Water treatment solution providers, shortlisted.

Founded in 1987 Alpha Plus Limited have been providing quality pipework, fabrication and installation of pipework, structures and mechanical plant for the utility, waste management, industrial / commercial and manufacturing sectors. Alpha Plus is committed to providing clients with innovative, cost effective, high quality solutions. We work closely with clients providing design, fabrication and installation to a high quality using approved standards and up to date technologies. We provide a wide range of services with a wealth of experience in the following areas: Pipework. Installation. Structural. Design and project management. Site Maintenance. Alpha Plus has successfully completed numerous contracts, varying in size from £10,000 to £3M+ , usually as lead mechanical installer of varying values in the following areas. Potable Water The installation of new and refurbishment of existing filters (RGF, DAF, GAC & RO), chemical dosing equipment and LP Block/Leopold flooring. Works include manufacture and installation of: Filter internals. Aeration and process pipework. Access steelwork. Launders. Weir plates. Installation of pumps, blowers and associated mechanical packages, trough plates, media and penstocks. Wastewater Installation of various designs of deep beds filters, submerged aeration filters, sequencing batch reactors, digesters, activated sludge plant, tertiary filters, centrifuges, screens, classifiers. Works include manufacture and installation of: Filter internals. Aeration and process pipework. Access steelwork. Launders. Weir plates. Installation of pumps, blowers and associated mechanical packages, trough plates, media and penstocks. Waste to Energy/Power Generation Installation of biogas CHP systems, waste incineration plants, electrostatic precipitator installations, gas scrubber installations, digester heating/circulation and internals. Works include manufacture and installation of: High pressure super heated/saturated and low pressure steam. Natural gas. Fuel oil. Compressed/instrument air. Chemical dosing pipework. Access and support structures. Pipe bridges. Large bore ducting up to 2000mm (mild steel and stainless). Ash transfer systems. GRP acid/alkaline pipework. Installation of pumps, driers, scrubber vessels, tanks and associated mechanical packages.

Waterco are engineering and environmental consultants providing design and consultancy services relating to water, drainage and flood risk. We have expertise in engineering and environmental disciplines and are supplemented by a network of specialist independent consultants with extensive experience in major development projects throughout the UK. Our focus is on achieving the optimum solution for our clients, meeting their objectives and adding value to their projects. We have gained a reputation for a friendly, professional and flexible approach since our establishment in 1990. Our Services Water industry infrastructure and non-infrastructure projects Pipelines & Sewerage Water & Wastewater Treatment & Systems Pumping Stations Contingency Planning Security Assessments Asset Management Surge Analysis Hydraulic Modelling Flood Risk Assessment Breach Analysis Coastal & Shoreline Analysis Surface Water Management Sustainable Drainage Systems Natural Flood Management/Catchment Approaches Clients and Partners Our clients and partners include water companies, consultants and contractors. Incorporating their experience and knowledge, we investigate and develop practical designs, to help deliver cost-effective solutions. Geographic Coverage We undertake projects all across the UK, with many of our reporting services being desk-based, travelling to site visits and meetings as required. We have also been involved in international projects such as a major development in Lekki, Nigeria. Accreditations We currently have an ISO 9001 : 2015 accredited Quality Management System; have a BS8555 : 2003 certified Environmental Management System; have design approval in the Water Industry Registration Scheme (WIRS); have maintained Investors in People recognition since 2011 and operate an ICE approved training scheme.

