Wastewater Treatment Plants

AQANA BV provides their customers and partners all over the world, with the next generation high-rate anaerobic wastewater treatment technology. Based on the immobilized anaerobic biomass inside a floating carrier the DACS technology – or anaerobic MBBR – can treat most types of industrial effluents in a very cost-effective way.

AWT specializes in the design, construction and installation of complete waste water treatment plants for a wide range of industry sectors, from beverage and food to sewage and waste water. Whether your solution calls for a conventional treatment process or is to involve a more modern Membrane Bio Reactor (MBR) type system.

APL Construction was incorporated in February 2011 by Aidan Langan. The company headquarters are in South Lanarkshire, Scotland. APL Construction currently employs about 40 members of staff. The company turnover for 2023 was just over £5m. APL work mainly on Scottish Water projects however we have also carried out works on Severn Trent and Northumbrian Water projects. APL are capable in both water and wastewater sectors and carry out all the aspects of civil engineering required in these fields. The company continues to grow year on year and invests heavily each year on staff training, premises, fleet, plant, and equipment. The company currently has over £1m worth of owned plant at its disposal. Capabilities include: Cofferdams Deep drainage Concrete structures Groundworks Rising mains Butt fusion Pressure testing Ductile installations Ducting Cable laying Roadways Hard landscaping Additional information can be found on our website.

Based in Clevedon, near Bristol, North Somerset, AUMA Actuators Limited is the UK subsidiary of the global AUMA Reister GmbH and Co., the world’s largest manufacturer of electric valve actuators, operating on every continent, with 2,300 employees in 30 locations. AUMA Actuators Limited is the UK arm of global manufacturer AUMA Reister GmbH, manufacturing daily over 500 electric actuators for valves, penstocks and dampers. A trusted supplier to the UK water and wastewater industry, AUMA holds supply and maintenance frameworks with all major UK water companies. With a UK-based team of experts and a £2.5 million inventory held locally, AUMA ensures rapid response and fast-track call-off for urgent project requirements. AUMA provides electric actuators – including variable speed, explosion-proof and underwater variants – plus gearboxes for flow control across water and wastewater networks, backed by comprehensive service, maintenance, and support tailored to the specific needs of the UK water sector. Key Products • SQ and SA part and multi-turn actuators for Class A and B operation, torques from 10 Nm to 32,000 Nm extendable to 675,000 Nm with optional gearboxes. • SQR and SAR modulating actuators provide Class C control up to 1500 starts/hr. Torques from 15 Nm to 2,400 Nm depending on model chosen. • SQV and SAV variable speed actuators provide accurate close control of valve position and flow rate, with soft-open and soft-close ability that protect ageing assets while retaining speed of operation and emergency functions. Tripping torques from 10 Nm to 1000 Nm. Modulating versions SQRV and SARV are also available • Profox – compact actuators for part- and multi-turn applications – easy to set up, reliable and tough, for torque ranges up to 600 Nm (part turn) and 100 Nm (multi-turn) For explosive atmospheres, AUMA actuators are available with full ATEX certification. Please ask us for details. AUMA equipment is built for the digital world. Full Fieldbus integration, the ability to integrate and consolidate other plant signals and bidirectional control makes AUMA an ideal project partner, while the modular approach and versatile configuration of AUMA equipment makes it ideal when you are considering automation of existing assets.

BioBox-E BV specializes in the development and realization of anaerobic digestion plants, along with advanced pre-treatment techniques for preparing organic substrates. This includes innovative methods for separation and size reduction to optimize materials for digestion.

Filter nozzles, spray nozzles, resin traps and filter floors Since 1985 Cadar has firmly established itself within the municipal and industrial water treatment markets as well as the food, pharmaceuticals and chemical industries where liquids that require processing through either media filters such as sand, ion-exchange resins and carbons. As a well known designer and supplier of filter nozzles and distribution systems, Cadar has used this platform to develop new products and systems. These include the highly successful monolithic cast in place concrete filter floor and more diverse products such as resin traps, air scour systems, header and lateral under drains, and spray nozzles. Whichever the product, Cadar will continue to maintain its reputation for personal services both before and after sales.

