Resource recovery facilities turning wastewater into water, nutrients, energy, and other reusable materials.

    Find a Water Resource Recovery Provider

    Matched providers: 16

    Top countries: Netherlands, United States

    Popular technologies: Acid Dosing Systems, Alkali Dosing Systems

    Water Resource Recovery Facilities: Advanced STW Operations Delivering Circular Economy Outcomes

    Water resource recovery facilities (WRRFs) is the modern terminology for sewage treatment works (STWs) that have been redesigned or reconceptualised to maximise recovery of energy, nutrients, and materials from wastewater rather than simply treating it for disposal. The concept positions wastewater as a resource-rich feedstock rather than a waste, aligning with circular economy principles embedded in UK government policy (Resources and Waste Strategy 2018; Critical Minerals Strategy 2023; Net Zero Strategy 2021).

    WRRF resource streams: energy: biogas from anaerobic digestion (AD) of sludge (30 to 65 percent of STW electricity demand from on-site generation for energy-efficient large works; target 100 percent electrical self-sufficiency at large UK STWs by 2030 per Water UK Net Zero Routemap); nutrients: struvite (MgNH4PO4.6H2O, slow-release fertiliser, NPK 5-28-0; 60 to 85 percent P recovery from reject water); ammonium sulphate (from ammonia stripping of centrate; nitrogen fertiliser); cellulose from primary screenings (soil improver or biofuel feedstock); water: treated effluent reused for irrigation or non-potable industrial uses (Class A reuse under ISO 16075-2: E. coli less than 10 CFU/100 mL, BOD5 less than 10 mg/L, TSS less than 10 mg/L); heat: large heat pumps recovering low-grade heat (10 to 20 degrees C) from final effluent for district heating. IWA (International Water Association) endorses WRRF as the operational paradigm for 21st-century municipal wastewater infrastructure, reflected in the IWA Resource Recovery Cluster and IWA Cities of the Future programme.

    Technology integration at WRRFs: thermal hydrolysis pre-treatment (THP): proprietary THP processes (pressure cooking of sludge at 165 to 180 degrees C, 6 bar, 30 minutes; cell lysis releases intracellular material making it more biodegradable; VS destruction in AD increases from 45 to 55 percent to 55 to 65 percent; biogas yield increase 20 to 30 percent; dewatered cake DS increases from 25 to 30 percent (without THP) to 35 to 45 percent (with THP), reducing transport and disposal costs); installed at Anglian Water Cliff Quay STW, Thames Water Beckton STW, Yorkshire Water Esholt STW. Anaerobic membrane bioreactor (AnMBR): combines AD with membrane filtration (hollow fibre UF membrane submerged in anaerobic reactor); treats dilute wastewater anaerobically (conventionally anaerobic treatment requires high-strength effluent or high-temperature feed); AnMBR at ambient temperature (20 to 25 degrees C) generates biogas from municipal wastewater; energy positive treatment concept (net energy output after membrane aeration energy input); pilot installations at Cranfield University and commercial scale at Leeuwarden (Netherlands). Nutrient recovery integration: fluidised-bed struvite crystalliser installed in centrate return line after centrifuge; struvite pellets removed from crystalliser and dried; reduces orthophosphate in centrate return (which otherwise contributes 20 to 40 percent of total P load to STW inlet from internal recycles); reduces total P at STW inlet by 10 to 20 percent; reduces chemical P precipitation costs.

    Regulatory and financial drivers for WRRFs: EA WINEP (Water Industry National Environment Programme) P limits (0.1 to 0.25 mg/L TP at large STWs in sensitive areas) simultaneously require improved P removal and incentivise P recovery (struvite recovery as compliance solution); Water UK Net Zero 2030 target: all water sector greenhouse gas emissions at net zero by 2030 (Scope 1 and 2) and by 2030 for Scope 3; energy recovery from biogas is the primary lever for electricity emissions reduction (Water UK benchmark: 2.5 to 3.5 kg CO2e/tonne treated for energy-efficient large STWs). UKWIR Carbon Accounting for the Water Industry (UKWIR 22/CL/01/5): standardised carbon accounting methodology for sludge digestion and energy from biogas; Scope 1 emissions from biogas combustion classified as biogenic (zero carbon in CO2e accounting per IPCC guidelines); sludge biosolids land application releases N2O (global warming potential 298 x CO2; 1 to 2 percent of applied N converts to N2O); N2O from biological nitrification-denitrification in aeration tanks: 0.005 to 0.05 percent of influent TN as N2O off-gas. Commercial revenue: struvite product (branded recovered struvite fertiliser, UK price approximately GBP 250 to 400 per tonne); biosolids to agricultural spreading (avoided landfill cost GBP 100 to 150/tonne DS; agricultural spreading cost GBP 30 to 80/tonne DS; value of nutrients approximately GBP 20 to 40/tonne DS as fertiliser equivalent); RGGO (Renewable Gas Guarantee of Origin) certificates for biomethane injection to grid at approximately GBP 30 to 60/MWh.

    Frequently Asked Questions

    What is a water resource recovery facility and how is it different from a sewage treatment works?

    A water resource recovery facility (WRRF) and a sewage treatment works (STW) perform the same core function - treating wastewater before it is discharged to the environment - but differ in their operational philosophy and outputs. Traditional STW: the primary objective is to remove pollutants (BOD, SS, ammonia, phosphorus) to a level that complies with the Environmental Permit discharge consent; by-products (sludge, biogas) are managed primarily as wastes; treatment processes are selected for compliance, not resource extraction. WRRF: reconceptualises wastewater as a carrier of resources (energy, nutrients, water, materials) that should be extracted and recovered; operational objective is zero waste - every output stream is a product; treatment processes are selected for resource recovery as well as compliance. Practical differences: a WRRF will typically: (1) Install anaerobic digestion with thermal hydrolysis pre-treatment to maximise biogas yield and generate electricity from biogas CHP; (2) Recover struvite from centrate reject water and market it as slow-release fertiliser rather than returning all P to the inlet; (3) Treat tertiary effluent for non-potable water reuse rather than discharging all flow to the receiving watercourse; (4) Install heat pumps to recover low-grade thermal energy from final effluent for district heating rather than wasting the heat in the discharge; (5) Recover cellulose from primary screenings rather than sending all screenings to landfill. The term WRRF was introduced by the Water Environment Federation (WEF) in 2013 and endorsed by IWA to reflect this broader operational concept; in the UK, all major STWs operated by water companies are moving towards WRRF principles under Net Zero and circular economy obligations.

