Zero Liquid Discharge Use Case Companies

A-Consult specialise in providing solutions for the storage and handling of liquids in the agricultural, water industries and industrial sectors. Established in 1986 we have successfully constructed over 10,000 tanks throughout the United Kingdom and Europe. Aqua-Tank provides a safe, cost effective method of containment with numerous applications within the water, waste and industrial sectors. Guaranteed factory-controlled quality combined with a robust structure along with tried and tested design principles, offer life expectancy previously only achieved with cast in situ installations. A-Consult are the market leaders in the design, manufacture and installation of precast concrete storage tanks. SETTLEMENT TANKS Settlement tanks can be supplied with either an integrated concrete coping top which supports the travel of either a full or half bridge scraper. Tank sizes range from 4.0m diameter to greater than 50.0m, designed to allow backfilling, enabling access to M&E equipment such as scraper bridge, motor and travelling wheels. Incorporating the patented EPDM jointing seals, the post tensioned settlement tanks can be designed to accommodate pipe work entries through the precast wall panels. Design and constructed to BS8110 and BS8007 and compliant to all relevant Euro Codes. FILTER TANKS The A-Consult tank system has been used to construct many types of filter tanks. The tanks can be designed as water retaining structures if necessary, with letter box opens to facilitate the trickling filtration systems. PROCESS TANKS In such a volume related sector the A-Consult precast concrete tank system offers extensive flexibility in both tank diameters and wall heights. Diameters start at 4m and increase in increments of approximately 350mm, wall heights start at 2m and increase in increments of 100mm topping out at 12m. STORAGE TANKS A-Consult tanks have been used for the storage of many different materials on both wastewater treatment plants along with sewage treatment plants. All materials used in the construction of our tanks are DWI or WRAS approved allowing the storage of potable water. LEACHATE TANKS With a 50-year design life the A-Consult precast concrete tank system offers a cost effective and robust solution to many process and storage applications.

ACWA is one of the leading UK players delivering innovative sustainable process solutions and technologies for both municipal and industrial clean water, wastewater and bio-solids treatment. ACWA design and execute resilient cost-effective technologies which address the needs of our clients and their regulatory drivers whilst helping to address climate change. ACWA provides expert technical products and services to the water, wastewater and industrial sectors. Our expertise combines practical experience with academic knowledge across a wide range of specialisms. These include: Design and build (digital delivery and off-site manufacture) Commissioning Project management We apply our extensive expertise to help our clients find the best sustainable, cost-effective solutions that meet all their requirements. We serve our wholesale water, wastewater and biosolids markets plus industrial food and beverage clients with their water needs. Our primary specialist areas are: Water treatment Wastewater treatment Industrial effluent Food and beverage TECHNOLOGIES In finding the best solutions we look at innovative ideas and turn them into reality producing some of the most sustainable technological solutions on the market. Our technologies include: Nitreat® Ion Exchange: This is a reversible nitrate removal process by which ions are interchanged between a solid and a liquid with no substantial structural changes in the solid. AquaPyr™ Tertiary Solids Removal Filter: This process is a simple filter that can also remove phosphorous using innovative cleaning technology producing low waste and using less power than other filters. Amtreat® High Rate Ammonia Removal: This process is a high-rate activated sludge process designed to treat wastewater streams and sludge liquors containing high concentrations of ammonia. DESIGN & BUILD ACWA’s in-house design capability is the architecture on which each project is meticulously built. The latest 3D models create precision imaging of all types of installations from a complex water or effluent treatment plan to a single piece of equipment to be integrated into an existing system. Through in-house engineers ACWA deliver a complete range of technical design and build expertise across projects and programmes of work that include, civil, mechanical, process and electrical, instrumentation and control and automation. PROJECT MANAGEMENT ACWA’s team of highly-experienced project managers, engineers and technicians work closely with clients and key project team members to deliver solutions in an efficient, timely, cost-effective and environmentally-responsible manner. Project management includes ensuring complete compliance with all relevant regulations, both European, national and where relevant, international, while at all times maintaining a clear focus on the project remit. Our responsibility is to ensure each project is a complete success, both for our client and for the environment. We actively identify and manage risks, issues, changes to requirements and quality standards to guarantee the best possible outcome. COMMISSIONING For hands-on commissioning services, ACWA is an industry leader, focussed on complex water and wastewater facilities for municipal and industrial clients. Commissioning is an essential step in project delivery. Without it we cannot have assurance of a quality outcome. Our in-house team provides comprehensive commissioning services getting involved at project start-up to take the project through planning design, construction and turnover, on time and on budget. ACWA’s multi-disciplined knowledge and expertise includes, system design, electrical testing, operations and maintenance (incl. training) as well as systems and process diagnostics, providing an authoritative and effective resource. WATER TREATMENT Our water expertise comprehensively covers the filtration spectrum from conventional strainers and filtration systems to the most advanced reverse osmosis and ion exchange technologies. Microfiltration Ultrafiltration Nanofiltration Reverse Osmosis / Desalination Ion Exchange Conventional Water Treatment Pressure Filters Gravity Filters Chemical Treatment Granular Activated Carbon WASTEWATER TREATMENT The days of wastewater disposal by methods that had no consideration for the implications to the environment are over. As water scarcity increases and the pressure to comply with ever increasing environmental legislation for effective effluent treatment intensifies, it has never been more important to choose the right wastewater partner who can provide a range of effective processes. ACWA can deliver those solutions. Preliminary Treatment Aerobic Biological Treatment Anaerobic Treatment Membrane Bio Reactor High-Rate Ammonia Removal (Amtreat®) Scrubber Effluent Treatment Plant Effluent Re-use Tertiary Treatment Sludge Treatment

