Water Treatment Solution Providers

Solid Handling Solutions - Screening, Grit and Sludge Equipment

Established for over 20 years, the Siltbuster Limited provides rapidly deployable, “modular off the shelf” water treatment solutions to the construction, industrial and municipal markets, with a client base ranging from the world’s most recognisable multi-national corporations to small enterprises. Siltbuster provides a wide range of water and wastewater treatment equipment for the industrial and municipal markets, including: Packaged lamella dissolved air flotation (DAF) units. Lamella clarifiers. Packaged biological treatment systems. Oil/water separators. Pipe flocculators. Reaction tanks. Containerised dosing systems. In the UK, Siltbuster has pioneered the concept of offering this plant through our extensive hire fleet. Approximately 20 major contracts and circa 50 smaller projects are undertaken each year for a diverse range of clients, many of which are some of the UK’s best-known companies. In addition to the industrial/municipal sector, Siltbuster has undertaken a number of mine water treatment projects in many countries, for example, the UK, Ireland, Greece, France, USA, Canada, Australia and Slovakia. The Siltbuster team pride themselves in their ability to react rapidly and in compliance with the project constraints, delivering mobile or permanent solutions tailored to meet your individual needs.

Xypex is a non-toxic chemical treatment for the waterproofing and protection of concrete. Its primary and most distinguishing performance feature is its unique ability to generate a non-soluble crystalline formation deep within the pores and capillary tracts of the concrete; a crystalline structure that permanently seals the concrete against the penetration of water and other liquids from any direction. Xypex Crystalline Technology was developed in Vancouver in 1969. Since then, in both hemispheres, in every climatic challenge, and in widely varying construction situations, the technology has been tested and proven. In more than 90 countries, the proprietary crystalline waterproofing products of Xypex Chemical Corporation are stocked, sold and supported by a worldwide network of distributors and licensees such as SMR Projects Ltd. It has been over 50 years since Xypex Chemical Corporation first coined the phrase “Concrete Waterproofing by Crystallization”, a statement and concept that represented a radical departure from traditional surface-reliant barrier products of the day. Pursuing an entirely new path, Xypex developed a unique technology that takes advantage of the natural and porous characteristics of concrete. With water as the catalyst, Xypex’s proprietary chemicals react with the natural by-products of cement hydration (calcium hydroxide, mineral salts, mineral oxides, and un-hydrated and partially hydrated cement particles), forming a non- soluble crystalline structure within the interconnected pores and other voids in concrete. In this way, the crystalline structure becomes a permanent, integral part of the concrete matrix itself, preventing the ingress of water and other liquids even under strong hydrostatic pressure, and providing protection against harsh, aggressive environments. Since the introduction of Xypex, tens of thousands of concrete structures around the world have been waterproofed and protected with this unique crystalline technology and, over the years, extensive research, testing and performance success have furthered the awareness, understanding and confidence in Xypex, earning both the technology and the company an enviable reputation as the world standard in crystalline waterproofing. Using the high-power imaging capability of a Scanning Electron Microscope (SEM), we display visual evidence that clearly differentiates Xypex from all other products in the waterproofing admixtures category. SEM is a technique whereby a precise photographic image of a microstructure is produced by scanning it with a focused beam of electrons. Extremely high degrees of magnification can be attained and, at x500 magnification, Xypex crystalline formations at work can be seen. Our SEM images show conclusively that the many and varied Xypex non- soluble crystalline structures formed within the concrete are unique, and truly have “… NO EQUAL.”

From industrial water tanks to turnkey odour control systems, we are the only UK manufacturers to offer 3 axis helical filament winding, providing high quality plastic storage tanks to the water and waste, microelectronics, chemical, pharmaceutical, paper & pulp, food processing, drinks and brewery industries. We are a leading manufacturer in the UK and Ireland for chemical, liquid and drinking water storage tanks, bunded storage tanks, process vessels, pressure vessels and environmental systems. Flexible in our approach to business and providing strong technical support, we are dedicated to supplying our customers the high quality product and service that you would expect from a market leader in specialist tanks. We manufacture to design standards BS4994:1987 , BS EN ISO 12573 & DVS2205 using FDA, WRAS and DWI approved materials. Our extensive ‘in house’ capabilities include mechanical engineering design along with chemical process design these activities are supported by a CAD network operating with AutoCAD 2D & Solid Works 3D software, FEA & Laminate Theory Analysis offering clients a complete service. We are innovative and continue to advance using the latest technology and materials used within the industry and have installed a CNC router and laser machine to support business development. RANGE OF EQUIPMENT & SERVICES OFFERED Storage, mixing and process tanks/vessels. Ranging in capacities from 50 litres to 200,000 litres. Tanks are manufactured using a variety of thermoplastics and GRP materials to suit the particular application including HDPE, polypropylene, UPVC/GRP (Aqua Pure – WRAS approved), polypropylene/GRP. The majority of our products are ‘bespoke’ designed and manufactured to suit the clients specific application. Odour and chemical fume scrubbing towers. Our ‘bespoke’ design and manufacture odour or chemical fume abatement equipment to suit most environmental applications. Our site teams are fully trained and able to complete on site installation within Ireland & UK including offloading, positioning, bolting down, assembly of any ancillary access steelwork as well as thermoplastic pipework and ductwork installations.

