Water treatment solution providers, shortlisted.

Morgan Marine Ltd, part of the Morgan GRP, has been providing housing solutions to the Utility and Construction sectors since 1965. We design, manufacture and install GRP and Steel housing solutions from standard size cabinets in the Morgan Roadside Range to large bespoke enclosures. We have a comprehensive portfolio of LPCB security rated products tested and certified to the LPS 1175 standard, independently tested by BRE, offering security levels SR2, SR3 and SR4, these include Steel enclosures, GRP enclosures and single and double door sets. We also specialises in designing housings to blend aesthetically to its environment by offering brick, stone and timber effect complete with slate effect roofs if required.

Established just as PLM was gaining popularity in 1995, Majenta Solutions have since become a specialist leader in digital supply integration Our origins With an initial focus on supporting large automotive OEMs with PLM strategy, Majenta played a crucial role in enabling the supply chain to embrace new systems and technological advancements. Over the years, we have kept pace with technological developments and expanded our expertise to support the transportation and construction industries, among others. Our expertise Leveraging our deep understanding of PLM, Majenta excels in ensuring regulatory compliance, streamlining workflows, and enhancing collaboration across global supply chains. In the construction industry, we support BIM and other advanced digital construction practices. Our journey reflects a commitment to innovation and excellence, consistently adapting to industry changes and delivering the best digital solutions for design and engineering. Our aim Today, we act as a trusted partner for businesses looking to navigate the complexities of digital supply chains and digital transformation. Our services span multiple sectors and project types, but our aim is always the same — ensuring the right information is in the right place, at the right time. Why Choose Majenta to partner with? The automotive and construction industries are evolving faster than ever, and mastery of digital engineering processes, standards, and tools is crucial for any organisation looking to maintain a competitive edge. Majenta is your expert guide — helping you navigate complex technologies, offering practical support and training and developing your potential for growth and success in the sectors you serve. We’re a team of seasoned professionals with extensive real-world project experience. Our partner network includes industry-defining brands such as BSI, BIMobject and COBie. And our clients range from specialist startup firms to household names such as Nissan, Jaguar Land Rover, University of Liverpool, Willmott Dixon and Vinci. It’s a winning combination — allowing us to deliver transformational consultancy that adds measurable value to your business. With Majenta in your corner, there’s no limit to what you can achieve.

Lloyd Morris Electrical Limited is a company of electrical engineers, specialising in the design, manufacture and installation of electrical distribution and control systems for industrial and commercial applications. Having established the company in 1974, it has since developed in to a well-recognised and reputable organisation within the industry and is keen to develop professional and pro-active relationships with its clients. LME offers Design for Manufacture and Assembly (DfMA) across the complete electrical service supply. The off-site manufacture of pre-assembled and cabled low voltage switch/plant rooms offers significant benefits in relation to safety, quality, cost and program. Control panels LME pride ourselves in being at the forefront of control panel manufacturing. LME have an unrivalled level of expertise and service, and we make sure that all our control panels are designed and built to match your exact requirements. LME provide control panels constructed from Form 1 through to Form 4. With our control panels we consider the space available and all special site requirements. We can supply off the shelf or bespoke steelwork so that each order can be custom built to specific requirements and comply with your general and exact specifications. Intelligent design motor control centres minimise the number of components required as various functions are integrated into single intelligent devices. LME offer intelligent motor control centres manufactured to the same construction range as our conventional units which are all bespoke and are BS EN61439-1&2 compliant. LV switchboards LME manufacture bespoke LV switchboards, each assembly can be custom built to specific requirements and comply with client’s exact specifications providing LV switchboards constructed from Form 1 through to Form 4, Type 1 to Type 7. With our LV switchboards, we can accommodate various types of cable entries whether top, bottom or a mixture of both, front or rear access, or we can even manufacture a hybrid solution using a combination of any form and type. Electrical design An important aspect in the development of any project is the design and provision of professionally presented documentation. Therefore, to meet the varying needs of each client, our team of draughtsman are well equipped with the latest AutoCAD systems. Our project engineers use software tools to perform cable and lighting calculations, cable and instrumentation scheduling, rating of protection devices, and overall contract programming and scheduling. Electrical installations LME have the resource, capability, and experience to provide a complete electrical installation, for any water plant or factory. With a large, fully qualified, and competent workforce combined with an extensive fleet of vehicles, no task is too large and no location too remote. With this structure and experience, we can offer a comprehensive range of installation services covering locations throughout the United Kingdom. Systems integration To provide a fully integrated approach to projects, the company has the facility to develop complex and highly structured software. Our systems engineers have considerable experience in all aspects of software design and development, ranging from basic PLC systems and HMI/SCADA, controlling process and manufacturing plant, through to commercial and industrial databases and high-level management information systems (MIS), producing essential business information.