Technocover is an approved ISO 14001:2004 Environmental and ISO 9001:2008 Quality Accredited Company, dedicated to the Design, Manufacture, Installation and Maintenance of Physical Security Access Solutions for protection to all industrial sectors. Our extensive in-house design and manufacturing facilities are home to well established research and development unit and comprehensive testing facility. Our commercial offices incorporate our design team who utilise the latest computer aided design technology and work alongside our dedicated planning section who oversee everything from surveying, scheduling and contract reviews, to the management of framework agreements. We have been designing and manufacturing innovative steel products since 1993. In that time, through organic growth, planned expansion and acquisition, we have gained a reputation as the UK’s leading supplier of Physical Steel Security Access Products. We have a range of aperture security solutions for virtually every application, establishments in the UK and overseas have sought our expertise in providing security products for asset protection. We operate a Total Service Philosophy and can handle complete projects from site survey to final installation, whether for new or refurbishing projects, the adaptability of our galvanised steel access products means the most complex design criteria can be met. Our range of high quality access products offer custom built operational and security solutions to prevent unauthorised persons gaining access, securing key assets against all levels of trespass, malicious vandalism, theft, extortion, contamination or terrorism. Many of our access system products have been tested and approved by the Loss Prevention Certification Board (LPCB)  to LPS 1175 issue 5 or above, Security Rating Levels 2, 3, 4 or 5. Frameworks We hold both exclusive and shared framework agreements with most of the major UK water companies. Framework Security items include: LPCB Level 2 Universal Gas Cylinder Clamps LPCB Level 3 Mesh Cage Systems LPCB Level 3 Flush Access Covers LPCB Level 4 Upstand Access Covers LPCB Level 4 Padlockable Access Doors LPCB Level 4 Key Entry Doors LPCB Level 4 Enclosures/Kiosks/Cabinets LPCB Level 4 Walk-In Modular Buildings LPCB Level 4 Window Bar Sets LPCB Level 5 Louvres

SEEPEX is a leading worldwide specialist in the design, manufacture and application of progressive cavity pumps, macerators and digital solutions which optimise uptime and reduce downtime to give an optimal TOTEX solution. Our products and expertise are applied in most applications in the wastewater industry wherever thin to highly viscous and high % DS media is conveyed. Each solution is custom-configured to suit our customers’ requirements. Pump Technology 4.0 SEEPEX Digital Solutions incorporating the Pump Monitor turn the progressive cavity pump into an intelligent field device, operating in a networked system of smart products, services and processes. SEEPEX cloud-based service provides online remote monitoring and management of the pumps and process. Data collection and advanced analytics enable process and pump optimisation and reduce inspection, downtime and operating costs, facilitating predictive maintenance and timely delivery of spare parts to improve overall equipment and plant efficiency. Unlocking the Power of Digital Our latest innovation, the most intelligent progressive cavity pump in the world, allows remote adjustment to maintain pump performance without onsite manual intervention. With SEEPEX unique SCT AutoAdjust technology, combined with our digital solutions, site visits for maintenance are eliminated and access to otherwise hard to reach pump installations can be carried out remotely. Energy Efficient Long Distance Pumping of Dewatered Sludge Our dewatered sludge handling solutions include Smart Air Injection (SAI) technology, an energy efficient system delivering energy savings of approximately 40% by combining a progressive cavity pump with pneumatic dense phase conveying to transport 14-40% DS sludge over long distances up to 1,000 meters. This alternative to conventional technologies has proven to significantly reduce operational (energy, spare parts and downtime) and total investment costs. Patented Solutions for Smart Maintenance. Fast and Simple. SEEPEX continues to extend its world class portfolio of maintain-in-place technologies for pumps with capacities up to 300m3/hr and 48 bar, able to handle flowable to highly viscous products with a high % DS content. The new patented BNM range has been designed to simplify customers’ maintenance and can reduce maintenance time by up to 80% with a significant reduction in related costs. SEEPEX latest ease of maintenance solution for big pumps complements our Smart Conveying Technology (SCT), launched in 2008 and still setting standards in the maintenance of smaller standard progressive cavity pumps, and Drive Joint Access (DJA) technology for open hopper pumps. All of these patented solutions increase uptime and plant availability.

The Fluid Group are specialists in CFD (computational fluid dynamics) for Water, Wastewater, Chemical and Environmental Engineering. Founded in 2005, we provide state-of-the art, 3D flow modelling from first principles. In the water sector, CFD modelling is used to optimise the design and operation of mixing tanks, contact tanks, reservoirs, pumping stations, flow splits, filter distribution systems, dissolved air flotation tanks, clarifiers, digesters, inlet works and outfalls… all aspects of water and wastewater treatment, storage and distribution. From single phase to multiphase simulation with water/air and solids, 3D flow modelling can confirm whether a new engineering design will meet the design objectives, or assist with understanding why an existing plant is failing to perform as expected.