Serimax offer full-service, automatic and manual pipeline welding with supporting comprehensive Welding Operations Services meeting diverse and stringent industry demands. We get the job done right first time. Highly Skilled, coded welders work with our automatic welding solutions. 200 dedicated manual welders and 62 international welding engineers currently on staff, backed up with a substantial database of independents and sub-contractors verified, assessed, and trained by Serimax prior to working on our projects. With a near-to-field local presence, Serimax have a truly global footprint, strategically aligned with our customers supply-chain needs.

SEEPEX is a leading worldwide specialist in the design, manufacture and application of progressive cavity pumps, macerators and digital solutions which optimise uptime and reduce downtime to give an optimal TOTEX solution. Our products and expertise are applied in most applications in the wastewater industry wherever thin to highly viscous and high % DS media is conveyed. Each solution is custom-configured to suit our customers’ requirements. Pump Technology 4.0 SEEPEX Digital Solutions incorporating the Pump Monitor turn the progressive cavity pump into an intelligent field device, operating in a networked system of smart products, services and processes. SEEPEX cloud-based service provides online remote monitoring and management of the pumps and process. Data collection and advanced analytics enable process and pump optimisation and reduce inspection, downtime and operating costs, facilitating predictive maintenance and timely delivery of spare parts to improve overall equipment and plant efficiency. Unlocking the Power of Digital Our latest innovation, the most intelligent progressive cavity pump in the world, allows remote adjustment to maintain pump performance without onsite manual intervention. With SEEPEX unique SCT AutoAdjust technology, combined with our digital solutions, site visits for maintenance are eliminated and access to otherwise hard to reach pump installations can be carried out remotely. Energy Efficient Long Distance Pumping of Dewatered Sludge Our dewatered sludge handling solutions include Smart Air Injection (SAI) technology, an energy efficient system delivering energy savings of approximately 40% by combining a progressive cavity pump with pneumatic dense phase conveying to transport 14-40% DS sludge over long distances up to 1,000 meters. This alternative to conventional technologies has proven to significantly reduce operational (energy, spare parts and downtime) and total investment costs. Patented Solutions for Smart Maintenance. Fast and Simple. SEEPEX continues to extend its world class portfolio of maintain-in-place technologies for pumps with capacities up to 300m3/hr and 48 bar, able to handle flowable to highly viscous products with a high % DS content. The new patented BNM range has been designed to simplify customers’ maintenance and can reduce maintenance time by up to 80% with a significant reduction in related costs. SEEPEX latest ease of maintenance solution for big pumps complements our Smart Conveying Technology (SCT), launched in 2008 and still setting standards in the maintenance of smaller standard progressive cavity pumps, and Drive Joint Access (DJA) technology for open hopper pumps. All of these patented solutions increase uptime and plant availability.

Salix River & Wetland Services are bioengineering technical specialists, involved in the supply, contract and design elements of river, wetland and coastal projects. Salix has extensive experience working within all river types across the UK, providing innovative vegetated, sustainable solutions for soil erosion and wetland creation. SUPPLY Our in-house product range specifically developed for erosion control and habitat creation includes Coir Rolls, Coir Pallets, Rock Rolls, Rock Mattresses, Rock Bags and the world’s highest performing range of Composite Turf Reinforcement Mats – VMax C350 & C500. We also provide hydraulically applied solutions such as TerrAffix. We have the largest native wildflower and wetland plant nursery in the UK. Salix are the only company to manufacture coir rolls and pallets within the UK, providing a massive reduction in carbon. Salix rock products allow natural sediment accretion and vegetation establishment, unlike harder solutions such as rock armour or gabions. CONTRACTING Salix’s contracting division undertake works for local authorities, public bodies, utility companies, main contractors & private clients, having been involved in a diverse range of projects across the UK. Salix has unrivalled specialist equipment for fluvial environment, including a Mackenzie ‘Muck’ Spider excavator. The Spider has four independent legs, with the ability to access logistically challenging of sites. Salix also has long reach excavators, floating pontoons, hydroseeders and truxor available for a diverse range of specialist fluvial and intertidal activities.