Advanced Pumping & Engineering Solutions With a heritage dating back to 1926, KGN Pillinger is a trusted partner in engineering and manufacturing advanced pumping solutions for the UK’s critical water infrastructure. We combine decades of experience with a progressive investment in technology to deliver robust, reliable, and compliant systems designed for long-term performance. We specialise in the design and in-house manufacture of water and wastewater pumping equipment built to withstand the demands of the water sector. Our proven resilience and expertise have made us a trusted supplier to major UK Water Utilities and the Ministry of Defence. Capabilities Our core capabilities include: Bespoke water boosting systems for network resilience. Packaged pumping stations for sewage and wastewater management. Durable pumping equipment engineered for all sectors. Integrated lifecycle support and maintenance services. Design & Manufacturing Excellence Our end-to-end project management ensures quality and accountability from concept to commissioning: Advanced 3D CAD Design and Building Information Modelling (BIM) support for seamless project integration. In-house fabrication and assembly using 316L Stainless Steel as standard for superior corrosion resistance and asset longevity. A state-of-the-art, fully equipped UK manufacturing facility ensuring quality control and supply chain security. Lifecycle Support for Critical Infrastructure Our dedicated Service Division ensures the operational reliability of your assets: Emergency support and nationwide services to ensure uninterrupted service. Professional installation, commissioning, and planned maintenance contracts. All KGN engineers are CSCS certified, CRB checked, and trained for confined space work, ensuring safe and compliant service on critical infrastructure sites. KIWA Certification KGN Pillinger is the only UK company holding KIWA certification for both: Above-ground AV and EV variable speed booster sets. Below-ground UPOD Underground Plant Room. This dual certification underscores our commitment to meeting the highest industry standards for quality, compliance, and energy efficiency. To discuss your specific project requirements, contact our engineering team: 📞 0208 681 0097 | 📧 sales@kgnpillinger.com | 🌐 www.kgnpillinger.com

Creating solutions to safety and access challenges across the water industry. Since 2010, KG Site Services (KGSS) has been working with clients on a variety of innovative GRP engineering projects. Our activities include the design, fabrication & installation of bespoke GRP access solutions across a variety of industries, wherever light weight, corrosion/chemical resistant, flexible & maintenance-free structures are required. At KGSS, each installation is uniquely tailored to the client’s individual design criteria, whilst complying with all the relevant British Standards and client specifications. GRP is weight-for-weight stronger than steel, but light enough to be transported & assembled almost anywhere. It also has no scrap value, making it perfect for access solutions in locations where steel may be vulnerable to theft. We can create solutions to almost any access or safety challenge, whether it be the water Industry, chemical treatment areas, high-voltage situations or general corrosive environments, such as waste treatment or marine applications. Historically, GRP was used where steel could not be, but given the recent steel price volatility, low carbon footprint of GRP manufacture & transportation, stable costs, low maintenance, quick design/fabrication, strength-to-weight ratio & anti-slip properties, GRP can be seen as a direct competitor for steel in almost every situation.

As pioneering recruitment specialists, we’re picky with our projects. Whether it’s transport or infrastructure, we’ll only get excited if it’s transformational or innovative. We’re different because we truly want to make a difference by laying the foundations of the future. For us, it’s not about chasing, it’s about building relationships, being genuine and bringing value to our clients. We’re not headhunters or cold-callers, we’re networkers with an outreach that spans the globe, capturing professional, passionate people. Over two decades of experience in the industry gives us a past which means you can trust us with your future. We’re a tight-knit team who know exactly how to match personalities with the right opportunities. So, if you’re looking for the next big thing, have a chat with us today and we’ll guide you in the right direction. Think bigger. Together, we can Pave the way for a better tomorrow.

