COD and BOD reduction in local dye effluent by bacterial biodegradation in flasks
Effluent samples were taken at the discharge pipe of a local dye works in Surulere, Lagos, Nigeria, together with samples from a pharmaceutical and a textile plant. The dye effluent was the strongest of the three and was strongly alkaline. It was treated in laboratory flasks with a bacterium isolated from the effluent itself, not in a treatment plant.
Treatment line
- 01Neutralisation and nutrient additionA mineral salt medium was added and the effluent neutralised with sodium hydroxide or hydrochloric acid.
- 02SterilisationThe flasks of 100 ml effluent were autoclaved at 121 °C for 15 minutes.
- 03Bacterial biodegradationEach flask was inoculated with a bacillus isolated from the dye effluent and incubated for 21 days.
What the source found
After 21 days COD fell by 78% and BOD by 77%, while suspended solids fell by 27% and dissolved solids by 33%. Every parameter measured, zinc included, was lower after treatment, and the method was judged low in cost and free of added chemicals.
Effluent was analysed before and after a 21-day flask incubation, with acidity recorded every 48 hours. The before figures are those of the effluent as collected.
Water in, water out
| Parameter | Symbol | Unit | Inlet | Outlet | Removal |
|---|---|---|---|---|---|
| pH | 12 | 6.68 | |||
| Temperature | °C | 26.4 | 25.4 | ||
| Electrical conductivity | EC | μScm−1 | 24,500 | 16,650 | |
| Dissolved oxygen | DO | mg/L | 10 | 3.8 | |
| Turbidity | Formazin Turbidity Unit | 3,550 | 2,500 | 30% | |
| Total suspended solids | TSS | mg/L | 7,100 | 5,200 | 27% |
| Total dissolved solids | TDS | mg/L | 12,500 | 8,325 | 33% |
| COD | COD | mg/L | 290 | 63 | 78% |
| BOD | BOD | mg/L | 150 | 34 | 77% |
| Cadmium | Cd | mg/L | 0.03 | 0.014 | 53% |
| Nickel | Ni | mg/L | 0.012 | 0.005 | 58% |
| Zinc | Zn | mg/L | 1.69 | 0.94 |
Inlet: dye effluent as collected at the discharge pipe. Outlet: flask contents after 21 days with the bacterium. Effluent before treatment and after a 21-day flask incubation. Values and units are as the published source prints them. Removal is worked out from the two values, or is the source's own figure where it prints no pair.