Removing hardness and sulfate from brackish-water RO brine by nanofiltration before more RO
Brine was collected from a small brackish groundwater reverse osmosis plant of 100 m³ per day in Matrouh governorate, Egypt, which concentrates magnesium and sulfate salts in its reject. Brine from inland plants is mostly sent to deep aquifers, so the test asked whether nanofiltration can strip the scaling salts and let the brine go to an additional RO stage.
Treatment line
- 01Laboratory nanofiltration test unitOne spiral-wound nanofiltration element of 0.56 m² run at 7 bar, with permeate and reject returned to the feed tank to hold the feed constant.
What the source found
Nanofiltration removed 80% of dissolved solids, 90% of total hardness, 98% of sulfate and 76% of chloride from the brackish-water brine. The permeate no longer tended to form calcium carbonate scale, which makes it a better feed for a further RO stage.
Laboratory runs of 8 hours at 25 °C on the collected brine, with the feed, permeate and reject analysed for major ions, after tests with single-salt solutions.
Water in, water out
| Parameter | Symbol | Unit | Inlet | Outlet | Removal |
|---|---|---|---|---|---|
| pH | 8 | ||||
| Total dissolved solids | TDS | mg/L | 15,115.9 | 3,009.8 | 80% |
| Calcium | Ca | mg/L | 320 | 82% | |
| Magnesium | Mg | mg/L | 583.2 | 93% | |
| Sodium | Na | mg/L | 4,600 | 77% | |
| Potassium | K | mg/L | 110 | ||
| Carbonate | CO32− | mg/L | 18 | ||
| Bicarbonate | HCO3− | mg/L | 311.1 | 89% | |
| Sulfate | SO42− | mg/L | 1,837 | 98% | |
| Chloride | Cl− | mg/L | 7,492.2 | 76% | |
| Calcium hardness | mg/L | 800 | |||
| Magnesium hardness | mg/L | 2,400 | |||
| Total hardness | TH | mg/L | 3,191.1 | 304.9 | 90% |
| Sulfate to bicarbonate molar ratio | 3.75 | 0.75 | |||
| Langelier saturation index | 0.75 | -0.34 |
Inlet: reverse osmosis brine fed to the nanofiltration unit. Outlet: nanofiltration permeate. One set of laboratory runs of 8 hours at 7 bar on the collected brine. Values and units are as the published source prints them. Removal is worked out from the two values, or is the source's own figure where it prints no pair.