Water treatment solution providers, shortlisted.

A-Consult specialise in providing solutions for the storage and handling of liquids in the agricultural, water industries and industrial sectors. Established in 1986 we have successfully constructed over 10,000 tanks throughout the United Kingdom and Europe. Aqua-Tank provides a safe, cost effective method of containment with numerous applications within the water, waste and industrial sectors. Guaranteed factory-controlled quality combined with a robust structure along with tried and tested design principles, offer life expectancy previously only achieved with cast in situ installations. A-Consult are the market leaders in the design, manufacture and installation of precast concrete storage tanks. SETTLEMENT TANKS Settlement tanks can be supplied with either an integrated concrete coping top which supports the travel of either a full or half bridge scraper. Tank sizes range from 4.0m diameter to greater than 50.0m, designed to allow backfilling, enabling access to M&E equipment such as scraper bridge, motor and travelling wheels. Incorporating the patented EPDM jointing seals, the post tensioned settlement tanks can be designed to accommodate pipe work entries through the precast wall panels. Design and constructed to BS8110 and BS8007 and compliant to all relevant Euro Codes. FILTER TANKS The A-Consult tank system has been used to construct many types of filter tanks. The tanks can be designed as water retaining structures if necessary, with letter box opens to facilitate the trickling filtration systems. PROCESS TANKS In such a volume related sector the A-Consult precast concrete tank system offers extensive flexibility in both tank diameters and wall heights. Diameters start at 4m and increase in increments of approximately 350mm, wall heights start at 2m and increase in increments of 100mm topping out at 12m. STORAGE TANKS A-Consult tanks have been used for the storage of many different materials on both wastewater treatment plants along with sewage treatment plants. All materials used in the construction of our tanks are DWI or WRAS approved allowing the storage of potable water. LEACHATE TANKS With a 50-year design life the A-Consult precast concrete tank system offers a cost effective and robust solution to many process and storage applications.

Turbin Industrial Water Solutions B.V. is a Netherlands-based company specializing in engineering and construction services for water treatment infrastructure. They cater to manufacturing and utility sectors, providing comprehensive solutions for water management across Europe.

AFFCO UK forms a part of the AFFCO Group, supplying flow control and actuated solutions worldwide. Priding itself on housing a diverse range of experts in flow control solutions, AFFCO UK is ambitious, forward-thinking, and brings a fresh approach to the valve industry. AFFCO UK not only supplies products, but also provides services and solutions to customers. With a strong commitment to quality, innovation, and reliability, AFFCO UK delivers engineered products that support critical infrastructure across the water, wastewater, sewage, and desalination sectors. AFFCO UK offer a comprehensive range of valves, including gate, butterfly, non-return, control valves and more. Our portfolio is designed to meet the rigorous demands of the modern water networks, ensuring durability, efficiency, and compliance with UK and international standards. We are proud to hold ISO 45001, ISO 9001, and ISO14001 certifications. These reflect our commitment to upholding the supply of high-quality products, whilst maintaining a safe and environmentally conscious business environment. Carrying a wide range of WRAS approved products for safe and reliable use on potable water systems. AFFCO UK believes in solutions, not just products. With six core promises – ranging from Global Leadership with Local Commitments to Engineered Savings – every project undertaken is guided by these principals. AFFCO UK team combines technical expertise with a responsive, customer-focused approach, ensuring that every solution is tailored and delivered to specific customer needs as seamlessly as possible.

AECOM is one of the world’s leading multi-disciplinary engineering consultancy firms working for the water industry worldwide. Ranked third in the ENR rankings we work across all aspects of water infrastructure and delivery systems to ensure cost effective and quality design for all project elements. We are advising on the strategic implications of climate change and sustainability on water infrastructure and resources management as well as design new build facilities and rehabilitation of older assets to meet the needs of water providers across the UK. We provide framework support as well as advising on the implications of new technologies, energy management and investments for clean and wastewater processes.

Aarsleff Ground Engineering Ltd is the UK subsidiary of Per Aarsleff A/S, Denmark’s leading civil engineering contractor. Aarsleff are equipped to work on several types of site delivering specialist ground engineering solutions to solve technically challenging ground related problems in the UK and abroad.

