Aguato

    COD and nitrogen removal from corn starch wastewater by IC reactor, two-stage A/O and Fenton

    The plant treats wastewater from a corn starch producer in Binzhou, Shandong Province. Corn starch wastewater comes mainly from corn washing, steeping and germ separation. The plant was designed for 800 m³/day and has run since May 2018, discharging to the local standard; its sludge is thickened and dewatered on a screw press before disposal.

    Treatment line

    1. 01Lifting poolA 300 m³ pool that collects and evens out the workshop wastewater.
    2. 02Protein sedimentation tankSettles out protein, which is pumped back to the factory for recovery.
    3. 03Pre-acidification tankA 400 m³ tank for hydrolysis and acidification ahead of the anaerobic reactor.
    4. 04IC anaerobic reactorA steel reactor 9 m in diameter by 20 m that turns organic matter into methane.
    5. 05Anaerobic sedimentation tankCatches sludge washed out of the reactor and returns it.
    6. 06First anoxic tankA 1200 m³ tank with 1.5 days residence; receives returned nitrified liquor, return sludge and some high-strength wastewater from the protein sedimentation tank as a carbon source.
    7. 07First aerobic tankA 2880 m³ aerated tank with 3.6 days residence; soda ash is added to replace alkalinity used in nitrification.
    8. 08Second anoxic tankA 760 m³ tank, also fed some high-strength wastewater from the protein sedimentation tank as a carbon source.
    9. 09Second aerobic tankA 1152 m³ aerated tank with soda ash dosing; nitrified liquor is pumped back to the first anoxic tank.
    10. 10Secondary settling tankSeparates the activated sludge, which is returned to the first anoxic tank.
    11. 11Modified Fenton reaction tankA 128 m³ tank dosed in turn with sulfuric acid, ferrous sulfate, hydrogen peroxide, caustic soda and PAM.
    12. 12Fenton sedimentation tankA 256 m³ tank for solid-liquid separation before discharge.

    What the source found

    The plant removed above 99% of COD and 99% of both ammonia and total nitrogen and met its design discharge standard steadily. Sending a small share of the high-strength wastewater past the anaerobic stage to the anoxic tanks gave enough carbon for nitrogen removal without an external carbon source. The Fenton stage removed most of the COD left after the biological stages and also took out phosphorus and suspended solids.

    Daily routine samples at each section by the plant laboratory, averaged over three months from April to June 2019.

    Water in, water out

    ParameterSymbolUnitInletOutletRemoval
    CODCODmg/L17,6403699.8%
    Ammonia nitrogenNH3-Nmg/L91.11.299%
    Total nitrogenTNmg/L1,26611.699.1%

    Inlet: wastewater entering the protein sedimentation tank. Outlet: effluent of the Fenton sedimentation tank. Averages of daily routine samples from April to June 2019. Values and units are as the published source prints them. Removal is worked out from the two values, or is the source's own figure where it prints no pair.

    Similar references