BOD and COD removal from sewage by two waste stabilisation ponds in series
A sugar company in Tanzania collects the sewage of its resident population and sends it through a pumping station to a pair of stabilisation ponds. The ponds discharge to a river whose water is used downstream as raw drinking water. The flow is about 600 m³/day, and the company reviewed the ponds because its population was growing.
Treatment line
- 01Large stabilisation pond65 by 161 m; earlier called anaerobic, but by its layout and depth it is regarded as a facultative pond.
- 02Small stabilisation pond65 by 25 m; earlier called facultative, but it is regarded as a maturation pond.
What the source found
The effluent did not meet the standards for discharge, and E. coli in the outflow stayed high. The ponds do not match either standard pond layout, and a redesign with added ponds, with or without an anaerobic first pond, was proposed.
Inlet and outlet samples taken in the morning, at noon and in the evening, plus river samples above and below the outfall; the flow was estimated from population and checked with an ultrasonic meter.
Water in, water out
| Parameter | Symbol | Unit | Inlet | Outlet | Removal |
|---|---|---|---|---|---|
| pH | 7.29 | 7.01 | |||
| Turbidity | FTU | 58 | 12 | 79% | |
| Total dissolved solids | TDS | mg/l | 310 | 165 | 47% |
| Electrical conductivity | EC | µS/cm | 499 | 381 | |
| Colour | mg Pt.Co/l | 126 | 67 | 47% | |
| Total suspended solids | TSS | mg/l | 288 | 173 | 40% |
| Nitrate | NO3− | mg/l | 0.83 | 0.76 | 8.4% |
| Sulfate | SO42− | mg/l | 20.38 | 16.32 | 20% |
| Orthophosphate | PO43− | mg/l | 7.42 | 5.28 | 29% |
| Residual chlorine | Cl2 | mg/l | 0.16 | 0.04 | |
| Dissolved oxygen | DO | mg/l | 1.41 | 3.4 | |
| BOD5 | BOD5 | mg/l | 75.6 | 41.3 | 45% |
| COD | COD | mg/l | 301 | 112 | 63% |
| Escherichia coli | No./100 ml | 200,000 | 73,000 | 64% |
Inlet: raw sewage entering the stabilisation ponds. Outlet: outlet of the last stabilisation pond. Averages of samples taken in the morning, at noon and in the evening. Values and units are as the published source prints them. Removal is worked out from the two values, or is the source's own figure where it prints no pair.