Started in 1955, KEE design, manufacture, supply, install, commission and service off mains drainage products, including pumps and pumping equipment, septic tanks and sewage treatment plant products. KEE also offer full evaluation and design through their nationwide servicing team, offering fully integrated plant operation, an out-of-hours call centre, treatment plant refurbishment, upgrades and plant hire. KEE’s expertise in design, manufacture, servicing, refurbishment, maintenance and operation of equipment for all types of wastewater treatment plants is backed by over 65 years of experience and over 350,000 installations worldwide. KEE provide quality engineered wastewater treatment solutions priced to offer value for money. Continuing investment in R&D ensures that the products and services supplied by KEE incorporate the latest technology to protect the environment. TREATMENT SOLUTIONS & SERVICES Rotating Biological Contactor (RBC) Wastewater Treatment Systems KEE NuDisc® & NuDisc-R® single piece packaged RBC treatment plants capable of treating populations up to 1,000 in a single packaged plant. Modular packaged DC/DN RBC treatment systems. Large diameter RBCs for site erection. Submerged Aerated Filters Modular packaged and single piece KEE NuFlow treatment systems for domestic applications up to 50 PE. Activated Sludge Systems Extended aeration (EA), sequencing batch reactors (SBR) and oxidation ditch. Anaerobic Reactor Industrial wastewater treatment. Settlement Tanks and Packaged Pumping Stations Primary or final settlement tanks. Dispersed Air Flotation Systems (DAF) KEE Microfloat® Fine Bubble Aeration Systems KEE Aspirator Aerators. KEE Triton Aerator/Mixer. The Biological Solution to Fat, Oil and Grease KEE Bio-Guard – The Grease Digester. Parts and Service Service, Maintenance and Operation. Replacement Parts and Associated Products. Plant Hire. Emergency Service KEE Emergency Call Centre for Managed Contracts.

SHORING & TEMPORARY WORKS SPECIALISTS. At National Trench Safety (NTS UK), we specialise in the hire and sale of all your trench support and excavation requirements. We pride ourselves on having unique solutions from simple to complex projects. We are dedicated to bringing both standard and bespoke solutions to the civil engineering, infrastructure and construction sectors. NTS UK are proud of their reputation for providing the highest quality products, the most complete hire fleet mix and unparalleled levels of service. With hundreds of years of combined industry experience, we have assembled one of the most experienced groups of hire professionals in the country. Our mission statement is simple, “our customers get what they want when they want it.” All of us at NTS UK believe our job is to ensure our customers’ complete satisfaction and we promise to diligently work to build and keep your trust and confidence. As well as a comprehensive stock of trench boxes, trench sheets and hydraulic bracing products, we are also able to offer the UK our unique (SBH) Slide Rail shoring system. DEDICATED TEMPORARY WORKS SUPPORT: INDUSTRY SPECIALISTS WITH UNRIVALLED KNOWLEDGE AND EXPERIENCE NTS UK is happy to provide you with specialist design support for all your shoring requirements to ensure your project is performed safely and to programme. Our experienced temporary works engineers provide a comprehensive design service to complement our suite of hire and sale products. Using the latest software, your engineered solution is compliant with the current industry standards and recommended guidance. Our engineering team are happy to provide on site support for all your project needs and will endeavour to exceed your expectations when it comes to both the solution and service provided.

