Sulphate and chromium reduction in tannery wastewater by an indigenous bacterium in flask tests
Raw effluent was taken at the discharge point of a tannery in the Jajmau leather area of Kanpur, Uttar Pradesh, and treated in the laboratory with bacteria isolated from tannery sludge from the same industrial area. The water carried high sulphate, chromium and organic load. Three native strains were each tested alone to see which could clean the effluent.
Treatment line
- 01Bacterial treatment in flasksSterilised raw effluent of 100 millilitres per flask was inoculated with one indigenous bacterial strain and kept static in the dark at about 30 °C for 5 days, with no added nutrients or carbon.
What the source found
The best strain removed 80% of COD, 86% of BOD, 68% of sulphate and 73% of chromium, bringing sulphate below the national permissible level and BOD close to it. Artemia larvae survived and grew better in the treated effluent than in the untreated one. Field trials are still needed before the strain can be used in practice.
Treated and untreated effluent were analysed after 5 days of incubation, in triplicate, and toxicity was checked with Artemia larvae.
Water in, water out
| Parameter | Symbol | Unit | Inlet | Outlet | Removal |
|---|---|---|---|---|---|
| COD | COD | mg/L | 2,200 | 440 | 80% |
| BOD | BOD | mg/L | 833 | 86% | |
| Chromium | Cr | mg/L | 44.61 | 12.17 | 73% |
| Sulphate | SO42− | mg/L | 1,661.2 | 531 | 68% |
| Nitrate | NO3− | mg/L | 7.6 | ||
| Phosphate | PO43− | mg/L | 5.65 |
Inlet: raw tannery effluent before bacterial treatment. Outlet: effluent after 5 days of treatment with the best bacterial strain. Laboratory flask test, triplicate means; raw values are means plus or minus SD, treated values are for the best strain after 5 days. Values and units are as the published source prints them. Removal is worked out from the two values, or is the source's own figure where it prints no pair.