Aguato

    Nitrogen and phosphorus removal from turtle farm pond water by biofilm and floating-bed ponds

    A soft-shelled turtle farm of about 400,000 m² in Huizhou has 46 culture ponds covering about 360,000 m². In 2014 abandoned drainage ditches and ponds were rebuilt into a three-stage purification system, and the treated water is stored and reused in the culture ponds instead of being discharged.

    Treatment line

    1. 01Artificial substrate filtering pondAbout 3,333 m² pond hung with sheets of non-woven polypropylene fabric on which biofilm grows.
    2. 02Floating bed filtering pondAbout 20,000 m² pond with floating beds planted with water spinach over part of its surface.
    3. 03Brush filtering pondAbout 13,333 m² pond hung with eight polyethylene biological brushes per square metre.
    4. 04Storage pondAbout 17,333 m² pond that holds the treated water for reuse in the culture ponds.

    What the source found

    From culture ponds to storage pond the system removed on average about 85% of COD and 89% of total phosphorus, and between 67% and 87% of total nitrogen. The water stayed aerobic throughout, and the biofilms on the substrates, plant roots and brushes held more active bacteria than the water, including denitrifying and phosphorus-removing groups. The system kept nutrient levels low without discharging wastewater during the culture season.

    Water from the culture ponds, the outlet of each purification pond and the storage pond was sampled every 20 days from May to August 2014, at peak production, and biofilm and water bacteria were analysed by DNA sequencing and carbon-source tests.

    Water in, water out

    ParameterSymbolUnitInletOutletRemoval
    CODCODmg/L44.87.184%
    Total phosphorusTP89%
    Ammonium nitrogenNH4-N74%
    Nitrite nitrogenNO2-N75%
    Nitrate nitrogenNO3-N63%

    Inlet: water from the culture ponds. Outlet: water in the storage pond after the purification ponds. Seven samplings every 20 days from May to August 2014; values are the means printed in the text. Values and units are as the published source prints them. Removal is worked out from the two values, or is the source's own figure where it prints no pair.

    Similar references