COD and solids removal from bottled milk wastewater by coagulation and activated sludge
A factory in Pasuruan, East Java, Indonesia, makes flavoured bottled milk around the clock from 40 to 50 tonnes of fresh milk a day. Wastewater from production, rejected product, offices, toilets and kitchens is treated in a 400 m² plant and discharged to the nearest river. The plant received on average 96.9 m³/day, about 1.18 litres of wastewater per litre of milk produced.
Treatment line
- 01Bar screen
- 02Grease trapRemoves oil, fat and some solids.
- 03Equalisation tank
- 04Coagulation and flocculation
- 05Primary clarifierSettles the chemical flocs; sludge goes to thickening and drying beds.
- 06Aeration tankActivated sludge.
- 07Secondary clarifierSludge goes to thickening and drying beds.
- 08Control tankTreated water then flows to the nearest river.
What the source found
The plant removed 98% of COD and 95% of suspended solids, and the treated water met the applicable discharge standard for both. The largest COD removal took place in the activated sludge stage. Coagulation and primary settling added little COD removal but raised solids removal considerably.
Daily flow measurement and daily samples at the inlet, equalisation tank, primary clarifier, aeration tank and outlet over 35 days, analysed in the factory laboratory.
Water in, water out
| Parameter | Symbol | Unit | Inlet | Outlet | Removal |
|---|---|---|---|---|---|
| Temperature | °C | 31.3 | 29.2 | ||
| pH | 7.6 | 7.8 | |||
| Total suspended solids | TSS | mg/L | 417.5 | 22 | 95% |
| COD | COD | mg/L | 1,381.3 | 26.8 | 98% |
Inlet: wastewater at the plant inlet. Outlet: treated water at the plant outlet. Means of daily samples over 35 days. Values and units are as the published source prints them. Removal is worked out from the two values, or is the source's own figure where it prints no pair.