    How much energy can be recovered from wastewater treatment?

    Energy recovery potential from wastewater: theoretical maximum: wastewater contains approximately 3 to 10 kWh of chemical energy per m3 (as organic matter); current state of the art recovers 0.3 to 1.0 kWh/m3 as electrical energy; a typical large STW (greater than 100,000 PE) treating municipal wastewater currently uses 0.3 to 0.6 kWh/m3 in total (aeration is typically 50 to 60 percent of site energy use; pumping 15 to 25 percent; other 15 to 30 percent); if all biogas energy is recovered, energy self-sufficiency ratio: large UK STWs with THP/AD currently achieve 50 to 80 percent electrical self-sufficiency from biogas CHP; theoretical maximum with optimised digestion approximately 100 to 130 percent (energy positive at site boundary). Key technologies: (1) Anaerobic digestion (AD) + CHP: most important recovery route; biogas yield from sewage sludge (at 55 to 65 percent VS destruction with THP): 0.3 to 0.5 Nm3 CH4/kg VS destroyed; calorific value CH4 35.8 MJ/Nm3; CHP electrical efficiency 35 to 42 percent; heat recovery 40 to 45 percent; example: large STW 200,000 PE; sludge production approximately 9,000 tonnes DS/year; biogas generation approximately 7 million Nm3 CH4/year; CHP electricity generation approximately 8 to 10 GWh/year; equivalent to approximately 70 to 80 percent of site electrical demand; (2) Biomethane grid injection: alternative to CHP; upgraded biogas (greater than 97 percent CH4) injected to gas distribution grid under GS(M)R; revenue from RGGO certificates GBP 30 to 60/MWh; (3) Heat pumps: final effluent at 10 to 20 degrees C; large screw or centrifugal heat pump (3 to 5 MW); COP 3 to 5; useful heat output 40 to 45 degrees C; used for district heating (Whitchurch STW, Bristol Water); (4) Micro-hydro: inline turbines at works with available head (greater than 10 m); 5 to 50 kW generation.

    What nutrient recovery technologies are being deployed at UK STWs?

    Nutrient recovery technologies deployed or in active trial at UK sewage treatment works: (1) Struvite crystallisation: most commercially mature technology; fluidised bed crystalliser reactor installed in centrate return line from sludge dewatering centrifuges; centrate feed: NH4-N typically 500 to 1,500 mg/L, PO4-P 50 to 300 mg/L; MgCl2 dosed (Mg:P molar ratio 1.2 to 1.5) at pH 7.5 to 8.2; struvite crystals (MgNH4PO4.6H2O) grow on seed material and harvested at 1 to 5 mm diameter; product marketed as a branded slow-release fertiliser (NPK 5-28-0 plus 10 percent Mg) or equivalent; UK installations: Slough STW (Thames Water), Davyhulme STW (United Utilities), Avonmouth STW (Wessex Water), Southam STW (Severn Trent); P recovery 60 to 85 percent of centrate P; annual struvite production UK sector: approximately 2,000 to 4,000 tonnes per year (growing with WINEP P obligations). (2) Ammonium stripping: steam or air stripping of ammonia from centrate (or digested sludge liquors) at elevated temperature (80 to 90 degrees C) and pH (10.5 to 12.0); ammonia transferred to gas phase; absorbed into H2SO4 to produce ammonium sulphate solution (21 percent N) or ammonium nitrate; product used as nitrogen fertiliser; UK trials at Minworth STW (Severn Trent Water); full-scale commercial in Netherlands and Germany; applicable where centrate NH4-N exceeds 500 mg/L. (3) Ion exchange for ammonia: zeolite clinoptilolite (NH4+ selective ion exchange; regenerated with NaCl or NaNO3 brine; concentrated eluate undergoes stripping or struvite precipitation); lower operating cost than steam stripping; UK research scale. (4) Cellulose recovery from primary screenings: mechanical screening (0.5 mm fine screen) captures cellulose fibres from primary sewage; dewatered and dried; used as biofuel or soil conditioner; UK installations: Anglian Water, Wessex Water; approximately 1,000 to 3,000 tonnes dry cellulose per year per large STW.

    What are the regulations for biosolids use in agriculture from UK STWs?

    Biosolids (dewatered digested sludge from sewage treatment works) applied to agricultural land in the UK are regulated under: (1) Sludge Use in Agriculture Regulations 1989 (SI 1989/1263, as amended), implementing EU Sewage Sludge Directive 86/278/EEC (UK retained); regulations set maximum metal concentrations in soil receiving biosolids: Zn less than 200 to 300 mg/kg (depends on soil pH); Cu less than 80 to 100 mg/kg; Ni less than 50 to 75 mg/kg; Cd less than 3 mg/kg; Pb less than 300 mg/kg; Hg less than 1 mg/kg; Cr less than 400 mg/kg; also set maximum application rates (250 kg total N/ha/year for untreated sludge; 250 kg/ha/year for treated sludge); requirements for soil and sludge testing before application (soil pH greater than 5.0; soil metal analysis); minimum soil pH maintained above 5.0 during and after application. (2) Safe Sludge Matrix (SSM): voluntary agreement between Water UK (formerly Water Services Association), ADAS, and the major food industry bodies (LEAF, Fresh Produce Consortium); SSM specifies: no untreated (raw) sludge on any agricultural land for food production; treated sludge (conventional pasteurisation at 70 degrees C for 30 minutes, or thermophilic digestion) restricted on certain food crops (salad crops, soft fruit); enhanced treated sludge (advanced digestion at greater than 55 degrees C plus pH greater than 12, or THP + AD) may be applied with shorter harvest intervals; compliance with SSM is required by supermarket supply chain standards (Red Tractor, LEAF Marque). (3) EA Environmental Permit or exemption: spreading biosolids under Sludge Regulations uses a registered exemption (U9 exemption for spreading treated sludge; limits 10 tonne DS/ha per application; soil and sludge records to EA). (4) Nitrates Regulations: in Nitrate Vulnerable Zones (NVZs), total N from all organic manures (including biosolids) limited to 250 kg N/ha/year; closed periods for spreading (1 September to 31 January on sandy or shallow soils).