CTM Systems Ltd provide bespoke solutions for the handling and storage of a wide varied range of bulk materials. From design to commissioning we will provide you with unmatched quality and service, our in-house design, manufacturing and installation capabilities ensure that your project will exceed your expectations whilst remaining ultimately competitive. Maximise your investment with our ongoing service and support facility ensuring that your installation will function correctly and give years of trouble free and cost effective use. CTM Systems is housed in an 8,500 square feet facility with separate design and sales offices all compliant to ISO 9001. CTM Systems design, manufacture, install, commission and service bespoke solutions for the Quarrying, Food, Water and Chemical and Sewage Industries for: Conveyors. Storage silos. Elevators. Mixers. Blanchers. Live bin systems. Materials handling processing & storage. From the offset of an enquiry, CTM Systems offers a fast, accurate and highly competitive quotation. Whether liaising from ready-available customer drawings or measurements from green field sties. our sales team will be on hand to assist your standard or bespoke requirements. We at CTM Systems pride ourselves in being at the forefront of new developments within these industries and all equipment is designed, manufactured and tested at our premises.

Metasphere helps customers prevent leaks and spills for a cleaner, greener world. As a wastewater application specialist business, we provide monitoring solutions to the global utility industry with over 40 000 installations in 25 major utilities. Metasphere liaises with all sectors of the industry, from major utility companies to environmental and regulatory bodies. Utilising the latest technology, we deliver intelligent, innovative all-in-one telemetry solutions that provide full network visibility, performance and forecasting that reduce telemetry ownership cost for customers to manage time-critical remote assets and systems. Our solutions are suited for Water, Wastewater, Environmental and Gas applications.

PCI Membranes is the specialist filtration and separation company, which in turn is a business unit of Filtration Group. It specialises in custom-built crossflow membrane filtration systems for liquid separation in the process industries. With experience developed over forty years, we are able to offer process solutions for a wide variety of filtration applications using microfiltration, ultrafiltration, nanofiltration and reverse osmosis technologies in tubular geometry. We have developed expertise using all of the leading polymeric crossflow membranes and membrane configurations available on the world market and is therefore ideally placed to match a membrane to a specific application. More than 50 Years Serving Our Customers We offer a commitment to excellence that is supported by: International experience in solving problems since 1967. An application engineering team that designs the specific system for your needs. An experienced design engineering team dedicated to product performance and reliability. A state-of-the-art facility with highly trained production personnel. A service team trained to handle any problem, anywhere in the world. We design, manage the manufacture of, and supply equipment for liquid separation to the quality standard: BS EN ISO 9001:2015.

FLI Precast Solutions (formerly FLI Carlow) provide design, engineering and manufacturing services for the off-site manufacture of specialist concrete infrastructure and attenuation systems. Our markets include Water, Wastewater, Energy and Storm Attenuation in the UK & Ireland and bespoke projects globally. SERVICES INCLUDE Design, engineering and manufacturing services for the off-site manufacture of specialist concrete infrastructure and attenuation systems. Design to national and international water industry standards and our semi-precast modular designs make us the industry leader in off-site concrete engineering and manufacture. By early involvement and integrating with our clients’ design teams we can accelerate and improve design optimisation and reduce cost. The value is in the solution, and off-site manufacturing and fabrication leads to higher efficiencies and lower risks and costs. Framework agreements enable us to add more value through collaboration, innovation, economies of scale, supply chain partnering and cost management. Our products and designs are engineered to provide solutions to many challenges facing our clients: water retention, water storage, water conveyancing, water management, water treatment, fire-resistance criteria, chemical resistance parameters, infrastructural products, retaining walls, coastal erosion, decorative walls, to name a few. We are a solutions provider using innovative off-site concrete engineering and our industry leading semi-precast modular designs. The company is part of the FLI Group which is a diversified group of companies providing environmental solutions, services and technologies to private and public sector customers in the UK, France, Ireland and throughout the world. PRODUCTS INCLUDE Service reservoirs Process settlement tanks (PST / HST / FST / etc) Storm & attenuation tanks (network or site based) Process structures (ASP / TSR / GAC / RGF / etc) MCC service foundations Bund wall system Chambers Channel & lids Comms chambers Multi-purpose chambers Bespoke culverts Holding tanks Barriers Demountable fence supports (international airport approved) Ballast blocks Dry flow channelling Foundation bases Blast fence supports