At Industrial Pipework Services, we provide bespoke engineering services. With over 25 years’ experience IPS can offer complete mechanical engineering solutions including design, manufacture & installation services. Our experienced workforce are trained to the highest standards. IPS is situated within easy access to the M4 corridor approximately 30 minutes North of Cardiff. The company embraces innovative thinking while utilising the latest technology. IPS operating base comprises of 30,000 square foot of workshops, offices and assembly areas.  The Workshops are fully segregated for the manufacture of both carbon steel and stainless-steel products and are serviced by dedicated overhead gantry cranes. With over two decades of engineering experience the company strives to combine first class engineering and design to deliver the high quality that is required.  The Company maintains a proactive approach, working closely with our Clients to achieve our collective aims for each scheme. This ambition is underpinned by an uncompromising commitment to attain the highest standards of health, safety and environmental care. IPS provides continued excellence in design, manufacturing and installation gained from many years experience within the industry. Our In-House design capability allows the company to provide a full engineering design service using the latest Auto CAD software packages. IPS offers a design service for both pipework and steelwork systems from proposal drawings to the production of as built drawings. IPS Design Office provides all relevant AutoCAD drawings for steelwork and pipework, Isometric drawings for fabrication, general layout drawings for plant and equipment and As Built drawings. Structural steelwork calculations and flow characteristics are also provided as required. IPS offer a full 3D surveying services and production of cloud point data for project modelling. IPS operates primarily within the Water Industry and provides services for both clean water and sewage. IPS is a Tier One Mechanical Engineering Specialists Provider to Dŵr Cymru Welsh Water and the Strategic Alliance. IPS operate nationally and have delivered projects throughout the UK for many Water Utility companies including Anglian Water, Thames Water and Bristol Water. Continual improvement into our infrastructure and the development of new IT systems has brought us to a level consistent with the requirements of our clients. IPS offers a complete project management service, including operation of Principal Contractor role as well as delivering turnkey projects. Experience gained in the water industry has enabled us to manage the competing demands of cost, quality and safety for all our projects.

IIES (Northern) Ltd design, manufacture, install and commission chemical dosing systems in the water industry. IIES (Northern) was established in 1985 as an ICA, electrical and mechanical engineering company generally serving the water industry as a specialist chemical dosing provider. Since then we have developed into a multi-disciplined project engineering company involved in all aspects of engineering with the majority of our business still water related.  The company has been engaged and responsible for successful delivery of over 1800 projects in our markets. IIES has a formidable record of completing outstanding projects in the water treatment industry for over 40 years which support strict environment and regulatory compliance requirements, all backed up with management systems accreditation in ISO:9001, ISO:14001 and ISO:45001.  We are also certified on Achilles UVDB, Construction Line, ECA and are an approved contractor on NICEIC. Our core capability encompasses the following: CHEMICAL DOSING & TECHNICAL CONSULTANCY Site surveys 3D scanning available Process investigation Process recommendations Compliance with standards & specifications MANUFACTURE & INSTALLATION Plastic fabrication Plastic cutting Plastic welding Chemical dosing systems Chemical dosing rigs Bunds/drip trays Kiosks & enclosures Electrical installation NICEIC approved contractor Control & instrumentation cabling Pipework installation Fusion welding Delivery and offloading Site installation MEICA DESIGN Mechanical Process instrumentation & piping diagram Process calculations Full site general arrangements Equipment general arrangements Schedules and standards Full operation & maintenance manuals Electrical Process and systems control philosophies Cable block diagrams Schedules Electrical installation to BS7671 Test and inspection to BS7671 Electrical certification NICEIC approved Member of the ECA Control Panel design FDS Panel schematics System Integration PLC software HMI software SCADA integration Telemetry integration COMMISSIONING & SITE PROCESS SET-UP System setup Pressure testing Electrical installation testing Electrical certification (NICEIC) Servicing & maintenance Telemetry & SCADA OTHER SPECIALIST AREAS Control panel specification P & ID development Front end design & feasibility Capital/revenue budget costing Equipment specifications Detailed design & construction packages Project management Operating & maintenance documents Principal contractor Offsite testing Development of plant layouts Process & equipment specifications From initial client briefing a basis of design, including site surveys as necessary, will be carefully prepared and reviewed and will be developed further through detailed specifications and arrangement drawings. Our experienced engineers can provide comprehensive installation design for a variety of process plant and equipment, handling hazardous bulk chemicals in liquid, gaseous or solid form and in extreme conditions. Technical review and support will be provided to the client throughout the development cycle.