    Aguato
    • Find projects
    • References
    Home/Directory/Reuse, Recovery & Stormwater

    Water Resource Recovery Companies

    Resource recovery facilities turning wastewater into water, nutrients, energy, and other reusable materials.

    10 specialist providers · 6 related · 10 countries

    Post a project

    Filters

    Country

    Netherlands4
    United States4
    Australia1
    Canada1
    China1

    Industry

    food-beverage5
    manufacturing5
    agriculture4
    waste-management4
    chemicals-pharmaceuticals3

    Technology

    Acid Dosing Systems2
    Alkali Dosing Systems2
    Aluminum Salt Precipitation Units2
    Automated pH Control Systems2
    Calcium Phosphate Precipitation Reactors2

    Showing 1 to 16 of 16

    Specialists in water resource recovery

    Providers whose services or self-declared specialties match this category.

    Clean TeQ Water

    Australia

    Clean TeQ Water, headquartered in Mount Waverley, Victoria, Australia, develops and delivers advanced water treatment and resource recovery technologies. Its portfolio includes CIF continuous ionic filtration, CLEAN-IX metal recovery, DESALX membrane-free desalination, EVAPX low-energy evaporation, and PHOSPHIX phosphorus recovery, applied to zero and minimum liquid discharge, brackish desalination, and metals recovery via EPC and build-own-operate models.

    • CIF continuous ionic filtration
    • CLEAN-IX metal recovery
    • DESALX membrane-free desalination

    Metro Water Recovery

    United States

    Metro Water Recovery is the largest wastewater treatment provider in the Rocky Mountain West, headquartered at 6450 York Street in Denver, Colorado. The public agency serves over 2 million people across 65 member cities and sanitation districts within an 817-square-mile region spanning Denver and portions of Adams, Arapahoe, Jefferson, Douglas, and Weld counties. Its mission is to protect regional health and the environment by cleaning water and recovering resources. Metro Water Recovery operates three facilities, the Robert W. Hite Treatment Facility, the Northern Treatment Plant, and the METROGRO Farm, providing wastewater transmission and treatment, biosolids processing, thermal energy recovery, and industrial pretreatment.

    • Biological wastewater treatment
    • Biosolids dewatering and land application
    • Thermal energy recovery from wastewater pipelines

    ByoSis

    Netherlands · 51-200 employees

    ByoSis is a producer of biological and physicochemical wastewater treatment plants. These industrial treatment plants are designed, manufactured, supplied, and maintained by ByoSis. Our clients are companies with wastewater streams that are too contaminated for discharge.

    • Filtration
    • Screening
    • Ion Exchange

    Ostara

    Canada

    Ostara, founded in 2005 and headquartered in Vancouver, Canada, recovers nutrients from municipal and industrial wastewater and converts them into commercial fertilizer. Its proprietary Pearl fluidized-bed reactor crystallizes phosphorus and nitrogen into struvite-based Crystal Green slow-release fertilizer, helping water resource recovery facilities meet discharge limits, prevent struvite scaling, and generate revenue from recovered nutrients across North America and Europe.

    • Pearl nutrient recovery process
    • Fluidized-bed struvite reactor
    • Crystal Green slow-release fertilizer

    Jacobs

    United States

    Jacobs is a global professional services company headquartered in Dallas, Texas, United States, delivering science based, digitally enabled, end to end solutions from consulting and advisory through design and implementation. The company operates in roughly 40 countries with around 47,000 employees and approximately 12 billion dollars in annual revenue, serving infrastructure, advanced manufacturing, environmental, and technology sectors. In water, Jacobs provides comprehensive infrastructure services spanning water treatment, wastewater treatment, water reuse, water conveyance and storage, water resources management, and industrial water solutions. The firm applies AI enabled tools to plan, design, deliver, and operate complex water infrastructure, including digital twins, resource recovery, and advisory services for utilities and industrial clients worldwide.

    • AI enabled water infrastructure solutions
    • Digital twins
    • Flood IQ (AI flood risk management)

    Nijhuis Saur Industries

    Netherlands · 200+ employees

    Nijhuis Saur Industries specializes in sustainable water management solutions, offering advanced industrial water treatment and consultancy services across various sectors, including manufacturing and utilities. Their expertise includes cutting-edge filtration technologies and comprehensive treatment systems tailored to meet diverse industry needs.

    • Filtration
    • Screening
    • Ion Exchange
    CE

    Condorchem Enviro Solutions

    Spain

    Condorchem Enviro Solutions is a Catalan environmental engineering firm in Spain providing turnkey industrial wastewater and air emission treatment. Its portfolio spans ENVIDEST vacuum evaporators, DESALT crystallizers, reverse osmosis, ion exchange and activated carbon for zero liquid discharge, oily water treatment, textile and dye color removal, brine management and water reuse. The company holds ISO 9001, ISO 14001 and EcoVadis Gold, covering pollutant analysis, plant design, installation, start-up and after-sales maintenance.