Tracey Concrete is one of the largest precast concrete manufacturers in the UK and Ireland. With our extensive range of top quality products we offer competitive and reliable solutions to meet all of our customer’s needs. Our success has been built on the consistent quality of our products, efficient delivery and outstanding customer service. With our vast experience and expertise in the construction industry we have been able to supply some of the biggest projects in the UK and Ireland. Our products have achieved all necessary certifications and are accredited with the most up to date British and European standards, with the relevant products being BSI kitemarked and CE marked. Through extensive research our technical team is always looking for the most advanced innovations in the industry and work closely with our customers to provide any project designs required. We are always environmentally conscious in the manufacturing and delivery process. We are committed to ensuring all of our products provide the economic benefits required for sustainable construction.

Te-Tech Process Solutions is a provider of traditional products and advanced process technologies for water and wastewater treatment. Our products cater for a range of client needs from standardised products to bespoke applications designed to meet the exacting needs of the client’s process. Our in-house capability includes process, mechanical and electrical design, off-site manufacture and assembly, MCC and Control Panel Manufacture and System Integration. Our extended services include digital engineering, service and maintenance, operational support and real time control. Advanced technology and innovation are at the core of our business enabling us to provide high quality, efficient solutions to our clients. Our business is founded upon 4 key areas of expertise: WATER & WASTEWATER TREATMENT Te-Tech deliver established water and wastewater products and processes, including: te-cyc TM: Cyclic activated sludge ‘Macrofloc’ biological wastewater treatment te-saf TM: Packaged submerged aerated filters te-ion TM: Advanced oxidation technology for water and wastewater treatment te-mem TM: Advanced membrane filtration te-mbr TM: Package advanced membrane filtration te-sewpas TM: Airlift sludge removal plant te-uv TM: UV disinfection AUTOMATION CONTROL & TECHNOLOGY Our MCC and control panels are provided into multiple sectors including process and water, marine, oil & gas, energy, nuclear, defence and building services. Our capabilities include: MCCs LV Switchboards Local Control Panels Software System Integration DIGITAL ENGINEERING Te-Tech utilise cutting edge digital technologies to provide innovative solutions to our client’s problems. Our digital engineering services support the whole life cycle of our clients’ assets from conceptual design, through design for manufacture and assembly (DfMA), installation on site, final commissioning, operation and maintenance and decommissioning at the end of the asset’s life. Our in-house software capability provides clients with the visualisation tools to precisely view and interrogate designs in a virtual world to minimise clashes, delays or abortive activities and to ensure that the delivered assets are acceptable to operators in the real world. Our BIM capability ensures our products and technologies create assets that are fit for the future and our virtual reality technology allows our teams and clients to fully immerse themselves in the design, optimisation and operation of our solution prior to manufacturing. Our asset optimisation capability helps clients get the best performance out of their assets, by integrating real time control and using data driven insight we can ensure the sustainability and efficiency of asset performance across its lifecycle. Our virtual environment shows the equipment in operation, with liquids moving and plant turning on/off according to the actual system control philosophy. This is an invaluable tool for HAZOPS, ALM and remote training of operators before the plant is constructed – reducing risk and time on site OFF-SITE MANUFACTURING & ASSEMBLY Te-Tech’s off-site manufacture and assembly capability provides standard products and engineered solutions to the water and wastewater sector, oil and gas and energy industries. Its primary focus is on solutions which are designed for manufacture and assembly DfMA; reducing on site construction time, reducing carbon footprint and minimising risk. At our Southampton based headquarters we have over 1000 sq. metres of internal manufacturing space as well as external areas for assembly and storage of larger materials and manufactured components. We design, manufacture and assemble to a range of different standards including CE/CA marking, EXC2 Structural Steel, BS and ASME welding procedures. Our strength within Te-Tech culminates in our integrated service, offering the complete process solution package, from digital design, automation and control through to off-site manufacture and on site assembly.

Flood Control International (FCI) is a UK based specialist designer, supplier and installer of the most comprehensive range of flood defence systems in the world.