Sewaco Ltd specializes in design, manufacture, supply and construction of purpose built plant and equipment for use in water supply systems and treatment of municipal sewage and industrial waste water. Our range of products includes: HYCOVER Static & Rotary distributor systems (from 5 l/s up to 980 l/s flow range) with optional auto cleanse and electro pneumatic belt drive mechanism, respectively. HYRATE Polytower biofilter systems using modular plastic media for: High Rate (BOD/COD reduction), upstream of existing treatment plant. Secondary ( BOD removal only or combined BOD removal/Nitrification). Tertiary Nitrification applications, downstream of existing secondary treatment processes. HYRATE Polytowers can easily incorporate natural ventilation or air extraction systems for odour control purposes, as required. Factory built timber support matrix for secondary modular plastic media support. Modular media installation and re-packing undertaken by our experienced site team.

M&J Drilling Services was founded in 1982 to offer specialist contracting services in the investigation and stabilisation of mine workings and mineshafts, concentrating its activities in the South Staffordshire Coalfield. It has grown steadily, investing heavily to provide state-of-the-art drilling rigs and associated equipment, and now operates nationally from its base in the West Midlands. The company focuses its operations on the development and delivery of geotechnical solutions to various ground problems. The main activities of the company are drilling (rotary and rotary percussive) and grouting, and the following list gives details of the various applications we undertake: Rotary investigation by open hole and core drilling techniques. Stabilisation of shallow mine workings (drilling and pressure grouting). Soil nails & ground anchors – to improve slope/ embankment stability. Other underground stabilisation work (e.g. cellars and former gas tank infilling). Mineshaft location and treatment. Void infilling (large mine workings). Sewer, tunnel and pipeline annulus grouting. Health & Safety The Company has always operated with great regard to the Health & Safety of its employees, particularly in view of the inherently hazardous working environment, the operation of powerful and potentially dangerous plant and of our intention to maintain long-term continuity of service in a stable workforce. Contract Record Customers range from householders requiring a couple of boreholes prior to building house extensions, through to national house builders, local authorities and major civil engineering contractors. The value of contracts can be £1500 up to £5 million and can last from a day to several years. Average turnover in recent years has been in excess of £7 Million per annum. The Company has always been proud of its commitment to quality and its reputation for professionalism in the industry. We gained accreditation to ISO 9001:2008 and to Constructionline in categories comprising: Site investigation. Anchors. Soil nails. Ground stabilisation. Deep grouting. We aim to develop strong relationships with both consultants and developers and are proud of the fact that over recent years, 85% of each year’s turnover has been with clients who we have worked with in previous years.

RammSanderson is one of the fastest growing multi-disciplinary consultancies in the UK. Already partnered with some of the largest water infrastructure companies in England, RammSanderson specialises in: Ecology Flood risk management Arboriculture Habitat management Providing a pragmatic and cost-effective approach to projects on either a site-specific or framework basis, RammSanderson is founded on the principles of customer service, technical excellence, and pragmatic solution-based consulting. The company was founded in 2014 by Oliver Ramm, Nick Sanderson and Anthony Mellor, since when it has grown from strength to strength, with a diversified client portfolio spanning across infrastructure, utilities, commercial and residential sectors. Initially focusing primarily on ecology, the company has grown to encompass a wide variety of environment-based disciplines. This approach has yielded a multitude of benefits, allowing each individual discipline to effortlessly draw knowledge from a wider set of specialists while also allowing seamless delivery and straightforward accountability on more complex multidisciplinary projects.