AJ Engineering & Construction Services Ltd provide a wide spectrum of engineering services ranging from steel fabrication and CNC machining to cladding and civil engineering, with our highly experienced team we provide on-time, on-budget quality solutions. From our bases in Forres and Fort William, and a team accustomed to travel we can meet our client’s needs wherever required. Having worked on various water and wastewater treatment projects for the past 25 years we have developed a great working relationship with water companies across the UK. Our in-house capabilities allow us to offer a turnkey service to our clients from reactive maintenance and manufacturing to planned infrastructure and non-infrastructure projects. Many of the projects we undertake in the water sector are within water treatment and wastewater treatment plants where cleanliness is paramount, all our water sector site teams hold certification and Water Hygiene cards. Our range of services collated into one means that we can take on multiple discipline contracts and deliver them as one which provides our clients with a number of advantages. It removes the need to have multiple contractors on site at once. Benefits in cost savings passed down on procuring large amounts of steel for a side wide project. Little risk of dimensional discrepancies between contractors We work alongside framework delivery partners throughout the UK providing the services below; Steel portal frame buildings (design, fabrication, erection & cladding) Design, manufacture and installation of pipe bridges Design, manufacture and installation of site wide access metalwork (walkways, access stairs, ladders etc) Design, manufacture and installation of modular water buildings transportable by road. Design of various process tanks, pipework and pumps. Fabrication of tanks and pipework (stainless and carbon) Mechanical Installation Modular Treatment Buildings and Mechanical Fit-out SR2 rated steel enclosures (quicker than GRP Kiosks) We appreciate how important quality and cleanliness is in the water sector and we are proud that we have completely segregated facilities for stainless steel and carbon steel. In addition to this we are also approved under the regulations 31(4)(A) of the water supply regulations 2016 to supply stainless steel and pipework fabrications to the drinking water sector.

Founded in 1985, UK-based Amazon Filters Ltd is one of Europe’s leading manufacturers and suppliers of bespoke filtration technology such as filter cartridges and housings. Our comprehensive range of products support critical liquid and gas applications in many industries. With over 40 years of continuous support to municipal water companies, we are ideally placed to solve water quality problems with our bespoke cartridge filtration technology. From small boundary boxes installations to large volume fully containerised system and rentable mobile skids, we can manufacture and supply it all. We offer solutions for: Turbidity Control Metals Removal (iron / manganese) Cryptosporidium removal Chlorine reduction Let us support your AMP 8 commitments: Securing Long Term Resilience Securing Cost Efficiency Securing Confidence and Assurance We operate a range of ISO-accredited Quality Management Systems to ensure excellence in customer service. We provide high quality, reliable products and services that exceed client expectations. We help you worry less about the filtration process so you can focus on what you do best.

