Aguato

    Heavy metal removal from electroplating wastewater by carbon nanotube adsorption

    Raw wastewater from an industrial electroplating operation, strongly acidic and loaded with iron, zinc, nickel, copper, chromium, arsenic, lead and cadmium, was treated in flasks with carbon nanotubes made for the purpose. Two adsorbents were compared: purified nanotubes and nanotubes functionalised with a biodegradable polymer (polyhydroxybutyrate).

    Treatment line

    1. 01Batch adsorption on carbon nanotubesSmall doses of nanotube powder were shaken with 50 cm³ portions of the wastewater for up to 80 minutes, with equilibrium reached at 70 minutes.
    2. 02FiltrationThe spent adsorbent was filtered out before the treated water was analysed.

    What the source found

    Both adsorbents removed several metals at once from the raw wastewater, with removal driven mostly by the adsorbent dose. With the purified nanotubes, copper and zinc fell by about 94%, nickel by 92% and chromium by above 99%. The treated water was judged fit for industrial reuse or irrigation, and the polymer-functionalised nanotubes were rated the better adsorbent overall.

    Flask tests varying contact time, adsorbent dose and temperature, with each metal measured twice by atomic absorption before and after treatment.

    Water in, water out

    ParameterSymbolUnitInletOutletRemoval
    pH0.835.63
    IronFemg/L127.518.0186%
    NickelNimg/L106.18.232592%
    CadmiumCdmg/L3.020.0499%
    LeadPbmg/L4.940.01699.7%
    CopperCumg/L97.575.857594%
    ZincZnmg/L167.610.0994%
    ChromiumCrmg/L72.340.13699.8%
    ArsenicAsmg/L58.030>99.9%

    Inlet: raw electroplating wastewater. Outlet: filtered water after batch adsorption on purified carbon nanotubes. Means of duplicate measurements before and after batch adsorption. Values and units are as the published source prints them. Removal is worked out from the two values, or is the source's own figure where it prints no pair.

    Similar references