Hewitech UK Ltd operate in the Stormwater, Wastewater and Cooling Towers markets in the UK Hewitech  design, manufacture and supply a comprehensive range of products for use in the wastewater, stormwater retention and infiltration, and cooling tower industries. Our structured media filters for biological wastewater treatment applications are suitable for both municipal and industrial waste and potable water, with our products being used for: BOD treatment and nitrification in trickling filters (NTF) Submerged aerated filters (SAF) Biologically activated fixed film filters (BAFF) Primary sedimentation through lamella, in new and existing applications. Hewitech’s SuDS systems for stormwater retention and infiltration are the strongest available in the stormwater market, proven by rigorously testing for long term performance. While our comprehensive range of plastic media fill, air louvres and drift eliminators have the high module strength, thermal efficiency, and excellent material temperature performance to meet all cooling tower applications. Our product range includes: HewiFILL HewiPIER HewiTUBE Variobox Hewitech work closely with consultants, designers, architects and engineers to ensure smooth design and install on all projects.

Glanua is an industry leader in providing innovative and sustainable engineering solutions to design, build and operate critical water and wastewater infrastructure across Ireland and the UK. Glanua is passionate about solving today’s environmental challenges and delivering a decarbonised and sustainable world. At Glanua, we design, build, operate, and maintain innovative water and wastewater solutions that protect the environment and support the people who depend on them. Sustainability is at our core — it’s why we innovate, how we work and the future we’re building. We’re reimagining how the world treats water, using cutting-edge technology, smart design and fresh thinking to deliver cleaner, greener results for both industry and the public sector. With global ambitions and a track record of turning ideas into reality, we’re on an exciting journey of growth and impact. Glanua are a partner to major water utilities in Ireland and the UK, including Uisce Éireann (formally Irish Water), Thames Water, Yorkshire Water, Affinity Water and Northern Ireland Water. In the industrial sector, their clients include prominent names such as ABP, Glanbia, Kerry Group, and other key players in the food and beverage, pharmaceutical, and distillery industries. Core Values Glanua lives by our core values, including Safety and Well-being, Innovation, Integrity, Collaboration, Courage, Agility, Accountability, Diversity, and Inclusion. These values guide our actions and decisions, ensuring that we uphold the highest standards in everything we do. Our talented team comprises over 500 professionals across Ireland and the UK. Our UK office is headquartered in Hertfordshire and we also have offices in Reading, Sheffield, Northern Ireland, Galway and a manufacturing facility in Navan, Co Meath. Sustainability At Glanua, we understand the vital role we play in ensuring the delivery of safe and high-quality drinking water, as well as the proper treatment of wastewater before it is discharged into the environment. Committed to building today without compromising the environment for future generations, sustainability lies at the core of what we do. To strengthen our commitment, we have partnered with Earthshine, a leading sustainability consultant to develop our sustainability strategy that aligns with our values and ensures that every engineering solution we deliver contributes to a greener and more sustainable world. Future growth Glanua is on a growth trajectory, with ambitious plans to reach €400 million in the next five years. As we continue to expand our capabilities and service offerings, we remain committed to being at the forefront of sustainable engineering solutions, driving positive change in the water and wastewater infrastructure landscape in Ireland, UK, and internationally. Our growth is evident in the recent expansion of our team by over 150 people in 2023, bringing our total workforce to over 500 people. In 2024, we acquired O&M specialist company, Aqua Operations and in 2025, we acquired Anaerobic Digestion specialist company, Marches Biogas building a complete solutions provider in Water, Wastewater and Bioresources.

Morgan Sindall is a UK construction, infrastructure and design business with a network of local offices. The company works for private and public sector customers on projects from £50,000 to over £500 million. Activities range from small works and repair and maintenance, to the design and delivery of complex construction and engineering projects where it is able to provide specialist design, tunnelling, utilities, building, civil engineering and mechanical and electrical services. The company operates across the commercial, defence, education, energy, healthcare, industrial, leisure, retail, transport, waste and water sectors. The company is a leading UK construction and regeneration group with revenue of over £2 billion and which operates through five divisions of construction and infrastructure, affordable housing, fit out, urban regeneration and investments.

Gurney Environmental is a well established provider of systems and technologies used in the treatment of water and wastewater. From water supply to water re-use, we have designed and developed innovative, low cost and sustainable systems for the water and wastewater industries. Low CAPEX plus low OPEX equals low TOTEX. True sustainability is the benchmark for success with Gurney. We offer unique water and wastewater treatment systems, equipment and design including zero-to-low energy www and reservoir destratification systems. Our experience and knowledge of the water and wastewater treatment industries has successfully helped a wide variety of clients including major landowners (such as the Crown Estate) and many of the UK’s water utility companies. Our systems are today recognised internationally with a growing number of foreign municipals. Gurney has a total commitment to quality. Our systems and solutions represent the finest in long-term value, which is why we place such a strong emphasis on equipment with sturdy construction and fewer moving parts. Our commitment to a low total life cost is a key part of a commitment to quality.