Aquability OPS Ltd was established in 2015 and is a leading technical consultancy providing optimised process solutions in the wastewater treatment industry. We are trusted partners of water companies, contractors and consultants and a member of British Water - the trade body representing the supply chain to government and the water companies. Director, Nicola Henderson is a chartered Chemical Engineer with over 27 years experience in the water industry and is one of the UK’s leading SBR experts. She is well known in the industry and previous tenures include Director of British Water and Chairman of British Water’s Technical Forum and Municipal Group. After graduating from Bath University in 1990 with a degree in Chemical & Bio Process Engineering, Nicola started her career in wastewater treatment at British Steel, responsible for the operation of their water and wastewater treatment systems. She then spent 24 years working in the design and build arena where she gained widespread experience in the water industry across a number of fields. Aquability OPS draw on Nicola’s extensive experience to offer technical expertise and bid support in both municipal and industrial wastewater treatment. We combine a mix of technical knowledge and practical application, providing comprehensive, tailored services across four areas to provide: Process expertise to solve our clients’ wastewater treatment challenges. Leading SBR expertise to ensure your SBR plant is a success. Commissioning and operational support for effective commissioning and trouble free operation. Bid support to develop innovative cost effective solutions, focused and persuasive bid writing and creative, engaging presentations. Our services help our customers to win work, build knowledge, reduce delivery and operating costs and avoid compliance issues. Our goal is to deliver successful outcomes for our Clients and develop trusting and long lasting relationships.

Bramley Engineering ltd was established in Ivinghoe in 1981 by John & Davina Bramley following John’s apprenticeship and early career in South Africa. Now based in Leighton Buzzard and run since 2007 by Graham and Emma Bramley the company remains a family run business encompassing a hardworking, fun, and fair working ethos that benefits our customers, suppliers, and staff. Over the last 40 years the company has evolved to ensure it meets health and safety requirements, is up to date with legislation and has safe working practices. We became ISO registered in 2004 following a large project for the nuclear power sector, we have continued to develop our systems as demands and in-house practices have required it. Bramley Engineering manufactures many forms of lifting equipment including overhead cranes, gantries, monorails, jib cranes and davits. We specialise in bespoke lifting solutions and have over the years provided solutions for many varied situations. Using the latest in CAD technology Graham continues to improve and adapt his knowledge to the needs of the customer. Our customers are many and varied and include the water industry for whom we have been working for twenty-five years, construction companies both large and small and the rail sector. In 2018 we won a contract to provide a grid system of 18 cranes in Lincoln for Siemens rail, this project saw us win our first award for ‘working as one’ with the customer. This award was greatly appreciated as not only did it show the customers appreciation it reminded us that our working practices and ethos are in line with ‘lifting your expectations’. We are members of the Lifting Equipment Engineers Association (LEEA) whose knowledge and expertise are always on hand should we require assistance. They audit us annually and ensure we are up to date with latest legislation and that our working practices meet the needs of our customers. As well as the cranes and lifting solutions we provide LOLER examinations and sell all ‘below the hook’ lifting accessories. We have an online system that keeps records of all the equipment we have examined. Our customers can always have access to their certificates ensuring they are compliant with health and safety requirements. We hold stock of web and round slings, shackles and chain slings and welcome customers to visit our premises to discuss their needs. Bramley Engineering always welcome new and exciting challenges with both existing and new customers.  We relish the chance to expand our bespoke lifting portfolio and to use our extensive knowledge and innovative outlook to help others find their perfect lifting solution.  We are always striving to lift expectations.

Filter nozzles, spray nozzles, resin traps and filter floors Since 1985 Cadar has firmly established itself within the municipal and industrial water treatment markets as well as the food, pharmaceuticals and chemical industries where liquids that require processing through either media filters such as sand, ion-exchange resins and carbons. As a well known designer and supplier of filter nozzles and distribution systems, Cadar has used this platform to develop new products and systems. These include the highly successful monolithic cast in place concrete filter floor and more diverse products such as resin traps, air scour systems, header and lateral under drains, and spray nozzles. Whichever the product, Cadar will continue to maintain its reputation for personal services both before and after sales.

