COD and suspended solids removal from industrial park wastewater by sequencing batch reactor
The central wastewater treatment plant of an industrial park in Ho Chi Minh City, Vietnam, takes wastewater from food processing, packaging, garment, textile and paper factories, with food industries giving most of it. The plant has an equalisation tank and a full-scale sequencing batch reactor. A membrane bioreactor pilot fed from the equalisation tank was run at the plant for comparison.
Treatment line
- 01Sequencing batch reactorOperated at a capacity of 2,000 m³/day with a 7-hour retention time; each cycle is 60 minutes feeding, 180 minutes feeding with aeration, 90 minutes settling and 60 minutes withdrawal.
What the source found
The reactor's treated water met the less strict of the two national discharge levels for industrial wastewater. Its colour was always higher than that of the membrane bioreactor pilot run alongside it.
Wastewater from the equalisation tank and the reactor effluent were analysed during a pilot study at the plant, and mean values with spread were reported.
Water in, water out
| Parameter | Symbol | Unit | Inlet | Outlet | Removal |
|---|---|---|---|---|---|
| Suspended solids | TSS | mg/L | 430 | 10 | 98% |
| Total Kjeldahl nitrogen | TKN | mg/L | 29 | ||
| COD | COD | mg/L | 350 | 36 | 90% |
| Phosphorus | P | mg/L | 11 | ||
| Turbidity | NTU | 439 | |||
| Colour | Pt-Co | 313 | 49 | 84% | |
| pH | 7 |
Inlet: wastewater in the equalisation tank. Outlet: effluent of the full-scale sequencing batch reactor. Mean values with spread over the pilot study period; the source reports the equalisation tank water and the reactor effluent in separate tables. Values and units are as the published source prints them. Removal is worked out from the two values, or is the source's own figure where it prints no pair.