Carlow Concrete is a market leader in water retaining precast concrete structures in both the United Kingdom and Ireland. Production at our state of the art plant in the South East of Ireland is carried out using the most modern and innovative methods and equipment, for the quality production of our products ensuring the highest standards of quality and specification compliance are achieved every time. As part of the Burren Precast Concrete Group, the company has the resources and infrastructure to meet the high demands of our customers in relation to quality of service and product. Our organisation benefits from a team with combined expertise of over 100 years in the precast industry. The company has the technical expertise, the flexibility in production methods and the resources to Interpret, Design, Manufacture and Assemble to the highest standards to meet the requirements of its customers, bringing modern methods of construction through the benefits of off-site construction, building information modelling (BIM) and highly experienced installation teams. Our expansive range of products are devised specifically for both water and wastewater projects and are unrivaled in terms of design, quality and ease of installation. Our solutions offer international, national and customer specification compliances and meet all water companies’ asset standards throughout the UK & Ireland. Site installations typically achieve 25% to 50% reduction in programme with fewer people and plant requirements, meaning substantial savings to both preliminary and direct costs. Stormwater attenuation. Flood alleviation. Service reservoirs. Precast filter bed wall and tile system. Activated sludge plant. Final/primary settlement tanks. Retaining walls.

Cotswold Valves forms part of the Flow Control Group. Covering a wide range of sectors including oil, gas, industrial, water, wastewater, sewage, chemical and power generation, the business provides consultancy services including product design, specification, selection, valve sizing, actuation, flow and pressure management, installation and the supply and retrofit of a full range of spares and replacement products. The Group’s Site Services division specialises in “On-Site” product support. We can undertake both new installations and carry out retrofit of valves and actuators to existing works. Where necessary we can act in a support capacity on client led installations The Flow Control Group incorporates fabrication and machining capabilities and can, in addition to the production of valves and penstocks, design and manufacture mounting kits, pedestals, drive bushes, spindles and other ancillary equipment. Our manufacturing facilities supply bespoke products in accordance with ISO 9001:2015 quality management systems. The business also operates to ISO 14001:2015 and ISO 45000:2018 standards operating to the highest Health & Safety and Environmental standards. Utilising our in-house actuation facility, we can assist with actuator selection, and can fit, set and test actuators prior to delivery. We can also fit actuators on site where necessary.

With over 35 years experience and knowledge of manufacturing variable speed electrical control systems, Drive Systems Ltd provide fixed and variable speed drives, control panels and will commission and install both the mechanical equipment and electrical supplies, as required. Drive Systems Limited is a wholly owned independent company founded in 1986 by its present directors to promote the use of packaged inverter drive systems into a wide range of industrial applications so that they could benefit from the flexibility of control and the large potential energy savings that this, then, emerging new technology could provide. Many areas of industry, from pet food manufacturers to woodworking machine makers and from the nuclear industry to the water companies became valued customers and benefited from bespoke packaged drive systems tailored to their specific application. The water companies soon became the source of the majority of the companies workload, with inverter based drive systems being developed for wet well submersible pump systems, rectangular bacteria bed distributors (both rope hauled and independently driven) and for circular filter bed distributor drives. This latter drive system, enjoying patent protection of its principles of operation, has been a huge success and over 2000 systems have been supplied into all of the UK`s Water Companies, as well as to numerous overseas locations. Drive Systems has recognised the need, not only to provide products and packaged control systems, but also to provide an installation and commissioning service which ensures optimised performance from the existing plant. Drive Systems site programme includes installation of both mechanical and electrical equipment on prepared foundations. The service is not complete without the inter connection of all items of equipment, including cables, cable trays and ducts, as required. Lighting, heating, ventilation are a natural extension of this work. Drive Systems can provide Fixed and variable speed drives for pumps and fans Control panels and cabinets designed for specific applications Percolating circular filter bed drives and control Percolating rectangular filter bed drives and control Complete installation both mechanical: cabling and electrical supplies Commissioning and test Servicing and repairs

ENKO specializes in the production and supply of plastic piping systems and fittings. ENKO serves water treatment plants, swimming pools, the chemical industry, and the agricultural sector.

