BOD and oil and grease removal from palm oil mill effluent by anaerobic and facultative ponds
A palm oil mill in Pasaman Barat Regency, West Sumatra, treats its hot, high-strength mill effluent in a series of ponds. The treated water is held in a final pond before discharge or land application. Nearby river water, a community well and the pond embankment soils were screened as well.
Treatment line
- 01Sludge pitInlet of the treatment line, where the raw effluent was sampled.
- 02Acid pondsTwo ponds.
- 03Anaerobic pondsFour ponds, for anaerobic breakdown of the organic load.
- 04Facultative pondFurther biological treatment after the anaerobic ponds.
- 05Buffer pondHolds the treated effluent before discharge or land application; the outlet sample was taken here.
What the source found
The ponds removed about 97% of BOD, above 99% of oil and grease and 93% of total nitrogen. Even so, the effluent did not meet the national discharge limits for BOD, COD and total nitrogen, while it did meet the limit for oil and grease. The inlet COD result was inconsistent and needs checking, and repeated seasonal monitoring is recommended.
One sampling event at the inlet and outlet, treated as a preliminary screening rather than proof of performance.
Water in, water out
| Parameter | Symbol | Unit | Inlet | Outlet | Removal |
|---|---|---|---|---|---|
| Temperature | °C | 46.2 | 30.1 | ||
| BOD5 | BOD5 | mg/L | 10,155 | 303 | 97% |
| COD | COD | mg/L | 51.4 | 1,482 | |
| Oil and grease | O&G | mg/L | 3,044 | 2.2 | 99.9% |
| Total nitrogen as N | TN | mg/L | 1,118 | 82.4 | 93% |
Inlet: raw mill effluent at the sludge pit, the plant inlet. Outlet: treated effluent in the buffer pond, the plant outlet. One sampling event at the inlet and outlet. Values and units are as the published source prints them. Removal is worked out from the two values, or is the source's own figure where it prints no pair.