3rd Light Media provide technical documentation and design services for water and wastewater projects, both in the UK and internationally. We provide a range of documentation for projects, helping clients achieve their handover requirements and producing high quality documents which provide the end users with the information they need to operate and maintain the plants. We are a market leader in driving digital innovative solutions to our clients to ensure documentation is presented in new and dynamic ways, this includes development of web-based O&M manuals which can integrate with client I.T. systems such as SharePoint; Graphical design to enable data and documentation of assets on a site plan or P&ID to be available within just a few clicks of a button. Additionally, we have developed a QR coded asset tagging system and mobile App. Our services mean we can provide our clients with a single source for all handover documentation requirements. The services we can provide include: Operating and Maintenance Manuals (O&Ms) Site Operating Manual (SOM) Health & Safety Files Asset Data Registration Training Manuals Site Drawings (P&IDs, Process Flows, Site Layouts and Plans, GA’s, Single Line Diagrams and more) AutoCAD Drafting Services Additionally, we also provide a range of onsite services to further enhance being a one stop provider for all your project handover needs. Some of the onsite services we provide include: Asset Identification Tags (to meet all individual client specifications) Pipe Banding to BS1710 Site signage and labelling We also provide a range of design and pre-construction services, with experience when working with Tier 1 contractors at ECI / Outline Design stages of projects including: Functional Design Specifications Control Philosophies Factory Acceptance & Site Acceptance Tests for Software Testing Commissioning Plans and Sequencing Asset Condition Reports Verification Survey Works (Producing P&IDs, ICA and Electrical Design Proposals) We work as an integrated team with both contractors and clients to ensure all aspects of project handover are achieved to the highest standard. We are able to do this with our vast knowledge of individual water companies asset standards and specifications. We are also experienced in using portals such as TWEXnet, Asite, Aconex, Business Collaborator and Conject for uploading documents. Our team comprises of skilled and experienced site and process engineers with a vast knowledge of both water and wastewater treatment systems. Our team of engineers all hold EUSR Water Hygiene and CSCS cards as well as water company specific requirements such as the Thames Water Safety Passport. We also have an in-house graphic design team providing professionally drawn illustrations and drawings which are used within our documentation, helping to visualise written descriptions and processes. Our philosophy is to take the burden of producing documentation on projects away from our clients. Being skilled process engineers, we will visit sites to gather information and we work with your supply chain to coordinate the availability of all required documents and drawings, ensuring compliance with the end clients standards. We write all the technical content and detail to the highest standard, supported by expertly drawn diagrams and illustrations. Some of the water companies we have worked with include: Thames Water Affinity Water Yorkshire Water Southern Water Severn Trent South East Water United Utilities Welsh Water Bristol Water Essex & Suffolk Water Irish Water Haya Water We work both directly with water companies and Tier 1 and Tier 2 contractors. We work on projects of all sizes, from minor schemes to major £100+ million projects.

ACWA is one of the leading UK players delivering innovative sustainable process solutions and technologies for both municipal and industrial clean water, wastewater and bio-solids treatment. ACWA design and execute resilient cost-effective technologies which address the needs of our clients and their regulatory drivers whilst helping to address climate change. ACWA provides expert technical products and services to the water, wastewater and industrial sectors. Our expertise combines practical experience with academic knowledge across a wide range of specialisms. These include: Design and build (digital delivery and off-site manufacture) Commissioning Project management We apply our extensive expertise to help our clients find the best sustainable, cost-effective solutions that meet all their requirements. We serve our wholesale water, wastewater and biosolids markets plus industrial food and beverage clients with their water needs. Our primary specialist areas are: Water treatment Wastewater treatment Industrial effluent Food and beverage TECHNOLOGIES In finding the best solutions we look at innovative ideas and turn them into reality producing some of the most sustainable technological solutions on the market. Our technologies include: Nitreat® Ion Exchange: This is a reversible nitrate removal process by which ions are interchanged between a solid and a liquid with no substantial structural changes in the solid. AquaPyr™ Tertiary Solids Removal Filter: This process is a simple filter that can also remove phosphorous using innovative cleaning technology producing low waste and using less power than other filters. Amtreat® High Rate Ammonia Removal: This process is a high-rate activated sludge process designed to treat wastewater streams and sludge liquors containing high concentrations of ammonia. DESIGN & BUILD ACWA’s in-house design capability is the architecture on which each project is meticulously built. The latest 3D models create precision imaging of all types of installations from a complex water or effluent treatment plan to a single piece of equipment to be integrated into an existing system. Through in-house engineers ACWA deliver a complete range of technical design and build expertise across projects and programmes of work that include, civil, mechanical, process and electrical, instrumentation and control and automation. PROJECT MANAGEMENT ACWA’s team of highly-experienced project managers, engineers and technicians work closely with clients and key project team members to deliver solutions in an efficient, timely, cost-effective and environmentally-responsible manner. Project management includes ensuring complete compliance with all relevant regulations, both European, national and where relevant, international, while at all times maintaining a clear focus on the project remit. Our responsibility is to ensure each project is a complete success, both for our client and for the environment. We actively identify and manage risks, issues, changes to requirements and quality standards to guarantee the best possible outcome. COMMISSIONING For hands-on commissioning services, ACWA is an industry leader, focussed on complex water and wastewater facilities for municipal and industrial clients. Commissioning is an essential step in project delivery. Without it we cannot have assurance of a quality outcome. Our in-house team provides comprehensive commissioning services getting involved at project start-up to take the project through planning design, construction and turnover, on time and on budget. ACWA’s multi-disciplined knowledge and expertise includes, system design, electrical testing, operations and maintenance (incl. training) as well as systems and process diagnostics, providing an authoritative and effective resource. WATER TREATMENT Our water expertise comprehensively covers the filtration spectrum from conventional strainers and filtration systems to the most advanced reverse osmosis and ion exchange technologies. Microfiltration Ultrafiltration Nanofiltration Reverse Osmosis / Desalination Ion Exchange Conventional Water Treatment Pressure Filters Gravity Filters Chemical Treatment Granular Activated Carbon WASTEWATER TREATMENT The days of wastewater disposal by methods that had no consideration for the implications to the environment are over. As water scarcity increases and the pressure to comply with ever increasing environmental legislation for effective effluent treatment intensifies, it has never been more important to choose the right wastewater partner who can provide a range of effective processes. ACWA can deliver those solutions. Preliminary Treatment Aerobic Biological Treatment Anaerobic Treatment Membrane Bio Reactor High-Rate Ammonia Removal (Amtreat®) Scrubber Effluent Treatment Plant Effluent Re-use Tertiary Treatment Sludge Treatment