    • ENVIDEST vacuum evaporators
    • DESALT crystallizers
    • Reverse osmosis

    Epic Cleantec

    United States

    Epic Cleantec is a San Francisco, California based water technology company specializing in decentralized, onsite water treatment and reuse systems for buildings. The company designs, engineers, permits, and installs water recycling solutions that recover three outputs from a building's wastewater: recycled water for non-potable use, recovered heat energy, and soil amendments. Its flagship OneWater and OneWater Rain systems serve residential and commercial developments, corporate campuses, hotels, data centers, stadiums, and breweries, claiming up to 95 percent reductions in water demand and utility fees. Epic Cleantec also provides operations and maintenance support along with project financing options.

    • OneWater onsite water reuse system
    • OneWater Rain rainwater and stormwater system
    • Wastewater heat recovery technology

    Cambi ASA

    Norway

    Cambi ASA, headquartered near Oslo, Norway, pioneered thermal hydrolysis for sewage sludge and organic waste, commissioning its first full-scale plant in 1996. The CambiTHP process pretreats sludge ahead of anaerobic digestion to boost biogas yield by up to 50 percent, triple digester throughput, and halve final biosolids volume, turning municipal and industrial waste streams into renewable energy and Class A biosolids worldwide.

    • CambiTHP thermal hydrolysis process
    • Advanced anaerobic digestion
    • Modular batch reactors

    BioSolum

    Netherlands

    BioSolum is a contract research organisation (CRO) within the biotechnology / microbiology / fermentation / waste water treatment area. Micro-organisms of interest: Archaea, Yeast, Bacteria, Fungi, Micro-algae. Fields of interest: Bio-based, Feed, Agriculture, Wastewater treatment, Enzymes.

    • Anaerobic Systems
    • Conventional Activated Sludge (CAS)

    Related providers

    Listed for overlapping capabilities, not for water resource recovery specifically.

    Jiangsu Vifluter Resource Recycling Technology Co.,LTD.

    Claimed

    China · 200+ employees · 5 references

    Founded in 2009, Vifluter is a global provider of low-temperature evaporation (LTE) solutions, helping industries reduce wastewater volume. Guided by our vision to "Become a world leader in resource recycling solutions,". Headquartered in China, we have established regional operating platforms and localized offices across the Middle East and Southeast Asia, ensuring rapid responses to our global clientele. Powered by a collaborative workforce of over 300 employees, Vifluter has served over 2,000 corporate clients. Our project operational stability ranks among the highest in the industry, earning widespread trust from global partners through proven product reliability and exceptional service. The Vifluter Vacuum Heat Pump Evaporator & Crystallizer is an advanced, energy-efficient solution engineered for industrial wastewater volume reduction, Zero Liquid Discharge (ZLD), and high-value resource recovery. Operating under deep vacuum conditions (-85 to -95 kPa), the system utilizes low-temperature heat pump technology (37–50°C) to process recalcitrant, high-salinity, and complex hazardous liquid streams (HazWaste) without requiring external steam. Equipped with continuous automated PLC controls, corrosion-resistant metallurgy, and specialized scraper/anti-scaling architectures, it transforms difficult industrial effluents into distilled clean water and reusable crystallized salts.

    • Low-Temperature Evaporation
    • Vacuum Evaporation
    • Heat Pump Evaporator

    Ecosystems International

    Claimed

    Indonesia · 51-200 employees

    PT Ecosystems International (PT ESI) was established at Jakarta on 21st November 2006. We are an industrial effluent treatment systems integrator specializing in electrocoagulation (EC), a unique waste water treatment profile. PT ESI has capabilities in designing complete waste water treatment solutions by combining various effluent treatment systems such as the electro-coagulation, biological, chemical processes and membrane filtration, offering its customers a wide and comprehensive range of solutions, tailored to suit their various needs – ranging from basic effluent treatment for discharge to effluent recycling for water reuse. The Company is experienced in handling the design, engineering, procurement, construction and operation of new Effluent Treatment Plants (“ETP”) and possesses expertise in retrofitting existing ETP to increase the flow rate and treatment capability without any major infrastructure increase PT ESI is also a premier waste water treatment service company specializing in handling waste water generated from Exploration (Drilling) and Produced Water. Customers in Indonesia include major Oil & Gas companies such as Pertamina, Exxon, Chevron, Petro-China and Medco. Operations in Indonesia are provided by both mobile and fixed units. At drill sites where waste-water recycling is required, PT ESI supplement these treatment units with skid mounted mobile Reverse Osmosis systems. The technologies and solutions employed by PT ESI are developed in-house and examples of these are its proprietary Trident™ Electro Contaminant Removal (“ECR”) system, the Stage Contaminant Removal (“SCR”) process and Mobile On-Site Waste-Water Treatment (“OWT”) units

    • Flat Sheet Microfiltration Units
    • Hollow Fiber MF Systems
    • Ceramic Microfiltration Modules

    Brine Consulting

    Claimed

    Netherlands · 1-50 employees

    BRINE CONSULTING delivers senior-level strategy, technical design, and actionable insight across the full lifecycle of water-related challenges. We support clients with advisory and due diligence, advanced brine management and resource recovery, industrial and municipal water reuse, and MLD/ZLD systems. Our team also leads ESG and climate-resilience strategy, innovation scouting, and international development and PPP advisory. With deep specialization in desalination, brine valorization, circular economy models, and high-impact infrastructure, we help organizations turn water and waste streams into opportunities, providing clear thinking, rapid delivery, and solutions built for real-world results.

    • Mechanical Vapor Recompression (MVR)
    • Atmospheric Evaporator
    • Spray Evaporator
    G

    Gradiant

    United States

    Gradiant is an industrial water treatment solutions and technology company headquartered in Woburn, Massachusetts, United States, founded at MIT in 2013 with over 1,300 employees worldwide. The company provides complete, site-wide solutions that combine proprietary technology, engineering, and customized chemicals to help industries reduce freshwater use, reclaim valuable resources, and renew wastewater into freshwater. Gradiant specializes in minimum and zero liquid discharge, ultrapure water, PFAS and emerging-contaminant removal, and resource recovery for sectors including semiconductors, pharmaceuticals, food and beverage, and lithium and critical minerals.

