Aguato

    BOD and COD removal from town sewage by activated sludge with clarifiers and chlorination

    The municipal sewage treatment plant of Maghnia, in Tlemcen province in the semi-arid north-west of the country, serves about 150,000 inhabitants and has run since 1999. It was designed for 30,000 m³/day and treats an average of 29,400 m³/day, and the treated water is discharged to a stream.

    Treatment line

    1. 01ScreensPreliminary treatment.
    2. 02Grit removalPreliminary treatment.
    3. 03Activated sludge aeration tanksSlow-rotating surface aerators with on-off automatic dissolved oxygen control.
    4. 04ClarifiersSettled sludge is returned to the aeration tanks and the excess goes to sludge drying beds.
    5. 05Chlorination and disinfection unitTertiary treatment before discharge.

    What the source found

    The plant removed about 95% of BOD, 91% of COD and 91% of suspended solids, but only about 38% of ammonium, and phosphate was not removed because the plant has no phosphorus removal step. Most effluent samples exceeded the international thresholds for suspended solids and ammonium. The simulation model predicted effluent COD well but suspended solids and ammonium less well.

    56 samples of the plant influent and effluent, taken one to four times a month from July 2021 to January 2023, were used to calibrate a process simulation model of the activated sludge stage.

    Water in, water out

    ParameterSymbolUnitInletOutletRemoval
    Total suspended solidsTSSmg/L280.4424.3991%
    BODBODmgO2/L467.5222.6895%
    CODCODmgCOD/L719.0467.7191%
    Ammonium nitrogenNH4-NmgN/L54.3133.5438%
    Nitrate nitrogenNO3-NmgN/L0.510.2355%
    Nitrite nitrogenNO2-NmgN/L0.40.175%
    Phosphate phosphorusPO4-Pmg/L12.6513.03
    Temperature°C24.8524.68
    pH7.637.62

    Inlet: raw sewage at the plant inlet. Outlet: treated effluent at the plant outlet. Means of 56 samples of influent and effluent taken from July 2021 to January 2023. Values and units are as the published source prints them. Removal is worked out from the two values, or is the source's own figure where it prints no pair.

    Similar references