Roperhurst: a UK in-house designer, manufacturer and installer of fume and odour control treatment plant and equipment, chemical storage vessels, dosing and delivery systems. Since 1976 Roperhurst has worked with a range of customers, big and small, global and local, on specialist plastic and environmental engineering projects. Roperhurst is quality certified to ISO9001:2015, SSIP approved and a long-standing member of BESA. Fume/odour: Roperhurst delivers a comprehensive proven range of solutions including catalytic iron filters, carbon absorbers, bio-filters, bio-scrubbers, biogas and chemical scrubbers. Utilising either organic or synthetic media filled units, all designed and built at our UK manufacturing facility, and each offering a green, smart and simple-to-operate solution to your fume, odour and VOC problems. Chemical storage/dosing/delivery: Roperhurst offers bespoke tanks and vessels for the safe long-term storage of chemicals, each specifically matched to meet your individual needs. Additionally, we fabricate and install dosing cabinets and day tanks with dual containment delivery pipework, all designed to dispense chemicals safely to the point of consumption. Delivery ductwork: Plastic ductwork for dealing with fume/odours created by chemical, biological or radiological processes have a high level of inherent risk.  This means that you need assurance that the ductwork will be fabricated correctly and installed competently. The UK standard for fabrication and installation of plastic ductwork is DW154, published by BESA, the Building Engineering Services Association (formerly HVCA).  Roperhurst is a UK market leader in this field: Roperhurst’s founder, Graham Handley, chaired the HVCA committee that wrote the 1st edition of DW154 in 2000. Roperhurst continues to work closely with BESA to improve standards. Roperhurst, as a BESA plastic ductwork specialist, ensures that our manufacturing and site work is regularly audited by external specialists to ensure that our work meets all current standards. Roperhurst is one of the few plastic ductwork specialists with its own in-house fibreglass division and specialist installation and testing teams. At Roperhurst we don’t need to rely on sub-contractors to produce elements of the project, which can be a cause of quality and compliance issues. Our plastics fabricator welders are time served and certified to BS EN 13067, and our laminators have been assessed under BS 4994.

Rotork is a market-leading global provider of mission-critical intelligent flow control solutions for the industrial actuation and flow control markets. We operate across three divisions: oil and gas, water and power, and chemical, process and industrial (CPI). We are a global company with 3,300 employees serving 170 countries.

At Pump Supplies, our mission is simple. We aim to lead the way in both innovative pump solutions and customer satisfaction. We believe that our success is driven by the success of our customers. That’s why we’re dedicated to delivering services that not only meet but exceed expectations in functionality, durability, and cost-efficiency. Products We offer a comprehensive range of submersible pumps, including drainage, sewage, and slurry pumps. Each product is selected for its quality and performance, ensuring you receive the best possible equipment for your specific needs. Services Beyond our extensive product range, we provide full-service solutions encompassing installation, maintenance, and repair. Our team of experts is equipped with the knowledge and tools to ensure your pumping systems operate smoothly and reliably. Custom solutions Understanding that each setting has its own unique challenges, we specialise in creating custom pump setups tailored to your specific operational requirements. Our engineers work closely with you to design systems that not only perform well but also contribute to your operational efficiency. We will also work alongside you when it comes to the monitoring and control of your pumping equipment

Established in 1974, we are one of the UK’s leading Sheet and Bored Piling contractors. We specialise in the design and installation of retaining wall solutions for challenging environments — including rivers, canals, locks, harbours, docks, marinas, reservoirs, and tidal/inter-tidal zones — as well as land-based infrastructure. Our bespoke piling solutions support a wide range of water infrastructure and flood defence projects across the UK and beyond. Delivering Intelligent, Integrated Piling Solutions Ivor King has built its reputation as a trusted name in sheet piling, consistently delivering reliable solutions for retaining structures in even the most complex environments. While sheet piling remains at the heart of our business, we also offer integrated solutions that combine CFA (Continuous Flight Auger) and bored piling techniques, allowing us to provide a flexible, multi-disciplined approach that brings real value to our customers — particularly where projects demand a tailored, hybrid piling solution. Working across tidal and inter-tidal zones, on or adjacent to rivers, canals, docks, locks, reservoirs, and marinas, our piling solutions are designed with the specific challenges of water infrastructure in mind. From flood defence systems to water utility assets and quay wall stabilisation, we understand the complexities of access, ground conditions, environmental sensitivity, and structural integrity in water-based settings. Powered by People, Backed by First-Class Facilities At the core of Ivor King is a highly skilled team — some of the industry’s most experienced engineers, designers, and site operatives — all committed to delivering excellence on every project. We’re supported by our state-of-the-art central hub, which houses a dedicated training centre, comprehensive maintenance workshop and fabrication facilities, and a fully integrated in-house transport and logistics department, ensuring we can respond swiftly and efficiently to customer needs nationwide. Experience, Values and Investment That Make a Difference Our strength lies in the breadth and depth of our knowledge, developed over five decades and grounded in strong traditional family values. This ethos drives our commitment to quality, innovation, and a customer-first approach, ensuring we not only meet but consistently exceed expectations. We aim to build long-term relationships with our clients by offering smart solutions and outstanding service. We’re proud to work across a wide range of sectors — from major civil infrastructure and water utilities to road, rail, and environmental protection and flood alleviation schemes — contributing to vital projects across the UK. Our client portfolio includes leading principal contractors and government agencies, such as the Environment Agency, Canal & River Trust, and Cyfoeth Naturiol Cymru (Natural Resources Wales), who trust us to deliver safe, cost-effective, and technically advanced piling solutions. Innovative Equipment and Specialist Techniques With over £15 million invested in the last five years in specialist plant, equipment, and transport infrastructure, we’re fully equipped to meet the most demanding project requirements. Our vibration-free and low-impact piling solutions are particularly well-suited to sensitive environments, including urban locations, heritage sites, and over-water structures. We are also proud to lead the field in silent piling solutions, offering specialist equipment such as the Giken Supercrush system — ideal for hard ground, including rock — and the Giken GRB System, which enables ‘footprint-free’ installations from the top of previously driven piles. These advanced vibration-free techniques are especially effective on sloping ground, restricted sites, and sensitive waterway environments where conventional methods may not be feasible. Please head to our website to look at our Case Studies for specific industry examples of the solutions we’ve created to gain more insight into the expertise and quality of work you can expect from Ivor King. Whatever your piling project, we’re your people.

