COD and phosphorus removal from sewage by activated sludge with chemical precipitation
A municipal sewage works in the metropolitan area of Vienna, Austria, serves about 23,500 connected inhabitants from a mixed rural and urban catchment on combined sewers. It is designed for 40,000 population equivalents but carries an average load of about 49,000, so it is overloaded, and it was not designed to remove nitrate.
Treatment line
- 01Mechanical treatment
- 02Activated sludgeRemoves organic matter and converts ammonium to nitrate, without a denitrification stage.
- 03Chemical phosphorus precipitationIron and/or aluminium salts dosed to precipitate phosphorus.
What the source found
The works removed about 92% of COD and of total phosphorus, but only about half of the total nitrogen, less than the other plants compared, because it is overloaded and has no denitrification stage.
24-hour flow-proportional composite samples of the raw and treated sewage taken every 4 to 6 weeks over one year, reported as medians.
Water in, water out
| Parameter | Symbol | Unit | Inlet | Outlet | Removal |
|---|---|---|---|---|---|
| COD | COD | mg/L | 466 | 36 | 92% |
| Total phosphorus | TP | mg/L | 9.3 | 0.7 | 93% |
| Total nitrogen | TN | mg/L | 58 | 25 | |
| Nitrate nitrogen | NO3-N | mg/L | 21 | ||
| Ammonium nitrogen | NH4-N | mg/L | 0.3 |
Inlet: raw wastewater at the plant inlet. Outlet: treated wastewater at the plant outlet. Medians over one year of 24-hour flow-proportional composite samples. Values and units are as the published source prints them. Removal is worked out from the two values, or is the source's own figure where it prints no pair.