    • ForeverGone PFAS removal
    • RO Infinity
    • Bio Infinity biological treatment

    Toray Membrane Europe AG

    Switzerland · 200+ employees

    Toray Membrane Europe AG is a leading manufacturer of advanced membrane technologies, including RO, NF, UF, and MBR systems. These innovations are pivotal in producing clean water and enabling resource recovery across various industries, supporting sustainable water treatment solutions globally.

    • Reverse Osmosis (RO)
    • Nanofiltration (NF)
    • Microfiltration (MF)

    GEA

    Germany

    GEA is a German global systems supplier providing advanced separation and environmental technologies for water treatment and wastewater management. The company offers resource-efficient solutions enabling wastewater reuse and resource recovery, supporting sustainability across diverse industries with 18,000+ employees.

    • Centrifuge technology for wastewater
    • Advanced separation equipment
    • Resource recovery systems

    Buyer's guide

    The buyer's guide to water resource recovery

    OverviewFAQScenarioQuestions to askCost driversRegulations

    Water Resource Recovery Facilities: Advanced STW Operations Delivering Circular Economy Outcomes

    Water resource recovery facilities (WRRFs) is the modern terminology for sewage treatment works (STWs) that have been redesigned or reconceptualised to maximise recovery of energy, nutrients, and materials from wastewater rather than simply treating it for disposal. The concept positions wastewater as a resource-rich feedstock rather than a waste, aligning with circular economy principles embedded in UK government policy (Resources and Waste Strategy 2018; Critical Minerals Strategy 2023; Net Zero Strategy 2021).

    WRRF resource streams: energy: biogas from anaerobic digestion (AD) of sludge (30 to 65 percent of STW electricity demand from on-site generation for energy-efficient large works; target 100 percent electrical self-sufficiency at large UK STWs by 2030 per Water UK Net Zero Routemap); nutrients: struvite (MgNH4PO4.6H2O, slow-release fertiliser, NPK 5-28-0; 60 to 85 percent P recovery from reject water); ammonium sulphate (from ammonia stripping of centrate; nitrogen fertiliser); cellulose from primary screenings (soil improver or biofuel feedstock); water: treated effluent reused for irrigation or non-potable industrial uses (Class A reuse under ISO 16075-2: E. coli less than 10 CFU/100 mL, BOD5 less than 10 mg/L, TSS less than 10 mg/L); heat: large heat pumps recovering low-grade heat (10 to 20 degrees C) from final effluent for district heating. IWA (International Water Association) endorses WRRF as the operational paradigm for 21st-century municipal wastewater infrastructure, reflected in the IWA Resource Recovery Cluster and IWA Cities of the Future programme.

    Technology integration at WRRFs: thermal hydrolysis pre-treatment (THP): proprietary THP processes (pressure cooking of sludge at 165 to 180 degrees C, 6 bar, 30 minutes; cell lysis releases intracellular material making it more biodegradable; VS destruction in AD increases from 45 to 55 percent to 55 to 65 percent; biogas yield increase 20 to 30 percent; dewatered cake DS increases from 25 to 30 percent (without THP) to 35 to 45 percent (with THP), reducing transport and disposal costs); installed at Anglian Water Cliff Quay STW, Thames Water Beckton STW, Yorkshire Water Esholt STW. Anaerobic membrane bioreactor (AnMBR): combines AD with membrane filtration (hollow fibre UF membrane submerged in anaerobic reactor); treats dilute wastewater anaerobically (conventionally anaerobic treatment requires high-strength effluent or high-temperature feed); AnMBR at ambient temperature (20 to 25 degrees C) generates biogas from municipal wastewater; energy positive treatment concept (net energy output after membrane aeration energy input); pilot installations at Cranfield University and commercial scale at Leeuwarden (Netherlands). Nutrient recovery integration: fluidised-bed struvite crystalliser installed in centrate return line after centrifuge; struvite pellets removed from crystalliser and dried; reduces orthophosphate in centrate return (which otherwise contributes 20 to 40 percent of total P load to STW inlet from internal recycles); reduces total P at STW inlet by 10 to 20 percent; reduces chemical P precipitation costs.

    Regulatory and financial drivers for WRRFs: EA WINEP (Water Industry National Environment Programme) P limits (0.1 to 0.25 mg/L TP at large STWs in sensitive areas) simultaneously require improved P removal and incentivise P recovery (struvite recovery as compliance solution); Water UK Net Zero 2030 target: all water sector greenhouse gas emissions at net zero by 2030 (Scope 1 and 2) and by 2030 for Scope 3; energy recovery from biogas is the primary lever for electricity emissions reduction (Water UK benchmark: 2.5 to 3.5 kg CO2e/tonne treated for energy-efficient large STWs). UKWIR Carbon Accounting for the Water Industry (UKWIR 22/CL/01/5): standardised carbon accounting methodology for sludge digestion and energy from biogas; Scope 1 emissions from biogas combustion classified as biogenic (zero carbon in CO2e accounting per IPCC guidelines); sludge biosolids land application releases N2O (global warming potential 298 x CO2; 1 to 2 percent of applied N converts to N2O); N2O from biological nitrification-denitrification in aeration tanks: 0.005 to 0.05 percent of influent TN as N2O off-gas. Commercial revenue: struvite product (branded recovered struvite fertiliser, UK price approximately GBP 250 to 400 per tonne); biosolids to agricultural spreading (avoided landfill cost GBP 100 to 150/tonne DS; agricultural spreading cost GBP 30 to 80/tonne DS; value of nutrients approximately GBP 20 to 40/tonne DS as fertiliser equivalent); RGGO (Renewable Gas Guarantee of Origin) certificates for biomethane injection to grid at approximately GBP 30 to 60/MWh.