Evers + Manders Groep specializes in the design, construction, and maintenance of water and sludge treatment plants. Evers + Manders provides turnkey solutions for water authorities and industry.

Evides Industriewater is an expert in the production, supply, and purification of industrial water. Evides supplies process water, demineralized water, and reclaimed water, and provides wastewater treatment for industrial clients.

The Fluid Group are specialists in CFD (computational fluid dynamics) for Water, Wastewater, Chemical and Environmental Engineering. Founded in 2005, we provide state-of-the art, 3D flow modelling from first principles. In the water sector, CFD modelling is used to optimise the design and operation of mixing tanks, contact tanks, reservoirs, pumping stations, flow splits, filter distribution systems, dissolved air flotation tanks, clarifiers, digesters, inlet works and outfalls… all aspects of water and wastewater treatment, storage and distribution. From single phase to multiphase simulation with water/air and solids, 3D flow modelling can confirm whether a new engineering design will meet the design objectives, or assist with understanding why an existing plant is failing to perform as expected.

With sixteen divisions and twelve manufacturing plants, FP McCann is the UK’s largest precast concrete manufacture. They provide an extensive range of precast concrete solutions, including drainage, tanks, tunnels and shafts, rail, power and infrastructure, filter bed systems, walling, fencing, agricultural, architectural and structural building solutions, flooring, dock leveller pits and specialist precast products. McCann will customise their solutions to ensure they create maximum value for your project, accommodating your site conditions, design requirements and construction needs. The quality and reliability of McCann’s products and services are the foundation of their success. They are constantly developing and improving their solutions, whilst striving to exceed their customers’ expectations. McCann’s extensive range of precast drainage products include pipes, wide wall/manhole chambers/soakways, cover slabs, gullies, headwalls, box culverts, fall arrest systems, house inspection chambers, catchpits, flow control and valve chambers, hydrodynamic separators, rain harvesting systems etc. They also provide bespoke multipurpose tank chambers and panel systems. The geographical spread of their twelve modern precast manufacturing plants, coupled with their ability to deliver to their clients’ specifications on major projects across the UK and Ireland, has established McCann as a valuable and reliable partner. At McCann, they promise to build strong, sustainable relationships with their stakeholders. By implementing their corporate values, they aim to deliver on this guarantee through their products, services, communications and, above all, the behaviour of their people. They recognise the importance of operating with integrity and apply high standards of corporate governance in the conduct of their business.

Fytagoras is a plant science research company that investigates the interaction between plants and their environment. Fytagoras develops innovative solutions for water management, plant health, and sustainable agriculture.

Gurney Environmental is a well established provider of systems and technologies used in the treatment of water and wastewater. From water supply to water re-use, we have designed and developed innovative, low cost and sustainable systems for the water and wastewater industries. Low CAPEX plus low OPEX equals low TOTEX. True sustainability is the benchmark for success with Gurney. We offer unique water and wastewater treatment systems, equipment and design including zero-to-low energy www and reservoir destratification systems. Our experience and knowledge of the water and wastewater treatment industries has successfully helped a wide variety of clients including major landowners (such as the Crown Estate) and many of the UK’s water utility companies. Our systems are today recognised internationally with a growing number of foreign municipals. Gurney has a total commitment to quality. Our systems and solutions represent the finest in long-term value, which is why we place such a strong emphasis on equipment with sturdy construction and fewer moving parts. Our commitment to a low total life cost is a key part of a commitment to quality.

Hach is a global leader in water analysis meters and instruments. Hach provides water quality testing, process monitoring, and laboratory analysis solutions for drinking water, wastewater, and industrial applications.

Suppliers of FujiClean Sewage Treatment Systems & Manufacturers of Inlet Screeners Haigh Environmental is part of the Haigh Group Ltd, an established provider of specialist water and waste services in the UK, employing around 120 people. Providing next-generation water treatment solutions that protect our waterways for future generations is at the heart of our business. Driven by impact, not profit, we pride ourselves on our open-minded, transparent approach, taking a long-term view on the right solutions for our clients and local communities. We supply a range of screens and package water treatment plants, including the pioneering FujiClean system – with excellent results across all relevant metrics. Simplicity is at the heart of our value proposition. As a response to increased environmental permit requirements, complex solutions have emerged across the water industry in a piecemeal fashion, often leading to non-standardised, expensive and over-engineered systems. Working together with utility companies, contractors and communities, we are leveraging the expertise of our experienced team to offer practical, cost-effective and standardised alternatives to septic tanks and conventional chemical dosing treatment options.