Academy Geomatics Ltd is a leading provider of precise surveying and geospatial solutions. Specialising in topographic surveys, 3D laser scanning, and geospatial data analysis, the company delivers accurate, high-quality results tailored to the needs of the construction, engineering, and environmental sectors. With a commitment to innovation and excellence, Academy Geomatics leverages cutting-edge technology and expert knowledge to support projects of all sizes across diverse industries. Their professional team ensures reliable, efficient, and cost-effective services to meet client objectives with precision and integrity.

B&C Electronics Srl is a leading Italian manufacturer specializing in liquid analyzers and sensors. They provide advanced instrumentation and monitoring solutions for various industries, including chemicals, food and beverage, and utilities, with a focus on real-time monitoring and smart technology integration.

ChungHo Nais Co., Ltd. is a leading manufacturer of environmental health care appliances, specializing in innovative solutions for improving water quality and promoting healthy living environments across the Asia-Pacific region.

Royal HaskoningDHV is a leading global consulting engineering firm based in the Netherlands. They provide innovative and sustainable solutions across various industries, leveraging cutting-edge technology and a multidisciplinary approach to enhance society and shape the future.

Acevision (Beijing) Exhibition Co., Ltd is a professional organizer of international exhibition service. We has been committed to plan, organize and hold international prestigious exhibitions and conferences in recent years, and adhere to the concept that is “Serving Exhibitors as our duty, Building the first brand of the professional exhibition in China”.

VGE B.V. specializes in UV-C disinfection solutions, providing advanced equipment for water purification. Based in the Netherlands, the company serves the European market, focusing on utilities and technical components industries with medium-scale operations.

GWS Industries, based in Italy, specializes in the design and manufacture of advanced water dispensers for domestic, office, and hospitality sectors. Their products, known for compactness and versatility, connect directly to water networks, ensuring eco-friendly solutions that meet strict safety standards.

Midea Kitchen and Water Heater Appliances, a leading Chinese company, is renowned for its extensive range of home appliances, including water filtration and purification systems. As part of the world's largest appliance producer, Midea focuses on innovation and quality, serving markets across China and the Asia-Pacific region.

Aqua Glory Co., Ltd. is a South Korean company specializing in the manufacturing and provision of advanced water treatment technologies, serving utilities and manufacturing sectors across the Asia-Pacific region.

Aquatech Global Events is a premier platform dedicated to advancing a sustainable water future. Based in the Netherlands, it serves as a hub for professionals and researchers in the water industry, facilitating knowledge exchange and innovation across Europe.

BEIJING BEASUN ELECTRONIC Co.,LTD specializes in the manufacturing of electronic ballasts, including UV ballasts, for water treatment applications. The company serves industries such as construction, manufacturing, and utilities, providing advanced technology solutions for water purification and management.

YUNDA H&H TECH(TianJin) CO., LTD. is a leading water filter manufacturer in China, certified with ISO9001 and NSF standards. Specializing in advanced filtration technologies, the company serves diverse industries with high-quality water purification solutions.

Water, Wastewater and Seawater Treatment Systems