    Post your water resource recovery project

    Frequently asked questions

    What is a water resource recovery facility and how is it different from a sewage treatment works?

    A water resource recovery facility (WRRF) and a sewage treatment works (STW) perform the same core function - treating wastewater before it is discharged to the environment - but differ in their operational philosophy and outputs. Traditional STW: the primary objective is to remove pollutants (BOD, SS, ammonia, phosphorus) to a level that complies with the Environmental Permit discharge consent; by-products (sludge, biogas) are managed primarily as wastes; treatment processes are selected for compliance, not resource extraction. WRRF: reconceptualises wastewater as a carrier of resources (energy, nutrients, water, materials) that should be extracted and recovered; operational objective is zero waste - every output stream is a product; treatment processes are selected for resource recovery as well as compliance. Practical differences: a WRRF will typically: (1) Install anaerobic digestion with thermal hydrolysis pre-treatment to maximise biogas yield and generate electricity from biogas CHP; (2) Recover struvite from centrate reject water and market it as slow-release fertiliser rather than returning all P to the inlet; (3) Treat tertiary effluent for non-potable water reuse rather than discharging all flow to the receiving watercourse; (4) Install heat pumps to recover low-grade thermal energy from final effluent for district heating rather than wasting the heat in the discharge; (5) Recover cellulose from primary screenings rather than sending all screenings to landfill. The term WRRF was introduced by the Water Environment Federation (WEF) in 2013 and endorsed by IWA to reflect this broader operational concept; in the UK, all major STWs operated by water companies are moving towards WRRF principles under Net Zero and circular economy obligations.

    How much energy can be recovered from wastewater treatment?

    Energy recovery potential from wastewater: theoretical maximum: wastewater contains approximately 3 to 10 kWh of chemical energy per m3 (as organic matter); current state of the art recovers 0.3 to 1.0 kWh/m3 as electrical energy; a typical large STW (greater than 100,000 PE) treating municipal wastewater currently uses 0.3 to 0.6 kWh/m3 in total (aeration is typically 50 to 60 percent of site energy use; pumping 15 to 25 percent; other 15 to 30 percent); if all biogas energy is recovered, energy self-sufficiency ratio: large UK STWs with THP/AD currently achieve 50 to 80 percent electrical self-sufficiency from biogas CHP; theoretical maximum with optimised digestion approximately 100 to 130 percent (energy positive at site boundary). Key technologies: (1) Anaerobic digestion (AD) + CHP: most important recovery route; biogas yield from sewage sludge (at 55 to 65 percent VS destruction with THP): 0.3 to 0.5 Nm3 CH4/kg VS destroyed; calorific value CH4 35.8 MJ/Nm3; CHP electrical efficiency 35 to 42 percent; heat recovery 40 to 45 percent; example: large STW 200,000 PE; sludge production approximately 9,000 tonnes DS/year; biogas generation approximately 7 million Nm3 CH4/year; CHP electricity generation approximately 8 to 10 GWh/year; equivalent to approximately 70 to 80 percent of site electrical demand; (2) Biomethane grid injection: alternative to CHP; upgraded biogas (greater than 97 percent CH4) injected to gas distribution grid under GS(M)R; revenue from RGGO certificates GBP 30 to 60/MWh; (3) Heat pumps: final effluent at 10 to 20 degrees C; large screw or centrifugal heat pump (3 to 5 MW); COP 3 to 5; useful heat output 40 to 45 degrees C; used for district heating (Whitchurch STW, Bristol Water); (4) Micro-hydro: inline turbines at works with available head (greater than 10 m); 5 to 50 kW generation.

    What nutrient recovery technologies are being deployed at UK STWs?

    Nutrient recovery technologies deployed or in active trial at UK sewage treatment works: (1) Struvite crystallisation: most commercially mature technology; fluidised bed crystalliser reactor installed in centrate return line from sludge dewatering centrifuges; centrate feed: NH4-N typically 500 to 1,500 mg/L, PO4-P 50 to 300 mg/L; MgCl2 dosed (Mg:P molar ratio 1.2 to 1.5) at pH 7.5 to 8.2; struvite crystals (MgNH4PO4.6H2O) grow on seed material and harvested at 1 to 5 mm diameter; product marketed as a branded slow-release fertiliser (NPK 5-28-0 plus 10 percent Mg) or equivalent; UK installations: Slough STW (Thames Water), Davyhulme STW (United Utilities), Avonmouth STW (Wessex Water), Southam STW (Severn Trent); P recovery 60 to 85 percent of centrate P; annual struvite production UK sector: approximately 2,000 to 4,000 tonnes per year (growing with WINEP P obligations). (2) Ammonium stripping: steam or air stripping of ammonia from centrate (or digested sludge liquors) at elevated temperature (80 to 90 degrees C) and pH (10.5 to 12.0); ammonia transferred to gas phase; absorbed into H2SO4 to produce ammonium sulphate solution (21 percent N) or ammonium nitrate; product used as nitrogen fertiliser; UK trials at Minworth STW (Severn Trent Water); full-scale commercial in Netherlands and Germany; applicable where centrate NH4-N exceeds 500 mg/L. (3) Ion exchange for ammonia: zeolite clinoptilolite (NH4+ selective ion exchange; regenerated with NaCl or NaNO3 brine; concentrated eluate undergoes stripping or struvite precipitation); lower operating cost than steam stripping; UK research scale. (4) Cellulose recovery from primary screenings: mechanical screening (0.5 mm fine screen) captures cellulose fibres from primary sewage; dewatered and dried; used as biofuel or soil conditioner; UK installations: Anglian Water, Wessex Water; approximately 1,000 to 3,000 tonnes dry cellulose per year per large STW.

    What are the regulations for biosolids use in agriculture from UK STWs?