Costain works with water and wastewater companies to shape, create and deliver pioneering solutions that improve water quality, affordability and resilience. Population growth, regulatory changes, energy costs and climate change are having a dramatic impact on water usage. The national approach to managing water supply is changing to meet these challenges. The Government and industry regulator are tasked with cutting wastage and preserving an increasingly valuable resource, while protecting consumers from higher water bills. The water sector team offers: Expert input into consultation documents, close work with Government and water companies and innovative delivery, all of which help to minimise costs to water users while meeting national investment needs. A manufacturing mindset: programme optimisation advisory services, standard product development, production controls, whole-life costing and lean delivery processes. Cross-sector best practice: we provide value for our clients by drawing on experience from across the company and by working closely with our decarbonisation experts to drive regional growth strategies. Technology integration: working with some of the UK’s leading asset and data analytics organisations we analyse large volumes of real time data to create greater benefits for our customers through optimised maintenance, pump operation, energy and chemical usage. Current water industry frameworks: Anglian Water – Strategic Pipeline Alliance Severn Trent Southern Water – CMDP JV Thames Water United Utilities – Maintenance Service Provider Yorkshire Water – Technical Services

With over 35 years experience and knowledge of manufacturing variable speed electrical control systems, Drive Systems Ltd provide fixed and variable speed drives, control panels and will commission and install both the mechanical equipment and electrical supplies, as required. Drive Systems Limited is a wholly owned independent company founded in 1986 by its present directors to promote the use of packaged inverter drive systems into a wide range of industrial applications so that they could benefit from the flexibility of control and the large potential energy savings that this, then, emerging new technology could provide. Many areas of industry, from pet food manufacturers to woodworking machine makers and from the nuclear industry to the water companies became valued customers and benefited from bespoke packaged drive systems tailored to their specific application. The water companies soon became the source of the majority of the companies workload, with inverter based drive systems being developed for wet well submersible pump systems, rectangular bacteria bed distributors (both rope hauled and independently driven) and for circular filter bed distributor drives. This latter drive system, enjoying patent protection of its principles of operation, has been a huge success and over 2000 systems have been supplied into all of the UK`s Water Companies, as well as to numerous overseas locations. Drive Systems has recognised the need, not only to provide products and packaged control systems, but also to provide an installation and commissioning service which ensures optimised performance from the existing plant. Drive Systems site programme includes installation of both mechanical and electrical equipment on prepared foundations. The service is not complete without the inter connection of all items of equipment, including cables, cable trays and ducts, as required. Lighting, heating, ventilation are a natural extension of this work. Drive Systems can provide Fixed and variable speed drives for pumps and fans Control panels and cabinets designed for specific applications Percolating circular filter bed drives and control Percolating rectangular filter bed drives and control Complete installation both mechanical: cabling and electrical supplies Commissioning and test Servicing and repairs

ELIQUO HYDROK works with all major UK and Ireland water companies, providing practical water engineering solutions. As a specialist engineering firm with head office in Indian Queens, ELIQUO HYDROK operates at the forefront of innovative and sustainable water treatment technologies. We support the entire UK water sector, supplying every water company. Part of ELIQUO WATER GROUP, the extensive portfolio includes solutions for wastewater management, wastewater treatment, clean water treatment and surface water management; Mecana PCMF, aeration technologies, CSO screens, flow controls, storm tank flushing and Raw Water Intake Screens. Plus, a sludge treatment portfolio that helps reduce costs, improve efficiency, and meet environmental compliance requirements – through systems like ELOVAC® for vacuum degassing, and other integrated technologies in biogas, digestion, dewatering and drying. With established teams in Cornwall, Wolverhampton and Wombwell, ELIQUO HYDROK are well-equipped to support operations – from start to finish; with design, manufacture, management and install capabilities – across the UK and Ireland. This wealth of in-house expertise is backed by a forward-thinking mindset to help customers achieve their long-term goals sustainably; to deliver results in AMP 8 and beyond.

EMS are a UK based manufacturer of positive displacement ram pumps and grit removal solutions used traditionally in the wastewater industries but also in the food waste (AD) sector. EMS Industries was established in 1995 and has since grown into a world-renowned name for providing robust, reliable products which have provided our substantial client list with many years of trouble free service. All EMS products are designed, manufactured and tested in our Stoke on Trent operational facilities where we can also offer additional services including spare parts, service and repairs, installation, commissioning, operator training packages and full CAD and 3D modelling services. As a framework provider to some of the major UK utility companies, we ensure that our products meet with all current legislation and continually strive to provide innovative products to the market place.