With over 30 years of experience delivering expertise in the industry, JK Fabrications Ltd has become one of the front runners and will keep challenging ourselves and others to improve our Environment as we believe that; Our Environment, is our Future. At JK Fabrications, we are an engineering company that takes pride in our family roots, with an aim to continue to successfully grow our business. Our company values are incorporated into everything we carry out and we seek to work with like-minded companies. Established in 1998, JK Fabrications specialises in efficent, effective, and environmentally sensitive solutions to the Water Treatment, Waste Water, Waste to Energy, and Pharmaceuticals Industry. With over 30 years of experience delivering expertise in the industry, JK Fabrications has become one of the front runners and will keep challenging ourselves and others to improve our Environment as we believe that ‘Our Environment, is our Future’. With the ease of access to Northern Ireland’s principal motorway network and equal distance between both Belfast Airports and Dublin Airport, JK Fabrications’ 50,000 Sq/ft premises in Newry are the perfect location to produce and deliver your project. Design We have a fully equipped in-house design team with over 65 years of combined technical, manufacturing, and sector-specific experience, that are highly skilled and trained using the very latest design software. Manufacture We have built our reputation by producing specialised products for the waste-to-energy, wastewater, water treatment, and pharmaceutical industries. Our experienced welders and fabricators along with our state-of-the-art machinery make sure that each project is carried out to a high standard. Install We have an experienced installation team with a dedicated core team of engineers, mechanical fitters, and coded welders who have over 30 years of experience in the supply and installation of our fabricated products for a wide range of projects throughout the UK and Ireland. Commission Our experienced commissioning engineers will attend the site to oversee the installation of systems, plants, and equipment. They will commission, test, and optimise the equipment as well as provide the operators with operation and maintenance manuals. Products include: Stainless Steel Pipework | Stainless Steel Vessels (inc Pressure Vessels) | Mild Steel Pipework | Lamellas | Picket Fence Thickeners | Rectangular Bridge Scrapers | Half Bridge Scrapers | Conical Settlement Tanks

Since 2004, Polypipe has been successfully manufacturing engineered Sustainable Urban Drainage Systems (SuDS) to support the construction industry at every stage of its growth. With continuous research and development, Polypipe have become the market leaders in water management solutions, designing drainage systems that effectively meet the challenges of today’s construction sites. We develop site specific engineered drainage solutions that fulfil large scale civil engineering and infrastructure, commercial and residential projects, working closely with contractors, consultants, engineers and planners. The increase in climate change and urbanisation has pushed them to continually develop through innovation. We engineer specific systems that not only make space for water but we also develop systems that provide multifunctional benefits that create and sustain Green Infrastructure. With the shift towards creating resilient cities in the UK and around the world; green walls, Blue-Green roofs, swales and rain gardens that intercept water run-off are working in conjunctions with engineered solutions, such as permeable pavements and mass attenuation systems. Source control is being adopted more often on site where rainwater is intercepted on rooftops and on tall buildings with dense urban environments, all helping to mitigate the impact of flooding whilst reinforcing a positive outcome for a growing population, providing enjoyable places to live. Today we offer the widest choice of water management, surface water drainage, sewer and cable protection systems. We are evolving to meet the challenges through clever design and making space for water to capture, store and re-use.