Hydro International, a CRH company,  provides advanced products, services and expertise to help municipal, industrial and construction customers to improve their water management processes, increase operational performance and reduce environmental impact. Hydro International can help water companies meet their AMP and environmental obligations, including the reduction of sewer overflows and the Water Industry National Environment Programme (WINEP). Hydro International provides total solutions for Inlet Works, Combined Sewer Overflows (CSOs), Stormwater Management, Flood Warning and Prevention, and Water Resource management, from design to supply and installation through to ongoing preventative maintenance, servicing and emergency repair.  These solutions include: Hydrometric data collection, monitoring analysis and reporting for river level, reservoir, network and weather. Continuous water quality monitoring for compliance with Section 82 of the Environment Act. Water resource analysis and consultancy. Stormwater management solutions, including options for Sustainable Drainage Systems. (SuDS) and Smart Maintenance. CSO event duration monitoring. CSO and storm tank treatment and screening. Passive flow controls for flood prevention schemes, SuDS, CSOs and WwTWs. Inlet works screening and grit removal solutions. Sludge screening. Dropping sewage or water safely from height. Hire, repair and maintenance of inlet works screens and screenings handling equipment

Lloyd Morris Electrical Limited is a company of electrical engineers, specialising in the design, manufacture and installation of electrical distribution and control systems for industrial and commercial applications. Having established the company in 1974, it has since developed in to a well-recognised and reputable organisation within the industry and is keen to develop professional and pro-active relationships with its clients. LME offers Design for Manufacture and Assembly (DfMA) across the complete electrical service supply. The off-site manufacture of pre-assembled and cabled low voltage switch/plant rooms offers significant benefits in relation to safety, quality, cost and program. Control panels LME pride ourselves in being at the forefront of control panel manufacturing. LME have an unrivalled level of expertise and service, and we make sure that all our control panels are designed and built to match your exact requirements. LME provide control panels constructed from Form 1 through to Form 4. With our control panels we consider the space available and all special site requirements. We can supply off the shelf or bespoke steelwork so that each order can be custom built to specific requirements and comply with your general and exact specifications. Intelligent design motor control centres minimise the number of components required as various functions are integrated into single intelligent devices. LME offer intelligent motor control centres manufactured to the same construction range as our conventional units which are all bespoke and are BS EN61439-1&2 compliant. LV switchboards LME manufacture bespoke LV switchboards, each assembly can be custom built to specific requirements and comply with client’s exact specifications providing LV switchboards constructed from Form 1 through to Form 4, Type 1 to Type 7. With our LV switchboards, we can accommodate various types of cable entries whether top, bottom or a mixture of both, front or rear access, or we can even manufacture a hybrid solution using a combination of any form and type. Electrical design An important aspect in the development of any project is the design and provision of professionally presented documentation. Therefore, to meet the varying needs of each client, our team of draughtsman are well equipped with the latest AutoCAD systems. Our project engineers use software tools to perform cable and lighting calculations, cable and instrumentation scheduling, rating of protection devices, and overall contract programming and scheduling. Electrical installations LME have the resource, capability, and experience to provide a complete electrical installation, for any water plant or factory. With a large, fully qualified, and competent workforce combined with an extensive fleet of vehicles, no task is too large and no location too remote. With this structure and experience, we can offer a comprehensive range of installation services covering locations throughout the United Kingdom. Systems integration To provide a fully integrated approach to projects, the company has the facility to develop complex and highly structured software. Our systems engineers have considerable experience in all aspects of software design and development, ranging from basic PLC systems and HMI/SCADA, controlling process and manufacturing plant, through to commercial and industrial databases and high-level management information systems (MIS), producing essential business information.