A specialist engineering company with a global customer base. Greenbank provides a wide range of products and services to companies operating across a number of industries and is now establishing itself in the clean and wastewater sector. For many years the company has utilised the unique properties of volcanic basalt for lining products used in heavy industries such as power generation and minerals extraction. In partnership with Czech firm Eutit, the company has also been pioneering the use of basalt in the renovation and restoration of sewer systems in central European following a series of successful projects in Prague. As a result of devastating floods, the city’s sewer system was extensively rebuilt and upgraded with basalt being used in a number of key locations to provide a new level of security to the system. More than a decade on, the new system continues to perform well and has set a standard that’s now been followed in other European cities. Well suited for the most demanding of applications, thanks to the partnership between Greenbank and Eutit, a wide range of basalt solutions are now available in the UK market. These include products and systems that bring a wide range of benefits to the industry, including: Basalt tiles that can also be used to line existing brickwork, a more cost-effective solution than full replacement, and their reduced drag co-efficient means improved flow – in effect a smaller-diameter pipe or tunnel lined with basalt can carry a higher volume of water than a larger one with traditional brick surfaces. The effective life expectancy of basalt-lined sewer systems is between 100 and 200 years, thanks to their excellent resistance to abrasion and chemical damage – as well as the rigours of high-pressure water jetting that’s often used to clear unwanted blockages. For larger round or ovoid systems, basalt can be used in the lower sections to deal with the wear and tear with concrete upper sections to provide optimum life performance. Alternatively, steel pipes lined with basalt can be produced up to 3000mm diameter producing a lighter therefore lower cost installation option to thick wall concrete. Ease of installation and reduced maintenance costs make basalt ideal for bottom gutters, branch pipes and tubes and slip-resistant elements for walkways, and Greenbank can also supply bespoke-shaped tiles to meet the unique requirements of individual clients. With manufacturing facilities in Derbyshire and Nottinghamshire, supported by the additional capacity and expertise provided by the latest addition to the group, Franklyn Yates Engineering, Greenbank is well placed to react quickly and efficiently to the needs of new and existing clients.

GoFlo screens are designed and manufactured in Stroud, Gloucestershire, UK, meaning our expertise and support is never far away.  The screens are all stainless-steel structural construction (including the mesh belt), with self-lubricating polymer bearings on the driveshafts, UHMW rubbing strips for the mesh belt and Acetal drive sprockets.  All of the polymer materials have been tested to ensure Regulation 31 compliance for the overall GoFlo system. Our screens can be supplied with a bar-spacing down to 1.8 mm to ensure compliance with the Eel Regulations or strictest fisheries regulations.  They are self-cleaning and incorporate debris flights to carry the debris up the screen, an inside-outwards high pressure debris spray boom and integrated debris trough and return channel.  Ourscreens use an innovative mounting system, enabling them to be quickly lifted in and out, and on re-installation they are guided precisely into position without the need for divers, even into flooded intakes.  We can supply just the screens, or a complete system including debris trough and return channel and walkways. We design our systems in 3D and work closely with our clients to design an optimised overall solution to meet their requirements.  Water Utility clients include Southern Water, Southwest Water, Wessex Water and Welsh Water, along with various hydropower operators who use our screens.  We are always keen to help solve your problems; recent innovations include an ‘intake box’ system that allowed our screens to be installed by divers without having to de-water a 4.5 metre deep live intake that could not be taken offline for more than 8 hours, and a recent slide in/slide out mounting system that allowed our screens to be installed underneath live 11 kV powerlines – in both cases our innovations saved the client substantial amounts of money. If you have a new intake project or have to upgrade an existing intake to be Eel Regs or fisheries compliant, we are keen to find out more.  We are happy to provide a budget proposal and initial design/3D model at no cost, so please get in touch.