Pipelife is an established and well respected supplier of polyethylene pipes and recognised as a global leader in the supply of long length extruded solid wall PE pipes. Our long length extruded pipes are produced by Pipelife Norge in Norway. The large, high-quality pipes are extruded at our Stathelle plant using premium PE100 resins and strict factory quality controls. Each pipe is made to order through a seamless, continuous extrusion process that eliminates welds and extends directly from the factory into the fjord. From there, the pipes are transported by tugboat straight to their destination, removing the need for land storage or extensive working areas. This efficient production and delivery method not only ensures exceptional durability and precision but also reduces handling and lowers the overall carbon footprint, making Pipelife a reliable partner for major infrastructure projects worldwide. Located on the shore of a sheltered fjord, Pipelife’s Stathelle plant offers the ideal setting for producing long-length pipes. Its coastal position allows continuous production in a clean, controlled environment with direct access to the sea, meaning pipe lengths are limited only by the fjord’s size and the pipe’s diameter. The facility is equipped with extensive storage areas on both land and water, along with a dedicated wharf for easy loading by ocean-going tugs. Supported by Norway’s reliable infrastructure, the plant benefits from a stable energy supply and consistent access to essential raw materials. Inside, a state-of-the-art production line, enhanced with specialized modifications, ensures the highest manufacturing standards and delivers unique advantages in product quality and performance. Pipelife’s long-length, large-diameter pipes are designed for a wide range of demanding applications, including: Wastewater sea outfalls and diffusers Desalination and power plant intakes and outfalls Cable landfalls Cable protection systems Horizontal directional drilling (HDD) liner ducts Fish return lines

As pioneering recruitment specialists, we’re picky with our projects. Whether it’s transport or infrastructure, we’ll only get excited if it’s transformational or innovative. We’re different because we truly want to make a difference by laying the foundations of the future. For us, it’s not about chasing, it’s about building relationships, being genuine and bringing value to our clients. We’re not headhunters or cold-callers, we’re networkers with an outreach that spans the globe, capturing professional, passionate people. Over two decades of experience in the industry gives us a past which means you can trust us with your future. We’re a tight-knit team who know exactly how to match personalities with the right opportunities. So, if you’re looking for the next big thing, have a chat with us today and we’ll guide you in the right direction. Think bigger. Together, we can Pave the way for a better tomorrow.

RSE is a leading UK-based provider of innovative water technology solutions, specializing in modular and integrated systems for water purification, wastewater treatment, and industrial water management. With a focus on sustainability and efficiency, RSE delivers industry-shifting technologies that enhance quality, reduce costs, and support environmental goals.

PBA Applied Ecology Ltd has unparalleled experience in the environmental planning and practical management of water engineering schemes and in-channel river works. We have earned an outstanding reputation for delivering projects on time, on budget and to the satisfaction of all stakeholders. Our strength is Applied Ecology – the practical and innovative application of life sciences to real life situations. We assist with the planning and delivery of a range of water engineering schemes including reservoir engineering, catchment restoration and wetland creation, and are acknowledged for the successful completion of large scale projects on highly sensitive sites (SSSI, SAC). PBA offer a full range of services including baseline ecological survey, planning/consents, method statements, fish rescue, surface water management, water quality monitoring & control, invasive non-native species identification and control, biological monitoring, restoration design and delivery. Where appropriate, we apply protocols that are fully compliant with UK-wide delivery of Water Framework Directive. A frequent cause of stress amongst project teams is ensuring the maintenance of ecologically acceptable flow and water quality, and that impact on fish and other biota are minimised. PBA assist you in managing these aspects of water engineering projects. At the outset of each project, we can assist in agreeing achievable and ecologically acceptable water quality standards with regulators. Our staff then monitor, advise on containment works, and liaise with regulators throughout. PBA’s working methods are designed towards most efficient project delivery with minimum environmental impact. Engaging our specialist knowledge at an early stage of project design can help to ensure that the project is completed on time, on budget, and with enhanced conservation benefits. PBA deploy structured teams of professionals, to robustly deal with every challenge, from project conception, to aftercare management. And most importantly, we do this with safety as our No.1 priority. All of our staff are fully trained and equipped, and also attend PBA’s own water safety training/first aid course every year.