Aguato

    COD and BOD removal from molasses wastewater by digester, fermenter and aerated lagoons

    An agro-chemical and food works at Muhoroni, Kenya, produces acidic molasses-based wastewater of very high organic strength. Its existing treatment plant produces biogas in an anaerobic digester, but the effluent released to the environment often exceeded the discharge standards for COD and BOD, so the plant was assessed and an upgrade designed.

    Treatment line

    1. 01Anaerobic digesterProduces biogas; ran at a 28-day retention time before optimisation.
    2. 02Bulk volume fermenter
    3. 03Aerated lagoonsLast stage before discharge to the environment.

    What the source found

    The existing plant removed 97% of COD, 99% of BOD and above 99% of suspended solids, yet the effluent still did not meet the discharge standards. Most suspended solids were removed in the digester. A shorter digester retention time and new aeration tanks with secondary clarifiers ahead of the lagoons were designed to raise biogas output and reach compliance.

    Grab and composite samples of the digester inlet and outlet and of the lagoon inlet and outlet, used to work out removal for each unit and for the whole plant.

    Water in, water out

    ParameterSymbolUnitInletOutletRemoval
    BODBODmg/L43,00030099.3%
    CODCODmg/L120,0004,00097%
    Total suspended solidsTSSmg/L95,00054399.4%
    pH4.258.5
    Temperature°C4022

    Inlet: raw molasses-based wastewater. Outlet: treated effluent released to the environment after the aerated lagoons. Characterisation of the existing plant before any retrofit; the number and dates of samples are not stated. Values and units are as the published source prints them. Removal is worked out from the two values, or is the source's own figure where it prints no pair.

    Similar references