Since the early 1980s, BIO-BLOK an EXPO-NET brand has been producing high-performing filter media that helps increase the surface area in your system to improve the efficiency and reducing the footprint required for assets. EXPO-NET Danmark A/S is a family-owned company, founded in 1959, which is currently run by 3rd generation, Managing Director Lars Klinkby. Today, EXPO-NET is an international Danish business, with local sales offices in France, England, Holland and Australia, and key global supply chain partners. The company has more than 60 years’ experience in manufacturing extruded plastic mesh solutions tailored to customer requirements. The company’s head office and main operational site is located in a 38,000 sq. m high tech manufacturing facility in the industrial area of Hjørring in northern Denmark. The site includes extrusion production lines for custom making thermoplastic mesh products, an in-house R& D laboratory and extensive warehousing. EXPO-NET was one of the first European manufacturers of extruded plastic products to become BRC certified for the supply of netting products for food packaging, and now also has ISO 9001:2015 and ISO 14001:2015 certifications for its main Danish production site and operations. The business has an ongoing proactive commitment to addressing climate change by recycling, developing more sustainable plastic net products and reducing its CO2 footprint across the entire business.

ABC Stainless Ltd (formed in 1981) are a specialist stainless steel company, offering a full range of services including design, manufacture, supply, installation and commissioning to main contractors and Water Authorities, in the Water Industry. We supply a diverse range of stainless steel products to both WTW and WwTW, including our unique ‘Weldless Collar Pipe System’. This system minimises site fabrication and attendance, supplying prefabricated pipe spools for installation. We welcome enquiries relating to both sheet, plate & tube in all grades of stainless steel including exotic and aluminum, manufacturing stainless steel pipework systems (metric, schedule, dairy etc.), biogas systems, hygienic tanks, pressure & vacuum vessels, platforms, launders, pen stocks, screens, skid process units, weirs etc. DWI Approval We have ISO 9001:2008 accreditation and Drinking Water Inspectorate (DWI 56.4.516) manufacturing approval for our ‘Weldless Collar Pipe System’, and ABC Storage, Process Tanks & Vessels, this is under regulation 31(4)(a) of the Water Supply (Water Quality) regulations 2000 No.3184 & the Water Supply (Water Quality) regulations 2001(Wales) No.3911. In all cases, products are manufactured specifically for each project after full discussion with our clients and our own design office. We offer a full design & draughting service using the latest 3D modelling software. Material certification, quality plans, procedures, employee certification and testing are available upon request, with third party Insurer witness testing where required. We offer a range of material finishes including bead blast, bright (mirror) polished, satine (brushed) polished and 2B.

Vogelsang are suppliers of Rotary Lobe pumps which are typically used in the waste water treatment sector to pump raw sewage and sludges, where the dry solid content is between 6% and 15% (by weight). Their use on an anaerobic digestion facility on a sewage treatment plant is very common application. The pumps are able to pass foreign bodies, can handle on a suction lift application (with a repeated self priming requirement) and are largely insensitive to dry running. The reversibility of the lobe pumps makes them suitable for membrane applications where running the pump in reverse allows for a cleaning of the membrane. We also offer inline RotaCut macerators and XRipper twin shaft grinders / shredders which are used to protect a downstream pump. These products too are in widespread use in the UK waste water treatment sector and are bespoke specified and manufactured to suit a specific application. The XRipper is suitable for both pipework and open channel applications and as with all of our products are robust and can be easily serviced by the end user without the need to remove it from site, ensuring the whole-of-life cost of ownership is minimised. We operate out of a facility in Crewe in Cheshire that has a comprehensive spares parts store. The company can provide both a field service and repair workshop service.

