01Grit removalHad practically no effect on the metal content of the sewage.
    2. 02Primary clarifierRemoved little metal except manganese and iron.
    3. 03Activated sludgeSludge age near 20 days; the retention time in the plant is more than one day.

    What the source found

    Most of the metal load left the plant with the treated water: only about 13% of copper, nickel and chromium was removed, about 50% of manganese, while iron was removed by 99% and ended mainly in the secondary sludge. The centrifuge reject water carried back only 2 to 3% of the metal load, so treating it separately was judged not worthwhile. The dried digested sludge did not have high metal levels.

    Samples taken every other hour through the day over three one-week periods, combined weekly and analysed in triplicate, at the inlet, after each stage, at the outlet and in the sludge streams, to build a mass balance of eight metals.

    Water in, water out

    ParameterSymbolUnitInletOutletRemoval
    CadmiumCdmg dm-30.0230.021
    CobaltComg dm-30.1690.15210%
    ManganeseMnmg dm-30.1230.06250%
    NickelNimg dm-30.1230.10713%
    ChromiumCrmg dm-30.1850.16113%
    CopperCumg dm-30.2310.20213%
    IronFemg dm-37.9380.07999.0%
    LeadPbmg dm-3<0.001<0.001

    Inlet: raw wastewater at the plant inlet. Outlet: treated effluent at the plant outlet. Averages of weekly composite samples over three one-week periods, analysed in triplicate. Values and units are as the published source prints them. Removal is worked out from the two values, or is the source's own figure where it prints no pair.

    Similar references