    Biosolids (dewatered digested sludge from sewage treatment works) applied to agricultural land in the UK are regulated under: (1) Sludge Use in Agriculture Regulations 1989 (SI 1989/1263, as amended), implementing EU Sewage Sludge Directive 86/278/EEC (UK retained); regulations set maximum metal concentrations in soil receiving biosolids: Zn less than 200 to 300 mg/kg (depends on soil pH); Cu less than 80 to 100 mg/kg; Ni less than 50 to 75 mg/kg; Cd less than 3 mg/kg; Pb less than 300 mg/kg; Hg less than 1 mg/kg; Cr less than 400 mg/kg; also set maximum application rates (250 kg total N/ha/year for untreated sludge; 250 kg/ha/year for treated sludge); requirements for soil and sludge testing before application (soil pH greater than 5.0; soil metal analysis); minimum soil pH maintained above 5.0 during and after application. (2) Safe Sludge Matrix (SSM): voluntary agreement between Water UK (formerly Water Services Association), ADAS, and the major food industry bodies (LEAF, Fresh Produce Consortium); SSM specifies: no untreated (raw) sludge on any agricultural land for food production; treated sludge (conventional pasteurisation at 70 degrees C for 30 minutes, or thermophilic digestion) restricted on certain food crops (salad crops, soft fruit); enhanced treated sludge (advanced digestion at greater than 55 degrees C plus pH greater than 12, or THP + AD) may be applied with shorter harvest intervals; compliance with SSM is required by supermarket supply chain standards (Red Tractor, LEAF Marque). (3) EA Environmental Permit or exemption: spreading biosolids under Sludge Regulations uses a registered exemption (U9 exemption for spreading treated sludge; limits 10 tonne DS/ha per application; soil and sludge records to EA). (4) Nitrates Regulations: in Nitrate Vulnerable Zones (NVZs), total N from all organic manures (including biosolids) limited to 250 kg N/ha/year; closed periods for spreading (1 September to 31 January on sandy or shallow soils).

    Illustrative scenario · Municipal wastewater resource recovery

    A composite drawn from typical projects in this category, not a single client engagement. Figures are indicative.

    Challenge
    A 160,000 PE sewage treatment works in the West Midlands was facing tightening WINEP phosphorus consent (total P from 2.0 to 0.5 mg/L) while simultaneously needing to reduce its Mogden-formula trade effluent charges by GBP 180,000 per year from a high-strength industrial discharge that was contributing to internal recycle P loading through the sludge centrate return stream.
    Approach
    A fluidised-bed struvite crystalliser was installed on the centrate return line from the belt press dewatering stage, removing 78 percent of orthophosphate from the centrate (reducing centrate-return P load from 62 to 14 kg/day, which had previously represented 28 percent of total inlet P load). This allowed the chemical P precipitation system (ferric sulphate dosing) to be reduced from 18 mg/L to 8 mg/L, achieving consistent final effluent TP below 0.45 mg/L. The industrial trade effluent P contribution was addressed by negotiating a revised Trade Effluent Consent with the industrial discharger, incorporating on-site P pre-treatment.
    Outcome
    WINEP consent compliance of TP below 0.5 mg/L achieved within 8 months of commissioning. Struvite production of 620 tonnes per year sold at GBP 310 per tonne (GBP 192,200 per year revenue). Ferric sulphate cost reduced by GBP 95,000 per year. Total capital cost of the crystalliser installation GBP 740,000; simple payback 2.6 years. Carbon savings: 140 tonnes CO2e per year from reduced ferric sulphate production and transport. Water UK Net Zero pathway reporting acknowledged the struvite system as an AMP8 circular economy exemplar.

    Questions to ask shortlisted providers

    5
    1. 01

      What is the current energy self-sufficiency ratio at your STW (percentage of site electricity demand met from biogas CHP), and has a THP pre-treatment option been assessed to increase biogas yield?

      Large STWs (above 50,000 PE) with mesophilic AD achieving less than 50 percent electrical self-sufficiency typically have an economic case for THP installation (increasing VS destruction from 48 to 62 percent and biogas yield by 20 to 30 percent); the capital cost of GBP 3 to 8 million is typically recovered within 5 to 8 years through energy savings, reduced sludge volumes, and dewatered cake solids improvement.

    2. 02

      Is there a phosphorus return load from centrate or liquors that is not captured in the site mass balance, and has a struvite recovery system been assessed for the centrate stream?

      Centrate recycle from sludge dewatering typically contributes 15 to 30 percent of total inlet P to the works while representing only 1 to 3 percent of total flow; without struvite recovery on the centrate, ferric sulphate dose must be sized for the full P load including this internal recycle, creating a significantly higher chemical cost than a hybrid ferric plus struvite system.

    3. 03

      What is the current end use of your biosolids and does it comply with the Safe Sludge Matrix (SSM) for all receiving farms in your sludge-to-land programme?

      Supermarket supply chain audits (Red Tractor, Leaf Marque) require biosolids applied to contracted farms to comply with SSM; any non-compliance (e.g. enhanced treated sludge applied to salad crops within an excluded harvest interval) exposes the water company to supply chain rejection and potential Sludge Regulations enforcement by the EA.

    4. 04

      Has your STW assessed and applied for RGGO (Renewable Gas Guarantee of Origin) certificates for biomethane injected to the gas grid or for biogas used in on-site CHP generation?

      RGGO certificates for biomethane qualify for the Non-Domestic RHI (Renewable Heat Incentive) at approximately GBP 30 to 60 per MWh under the tariff applicable at the time of accreditation; for a 100,000 PE works generating 5 million Nm3 CH4 per year, unclaimed RGGO revenue represents GBP 50,000 to 100,000 per year in missed income.

    5. 05

      What is the WINEP investment timeline for phosphorus compliance at your works, and has an integrated process design been completed comparing chemical-only, biological (EBPR), and hybrid P removal approaches?