ERG (Air Pollution Control) Limited is the leading supplier of wastewater odour control units (OCUs) for the UK Water Industry and increasingly supplies odour control systems around the world. In addition, ERG can provide specialist advice and solutions to assist in achieving IED compliance for relevant odour assets. In the past 10 years, we have provided over 200 OCUs and count all the UK water companies and major main contractors among our clients. So, whether you are looking for a large, multi-stage chemical scrubbing system, an environmentally friendly bio-trickling filter or bio-scrubber system, a simple but efficient activated carbon or dry media system, an Odorgard™ from ERG Hygrade, or even an RTO (Regenerative Thermal Oxidiser) system, ERG can develop a tailor-made solution to suit. All ERG Odour Control Systems are: Purpose-designed by our process engineers to eliminate the cocktail of inlet odours to the required standard. Optimised to give the best value capital and running costs. Built and tested to current BS EN and WIMES specifications. Guaranteed to achieve the required discharge odour concentration and supported by our skilled and experienced maintenance team. Minimising non-compliant emissions to atmosphere by regular, planned maintenance protects your reputation and saves you money. Our maintenance department can help keep your air pollution and odour control systems running effectively and at the lowest operating costs. Our specialist engineers are experts in maintaining most types of odour and air pollution control equipment and always work to the highest safety standards. We often save clients many thousands of pounds by repairing and enhancing dilapidated air pollution and odour control equipment. We are a framework supplier for odour control maintenance to Southern Water, Scottish Water and Thames Water, regularly maintaining more than 120 sites.

A leading supplier of progressive wastewater treatment systems Evergreen Water Solutions works closely with a number of international engineering companies whose expertise are in scalable wastewater treatment systems and containerised wastewater treatment systems for municipal and industrial application. Evergreen Water Solutions offers a comprehensive engineering service. Our company incorporates initial design and planning, to implementation of projects that are delivered on time and on budget. Our expertise in wastewater treatment covers infrastructure development, package sewage treatment systems and advanced treatment technology for wastewater recycling with the strictest treatment requirements. The goal of Evergreen Water Solutions is to exceed the expectations of our clients, foster long-term relationships, and make a positive impact on the environment and industry standards. Evergreen Water Solutions use innovative products and suppliers to source, design and implement leading environmental water and wastewater treatment products and solutions. All new equipment and suppliers are required to undergo pre-qualification program and a series of acceptances and trials are applied prior to the approval of the vendor. Evergreen Water Solutions’ pre-qualification program guarantees you our clients that the products we source are of the highest standard within the industry, these products along with the expertise within Evergreen Water Solutions ensures that the solution we provide will meet and exceed any expectation you might have.

Ductile Iron Pipe and Fittings FT Ductile supplies a wide range of high quality, ductile iron pipes, fittings and ancillary products to the water industry for both potable and dirty water. Large stocks at our premises allow us to fulfil many orders on a next-day basis. Whatever the size of project, we can provide a tailor-made solution to include the sourcing, supply, delivery and after sales service. We supply ductile iron pipes in a range of diameters, from 80mm to 1600mm. Over the years, the range of products supplied by FT Ductile has expanded to include everything from ductile iron pipes to flange adaptors and valves. We have a number of exclusive distribution agreements in place and all products conform to DWI standards. Ductile iron pipes are most commonly used for drinking water and sewage distribution, usually lined with cement mortar in order to prevent corrosion over time. The benefit of using ductile iron pipes in potable and waste water systems is that they are stronger and resistant to fracture. FT Ductile has supply chain links with companies in Europe, USA and the Far East which has given us strong foundations for understanding how other cultures and nationalities like to do business. This information is invaluable when we come to export our pipe products and services. Wherever you are based, and whatever you require, from individual items such as valves and fittings, through to more complex orders for lengths of ductile pipe and fittings, we will provide you with our best possible price. And you can rest assured that through our extensive transport links, our products will reach you in a safe and timely manner. To find out more regarding our ductile iron pipes and other products, please feel free to contact us.