For over 40 years, iNPIPE PRODUCTS™ has been an acknowledged world leader in the design, manufacture, and supply of advanced pipeline pigging products and services. Our expertise extends across a wide range of industries, with tailored solutions for water pipelines, including pig launching/receiving systems, pig handling equipment, bespoke cleaning and inspection tools, and pig tracking technologies. Our dedicated manufacturing and testing site can produce cleaning tools up to 3000mm in diameter. Our cutting-edge pipeline cleaning and inspection solutions ensure maximum asset integrity while promoting environmental sustainability. iNPIPE PRODUCTS™ offers a more eco-friendly alternative to traditional methods, reducing waste and emissions, while achieving the highest standards of pipeline cleanliness. Clean pipelines enhance performance, protect capital investments, and minimises operational downtime—all while reducing environmental impacts. With extensive engineering expertise and integrated manufacturing capabilities, we deliver custom-engineered turnkey solutions that meet the most demanding client requirements. Our Services Include: Tailored engineering solutions and expert consultancy Bespoke design, manufacturing and supply of pipeline tools Full project management and on-site technical support Advanced cleaning, inspection and maintenance services Visual inspection of pipeline interiors Debris mapping for internal condition analysis Validation of pipeline cleaning regimes for optimal performance Our SMART Pigging solutions offer industry-leading pipeline inspection capabilities that ensure maximum flow assurance and comprehensive asset integrity; utilising advanced technologies like the PHOENIX Debris Mapping Tool and Camera Integrated Pig for pipeline assessment, joint inspection and crossing validation prior to slip-lining. Trusted by global operators, iNPIPE PRODUCTS™ is committed to quality, safety and sustainability, with ISO 9001, ISO 45001 and ISO 14001 certifications. We are proud to be RoSPA Health & Safety Award winners for seven consecutive years, achieving the Gold Medal in 2024.

Steve Vick International (SVI) is dedicated to delivering cost-saving solutions for damaged, redundant or outdated underground pipework. Since its foundation in 1981, SVI has been at the forefront in developing products and techniques for the repair, renovation and decommissioning of pipes. Predominantly our work has been in the gas industry but increasingly we are undertaking projects in the water and nuclear sectors. We are the UK’s leading producer of Pipe Coil Trailers and offer a range of Pipe Handling equipment such as Handlers, Crackers and Cutters. Some of our latest innovations include the PE Pipe Cutter, the Pipe Feeder for Pre-Insulated coiled pipe, PE Live Head for Live Mains Insertion, the Perpetual Pipe Pusher, FBOS (Foambag Operation on Stubs) and SMARTester. WATER: For over 20 years water utilities and their contractors in the UK and overseas have used our pipe handling equipment to improve their efficiency and safety. Today our products include Pipe Handlers, Pipe Coil Trailers and Pipe Cutters as well as our patented DRAINBLOCK™ and RATBLOCK™ sealing systems. GAS: In the UK we are major suppliers to all the gas distribution networks. Many of the techniques we have pioneered have become the preferred methods of working in the industry and our resin foam sealant products and associated equipment are key to many of the cost-saving renovation processes used. NUCLEAR: SVI offer solutions to the problems associated with decommissioning and sealing disused pipework, ducts, sleeves and ventilation shafts. Our technology can also be designed for the mass filling of large and complex voids and is a lightweight alternative to cement grout. We have worked at Hinkley, Sellafield, Harwell, Chapelcross and Hunterston. CONTRACT SERVICES: A rapidly expanding part of our business is our Contract Service department who are well known for their work in the field of renewing and repairing underground gas pipes, for the UK Gas Distribution Networks. However, they are becoming increasingly involved in projects being undertaken by water utilities, electricity providers, rail networks, civil engineers, construction companies and local councils. This reflects the range of skills and expertise available to solve on-site problems associated with pipe repair, renovation, and diversion. Located strategically around the UK the highly skilled team can provide a fast response, emergency repairs and a rapid call out service which is offered 24 hours a day, 7 days a week. HIRE: We offer specialist plant and equipment for the Utilities Industries. Products available for hire include our Pipe Handlers, Perpetual Pipe Pusher, Pipe Coil Trailers, Rapid Rotary Cutters, Rapid Window Cutters, MACAW Pipe Crackers, CRACKERJACK and Mini Purge. All our hire equipment comes with onsite support from our highly experienced engineers and our products are fully maintained and serviced at our depots. All equipment is also available to purchase. SMARTester: SMARTester is the wireless pressure test system, that ensures absolute traceability and best practice. The system combines: SMARTester pressure sensor, an intuitive App and a Dashboard database of test evidence. Together the 3 components work to give you confidence that your tests are highly accurate, fully compliant and that evidence is traceable.