      WINEP P consent tightening at large STWs to 0.5 mg/L or below cannot reliably be achieved by ferric sulphate dosing alone at high flow conditions; biological P removal (EBPR via anaerobic selector) combined with post-precipitation can achieve 0.3 mg/L TP at lower chemical cost, but EBPR performance is sensitive to industrial discharge composition and must be validated against site-specific influent data before adoption.

    What drives cost in this category

    4
    Thermal hydrolysis pre-treatment capital cost versus energy and sludge volume savings
    A THP system for a 100,000 PE STW (8 tonnes DS/day sludge feed) costs GBP 4.5 to 7 million installed; the return on investment comes from: biogas increase (20 to 30 percent, GBP 80,000 to 150,000/year extra electricity generation); dewatered cake DS improvement from 27 to 38 percent (reducing haulage and disposal cost by GBP 100,000 to 200,000/year); sludge volume reduction of 15 to 25 percent; combined savings of GBP 200,000 to 350,000/year support a 14 to 25-year payback on capital.
    Chemical P removal operating cost (ferric sulphate) versus biological alternative
    Ferric sulphate dosing at 15 mg/L for a 10,000 m3/day STW costs GBP 80,000 to 120,000/year in chemical alone, plus disposal of ferric sludge (approximately 30 percent increase in sludge production from chemical precipitation); EBPR (Enhanced Biological Phosphorus Removal) via anaerobic selector costs GBP 5,000 to 15,000/year in operational monitoring but has higher capital cost (GBP 200,000 to 800,000 for zone modification); the break-even typically occurs at works above 30,000 PE with sustained operation.
    Sludge disposal route cost and regulatory compliance buffer
    Agricultural spreading of digested biosolids costs GBP 30 to 80 per tonne DS (haulage, spreading, and farm liaison) and earns a nitrogen fertiliser credit of approximately GBP 20 to 40 per tonne DS; landfill disposal costs GBP 120 to 200 per tonne DS; the risk premium for agricultural spreading is the regulatory compliance requirement (SSM, NVZ, EA exemption records), and any disqualifying event (heavy metal exceedance, SSM violation) forces emergency diversion to landfill at a cost uplift of GBP 80 to 150 per tonne DS.
    Struvite crystalliser capital and payback period
    A fluidised-bed struvite crystalliser unit (suitable for 60,000 to 120,000 PE works with centrate P load of 30 to 80 kg/day) costs GBP 600,000 to 900,000 installed; revenue from the struvite product (GBP 250 to 400 per tonne struvite) plus chemical savings (ferric sulphate reduction) and potential reduction in Mogden-formula trade charges typically delivers a payback of 3 to 6 years; payback shortens significantly where WINEP P consent requires investment in additional chemical precipitation capacity that struvite recovery displaces.

    Key regulations and standards

    4
    EA WINEP (Water Industry National Environment Programme) - Phosphorus Consent Tightening
    WINEP sets legally binding phosphorus discharge consents for STWs in sensitive catchments under the EA Environmental Permit; consent tightening to 0.5 mg/L TP (AMP8, 2025 to 2030) applies to approximately 850 STWs in England; investment must be in place by 2027 for the majority of works; Ofwat AMP8 allows GBP 2.2 billion for WINEP nutrient obligations across the sector.
    Sludge Use in Agriculture Regulations 1989 (SI 1989/1263) and Safe Sludge Matrix
    Biosolids applied to agricultural land must comply with soil and sludge metal limits; application requires prior soil analysis; the Safe Sludge Matrix (Water UK/ADAS voluntary framework) further restricts use of untreated sludge near food crops; EA enforces compliance through the registered U9 exemption system; any breach can result in exemption withdrawal, requiring emergency alternative disposal routes.
    UK FPR (Fertiliser Products Regulation) CMC 12 - Struvite as CE Fertilising Product
    Struvite produced from wastewater can be placed on the market as a CE-marked fertilising product under EU FPR Regulation 2019/1009 (UK retained) Component Material Category 12 (CMC 12) for struvite; product must contain minimum 5 percent P2O5 and meet heavy metal and contaminant limits; CE marking allows sale across GB and EU markets; a commercially recovered struvite product is registered under CMC 12 in the UK market.
    COMAH 2015 (Control of Major Accident Hazards) for Ammonia and Biogas
    STWs with anaerobic digestion generating significant biogas volumes (above COMAH Lower Tier threshold: 50 tonnes) or with ammonia stripping using anhydrous ammonia (above 50 tonnes Lower Tier) are subject to COMAH 2015; duty to prepare a Major Accident Prevention Policy (MAPP); HSE and EA are joint competent authority; resource recovery technologies that increase on-site chemical inventories must be assessed for COMAH threshold implications.

    Related categories

    Resource Recovery

    Nutrient Recovery CompaniesBrine Valorization CompaniesBiosolids Management CompaniesSludge-to-Energy Companies

    Water Reuse

    Industrial Water Reuse CompaniesZero Liquid Discharge (ZLD) CompaniesMinimum Liquid Discharge (MLD) Companies

    Key Industries

    Mining Wastewater Treatment CompaniesChemical & Petrochemical Water Treatment CompaniesManufacturing Water Treatment Companies

    Aguato Marketplace

    Have a water challenge to solve?

    Post your project and our engineers shortlist the providers that fit. Compare proposals, credentials and pricing in one place.

    Post a projectBrowse providers
    Aguato

    The operational layer for the water industry.

    Connecting industrial buyers with water and wastewater specialists. Aguato is the ecosystem. Nepti is the intelligence engine.

    Clients

    • Post a project
    • Browse providers
    • Browse by category
    • How it works
    • References

    Providers

    • Browse projects

    Intelligence

    • Nepti
    • Design and Diagnose
    • Ask Nepti

    Company

    • About
    • Team
    • Insider
    • Thirsty Planet
    • The Element Book
    • Water calculators
    • Get in touch
    © 2026 Aguato·All rights reserved
    TermsPrivacy