Galliford Try is a leading UK construction business employing over 4,000 people across the country. We are a people-orientated, progressive business, driven by our values to deliver lasting change for our stakeholders and the communities we work in. We are passionate about our role in providing vital buildings and infrastructure across the country, committed to the idea that what we do makes a real difference to people’s lives. Our purpose, vision and values shape our culture, proactively guiding our day-to-day activities and keeping us focused on what’s important to us. We take our role in society seriously, working to improve the UK’s built environment and delivering lasting change for the communities we work in. Our purpose is to improve people’s lives through building the facilities and infrastructure that communities need, providing opportunities for our people to learn, grow and progress, working with our supply chain to promote the very best working practice and caring for the environment in which we work. We do this by holding true to our values, delivering excellence for our clients and the community, being passionate about our role in providing vital services, putting integrity at the heart of our business by doing the right thing, and collaborating with our clients, supply chain and stakeholders to deliver lasting change and long-term value. Galliford Try is unrivalled in the water sector, with 95% of our work delivered through long-term collaborative arrangements. As our clients look to invest in an ageing asset base, we are well positioned to serve their needs across capital delivery and maintenance, and asset optimisation. Coupled with our approach to digitalisation, carbon reduction and innovation, our adoption of off-site build Design for Manufacture and Assembly is increasingly supporting our clients to achieve their objectives of net zero carbon, lower cost and shorter programme duration. We work on both frameworks and standalone projects, collaborating with our partners to ensure we offer a multi-disciplined approach that can deal with the significant challenges and complexity of outcome-based solutions in the sector. At Galliford Try, we’re proud to support the water sector with sustainable, innovative solutions that create lasting value for communities and the environment. #WaterSector #GallifordTry #Sustainability #Collaboration

GoFlo screens are designed and manufactured in Stroud, Gloucestershire, UK, meaning our expertise and support is never far away.  The screens are all stainless-steel structural construction (including the mesh belt), with self-lubricating polymer bearings on the driveshafts, UHMW rubbing strips for the mesh belt and Acetal drive sprockets.  All of the polymer materials have been tested to ensure Regulation 31 compliance for the overall GoFlo system. Our screens can be supplied with a bar-spacing down to 1.8 mm to ensure compliance with the Eel Regulations or strictest fisheries regulations.  They are self-cleaning and incorporate debris flights to carry the debris up the screen, an inside-outwards high pressure debris spray boom and integrated debris trough and return channel.  Ourscreens use an innovative mounting system, enabling them to be quickly lifted in and out, and on re-installation they are guided precisely into position without the need for divers, even into flooded intakes.  We can supply just the screens, or a complete system including debris trough and return channel and walkways. We design our systems in 3D and work closely with our clients to design an optimised overall solution to meet their requirements.  Water Utility clients include Southern Water, Southwest Water, Wessex Water and Welsh Water, along with various hydropower operators who use our screens.  We are always keen to help solve your problems; recent innovations include an ‘intake box’ system that allowed our screens to be installed by divers without having to de-water a 4.5 metre deep live intake that could not be taken offline for more than 8 hours, and a recent slide in/slide out mounting system that allowed our screens to be installed underneath live 11 kV powerlines – in both cases our innovations saved the client substantial amounts of money. If you have a new intake project or have to upgrade an existing intake to be Eel Regs or fisheries compliant, we are keen to find out more.  We are happy to provide a budget proposal and initial design/3D model at no cost, so please get in touch.

A specialist engineering company with a global customer base. Greenbank provides a wide range of products and services to companies operating across a number of industries and is now establishing itself in the clean and wastewater sector. For many years the company has utilised the unique properties of volcanic basalt for lining products used in heavy industries such as power generation and minerals extraction. In partnership with Czech firm Eutit, the company has also been pioneering the use of basalt in the renovation and restoration of sewer systems in central European following a series of successful projects in Prague. As a result of devastating floods, the city’s sewer system was extensively rebuilt and upgraded with basalt being used in a number of key locations to provide a new level of security to the system. More than a decade on, the new system continues to perform well and has set a standard that’s now been followed in other European cities. Well suited for the most demanding of applications, thanks to the partnership between Greenbank and Eutit, a wide range of basalt solutions are now available in the UK market. These include products and systems that bring a wide range of benefits to the industry, including: Basalt tiles that can also be used to line existing brickwork, a more cost-effective solution than full replacement, and their reduced drag co-efficient means improved flow – in effect a smaller-diameter pipe or tunnel lined with basalt can carry a higher volume of water than a larger one with traditional brick surfaces. The effective life expectancy of basalt-lined sewer systems is between 100 and 200 years, thanks to their excellent resistance to abrasion and chemical damage – as well as the rigours of high-pressure water jetting that’s often used to clear unwanted blockages. For larger round or ovoid systems, basalt can be used in the lower sections to deal with the wear and tear with concrete upper sections to provide optimum life performance. Alternatively, steel pipes lined with basalt can be produced up to 3000mm diameter producing a lighter therefore lower cost installation option to thick wall concrete. Ease of installation and reduced maintenance costs make basalt ideal for bottom gutters, branch pipes and tubes and slip-resistant elements for walkways, and Greenbank can also supply bespoke-shaped tiles to meet the unique requirements of individual clients. With manufacturing facilities in Derbyshire and Nottinghamshire, supported by the additional capacity and expertise provided by the latest addition to the group, Franklyn Yates Engineering, Greenbank is well placed to react quickly and efficiently to the needs of new and existing clients.