Grant Plant Hire Ltd (GPHL) is based near Penrith in the north of England close to the M6 and A66. GPHL has the highest of standards when it comes to the delivery of construction projects throughout Scotland and Northern England. The time-served expertise within our team gives us the ability to not only focus on the critical path but all the ancillary aspects of the job. We take pride in offering a partnered approach with our clients in order to achieve the best outcome with the minimum of delay. As well as traditional civil engineering works, GPHL specialisms include: Steel piled cofferdams In-river working Pipeline/trunk main installation Deep drainage Hydro electric schemes Tidal works Our latest projects Water mains: Currently we are engaged on Northumbrian Water’s County Durham and Tees Valley Pipeline, it is designed to improve water quality and increase resilience and operability within the Tees Network. The pipeline will replace existing portable water mains across the North East of England. GPHL are installing over 11 km of new steel welded main, completing works at the Whorley Strategic Connection including three number cast in situ underground tanks and tying in both the new inlet and twin outlet pipework to the existing reservoir. Hydro electric: GPHL have recently completed all the civil engineering works on a pioneering new type of hydro energy generation scheme at Whiteadder Reservoir, East Lothian for Scottish Water as part of its work to reduce carbon emissions. The hydro energy generation scheme is fed by a siphon and is believed to be the first of its type in Europe.  The scheme will enable Scottish Water to generate green energy while accurately controlling the level of the reservoir during seasonal fluctuations in weather. The siphon technology in the project allows Scottish Water to draw water up through the intake and over the top of the dam which then runs down through the siphon, through the hydro turbine, and back to the natural environment. Flood alleviation: GPHL are also currently subcontracted to Volker Stevin on the Flood Risk management Scheme in Appleby, for the Environment Agency. The project involves the installation of a new flood relief pumping station and installation of a new stretch of culvert diverting an existing culvert to the pumping station. A new rising main will outfall into the River Eden. The scheme is known as Appleby Town Centre Flood Risk Management Scheme (FRMS) and aims to reduce flooding caused by surcharging of the Doomgate Culvert which is designated as a main river and is a tributary of the River Eden.

Brentwood Europe Ltd, based in the United Kingdom, is a prominent equipment manufacturer specializing in innovative solutions for various industries. With a strong presence in Europe, the company is known for its advanced manufacturing capabilities and commitment to quality.

Your experts in temporary works - For over 60 years, Mabey Hire have been using its skills and experience to help customers deliver essential water and wastewater infrastructure projects. We’ve played our part in delivering new infrastructure projects, new rural treatment services and in maintaining our rivers and canals. So, whether it’s a planned infrastructure spend on improving our water utilities or managing our flood and coastal defences and our network of rivers and canals, we can deliver the right solution. We can help at every stage of your project, from early stage planning, design and tender submission through to supply and, if you need it, installation. We have the widest range of temporary works equipment, covering groundworks support, propping and jacking, temporary bridging and access, formwork, falsework and monitoring.

A Graduate Production Engineer and experienced Management Consultant, John Alexander established Geosynthetic Technology Ltd over 30 years ago. With previous experience in the Geomembrane Industry and having been the Managing Director of the specialists fabricator, Airborne Industries Ltd, he has truly been the forefront in the development of welded plastic linings (Geomembranes) - both in the UK and abroad. John has been instrumental in leading employees to undertake Geomembrane installations throughout the world including Australia, Hong Kong and the U.S.A Reference projects handled include the Worlds largest landfill (Saudia Arabia) to Europe’s largest lined lake (Wakefield, UK) and the world’s largest lagoon lining (Kazakhstan). With the establishment of and development of specialist welding machinery, the company were pioneers of Geomembrane usage within the Landfill Sector and Water Engineering Industries. John still works in the Company on a part time basis. Following a Surveying Degree, Duncan Alexander joined his father in the summer of 1990 to work with him and Paul Gordon (Contracts Manager) to develop the sales and Marketing of the Company (Duncan is now Managing Director of Geosynthetic Technology). In the intervening period, Geosynthetic Technology has become recognised as the Market Leader in the Geomembrane business, for both site installed and prefabricated products and is widely respected for the quality and skills of its staff. A good reliable measure of a company’s success is staff retention. On this measure, the Company is second to none in developing and working with all staff to provide a thriving environment to benefit the company’s numerous and diverse customers.