Aguato

    COD and nitrogen removal from dye wastewater by two-stage activated sludge with bioaugmentation

    A textile dye wastewater treatment plant in Daegu, South Korea, routinely treats 15,000 m³/day at 25 to 35 °C with a two-stage activated sludge process. Part of the sludge, 400 m³/day, is screened and digested for 54 hours in a 900 m³ tank dosed with a cultured microbial consortium, then returned to the buffering tank, with the aim of cutting sludge production. An influent tank and a buffering tank come before the units listed, and a tertiary sedimentation tank comes after them.

    Treatment line

    1. 01Primary aeration tankFirst activated sludge stage.
    2. 02Primary sedimentation tank
    3. 03Secondary aeration tankSecond activated sludge stage.
    4. 04Secondary sedimentation tank

    What the source found

    Before the consortium was added the plant removed 48% of total nitrogen and 92% of phosphorus. After dosing, total nitrogen removal rose to between 63% and 81%, COD and colour removal also improved, and sludge produced per tonne of influent COD fell by 22%. The plant met its treated water standards and the approach was judged economical.

    Single-day samples across the treatment stages taken 67 days before and 50, 300 and 531 days after the consortium was first dosed, with monthly operating averages for sludge and metagenomic sequencing of the biomass. The removal figures are from the one sampling day before dosing began, taken at the buffering tank and after secondary sedimentation.

    Water in, water out

    ParameterSymbolUnitInletOutletRemoval
    CODCODmg/L58420.697%
    Total nitrogenTNmg/L36.218.848%
    Total phosphorusTPmg/L5.10.4392%
    AmmoniaNH3mg/L14.88.9
    NitriteNO2−mg/L1.70.382%
    NitrateNO3−mg/L7.70.890%
    PhosphatePO43−mg/L3.40.294%
    Suspended solidsTSS64%
    Colour66%

    Inlet: buffering tank ahead of the first aeration tank. Outlet: outlet of the secondary sedimentation tank. One sampling day in March 2017, before the microbial consortium was dosed. Values and units are as the published source prints them. Removal is worked out from the two values, or is the source's own figure where it prints no pair.

    Similar references