Hayes GFS Ltd are recognised throughout the water industry as experts in the supply, installation and refurbishment of glass-fused-to-steel tanks, epoxy coated tanks and stainless steel tanks, from anaerobic digesters to potable water storage solutions to Nerada tanks. Our experience as framework suppliers to many UK water companies and having worked on projects throughout the Europe, America and the Middle East, has given us an unprecedented insight into the needs and demands of a variety of distinguished clients. Services include: The supply and installation of Permastore glass-fused-to-steel tanks and silos, fusion bonded epoxy, stainless steel tanks and GRP roofs. On-site tank surveys and condition reports. Emergency repairs. Refurbishment and replacement of existing tanks and roofs. Design, manufacture, supply and retrospective fitting of all tank related ancillaries, including access steelwork, decant pipework, tank Insulation and cladding.

Headlight AI is a UK based technology company developing sensing, mapping, and inspection solutions for extreme environments. The company works primarily with Utility companies and contractors to provide condition assessment and geo-location data in subterranean locations, especially for large diameter assets (such as sewers, culverts, and tunnels with diameters >900mm), with a focus on autonomous or semi-autonomous systems that avoid the need for person-entry (in particular NC3 or NC4 confined space entry), improving workers’ health and safety. The company supplies its award winning product, Telesto, to utility companies and contractors in order for them to collect multi-sensor data, including LiDAR, on either robotic or floating platforms. The data is then processed to account for the motion of the system and to produce 3D point cloud and multi-image data for further analysis. Users can access the information via the web-based Telesto application, which provides condition assessment dashboards and statistics relevant to the asset, achieved using novel artificial intelligence (AI) models. The company currently has several other products and features in development to further assist with underground inspections and surveys, and provide new ways to navigate and locate in GPS-denied and extreme environments.

At Industrial Pipework Services, we provide bespoke engineering services. With over 25 years’ experience IPS can offer complete mechanical engineering solutions including design, manufacture & installation services. Our experienced workforce are trained to the highest standards. IPS is situated within easy access to the M4 corridor approximately 30 minutes North of Cardiff. The company embraces innovative thinking while utilising the latest technology. IPS operating base comprises of 30,000 square foot of workshops, offices and assembly areas.  The Workshops are fully segregated for the manufacture of both carbon steel and stainless-steel products and are serviced by dedicated overhead gantry cranes. With over two decades of engineering experience the company strives to combine first class engineering and design to deliver the high quality that is required.  The Company maintains a proactive approach, working closely with our Clients to achieve our collective aims for each scheme. This ambition is underpinned by an uncompromising commitment to attain the highest standards of health, safety and environmental care. IPS provides continued excellence in design, manufacturing and installation gained from many years experience within the industry. Our In-House design capability allows the company to provide a full engineering design service using the latest Auto CAD software packages. IPS offers a design service for both pipework and steelwork systems from proposal drawings to the production of as built drawings. IPS Design Office provides all relevant AutoCAD drawings for steelwork and pipework, Isometric drawings for fabrication, general layout drawings for plant and equipment and As Built drawings. Structural steelwork calculations and flow characteristics are also provided as required. IPS offer a full 3D surveying services and production of cloud point data for project modelling. IPS operates primarily within the Water Industry and provides services for both clean water and sewage. IPS is a Tier One Mechanical Engineering Specialists Provider to Dŵr Cymru Welsh Water and the Strategic Alliance. IPS operate nationally and have delivered projects throughout the UK for many Water Utility companies including Anglian Water, Thames Water and Bristol Water. Continual improvement into our infrastructure and the development of new IT systems has brought us to a level consistent with the requirements of our clients. IPS offers a complete project management service, including operation of Principal Contractor role as well as delivering turnkey projects. Experience gained in the water industry has enabled us to manage the competing demands of cost, quality and safety for all our projects.