Bramley Engineering ltd was established in Ivinghoe in 1981 by John & Davina Bramley following John’s apprenticeship and early career in South Africa. Now based in Leighton Buzzard and run since 2007 by Graham and Emma Bramley the company remains a family run business encompassing a hardworking, fun, and fair working ethos that benefits our customers, suppliers, and staff. Over the last 40 years the company has evolved to ensure it meets health and safety requirements, is up to date with legislation and has safe working practices. We became ISO registered in 2004 following a large project for the nuclear power sector, we have continued to develop our systems as demands and in-house practices have required it. Bramley Engineering manufactures many forms of lifting equipment including overhead cranes, gantries, monorails, jib cranes and davits. We specialise in bespoke lifting solutions and have over the years provided solutions for many varied situations. Using the latest in CAD technology Graham continues to improve and adapt his knowledge to the needs of the customer. Our customers are many and varied and include the water industry for whom we have been working for twenty-five years, construction companies both large and small and the rail sector. In 2018 we won a contract to provide a grid system of 18 cranes in Lincoln for Siemens rail, this project saw us win our first award for ‘working as one’ with the customer. This award was greatly appreciated as not only did it show the customers appreciation it reminded us that our working practices and ethos are in line with ‘lifting your expectations’. We are members of the Lifting Equipment Engineers Association (LEEA) whose knowledge and expertise are always on hand should we require assistance. They audit us annually and ensure we are up to date with latest legislation and that our working practices meet the needs of our customers. As well as the cranes and lifting solutions we provide LOLER examinations and sell all ‘below the hook’ lifting accessories. We have an online system that keeps records of all the equipment we have examined. Our customers can always have access to their certificates ensuring they are compliant with health and safety requirements. We hold stock of web and round slings, shackles and chain slings and welcome customers to visit our premises to discuss their needs. Bramley Engineering always welcome new and exciting challenges with both existing and new customers.  We relish the chance to expand our bespoke lifting portfolio and to use our extensive knowledge and innovative outlook to help others find their perfect lifting solution.  We are always striving to lift expectations.

Started in 1955, KEE design, manufacture, supply, install, commission and service off mains drainage products, including pumps and pumping equipment, septic tanks and sewage treatment plant products. KEE also offer full evaluation and design through their nationwide servicing team, offering fully integrated plant operation, an out-of-hours call centre, treatment plant refurbishment, upgrades and plant hire. KEE’s expertise in design, manufacture, servicing, refurbishment, maintenance and operation of equipment for all types of wastewater treatment plants is backed by over 65 years of experience and over 350,000 installations worldwide. KEE provide quality engineered wastewater treatment solutions priced to offer value for money. Continuing investment in R&D ensures that the products and services supplied by KEE incorporate the latest technology to protect the environment. TREATMENT SOLUTIONS & SERVICES Rotating Biological Contactor (RBC) Wastewater Treatment Systems KEE NuDisc® & NuDisc-R® single piece packaged RBC treatment plants capable of treating populations up to 1,000 in a single packaged plant. Modular packaged DC/DN RBC treatment systems. Large diameter RBCs for site erection. Submerged Aerated Filters Modular packaged and single piece KEE NuFlow treatment systems for domestic applications up to 50 PE. Activated Sludge Systems Extended aeration (EA), sequencing batch reactors (SBR) and oxidation ditch. Anaerobic Reactor Industrial wastewater treatment. Settlement Tanks and Packaged Pumping Stations Primary or final settlement tanks. Dispersed Air Flotation Systems (DAF) KEE Microfloat® Fine Bubble Aeration Systems KEE Aspirator Aerators. KEE Triton Aerator/Mixer. The Biological Solution to Fat, Oil and Grease KEE Bio-Guard – The Grease Digester. Parts and Service Service, Maintenance and Operation. Replacement Parts and Associated Products. Plant Hire. Emergency Service KEE Emergency Call Centre for Managed Contracts.

FT Water Treatment offers a range of solutions for the water treatment market. This includes pipes, fittings, valves, and measurement and control, along with dual contained pipework for chemical dosing. All products are available to the necessary accreditations and all recognised grades of materials supplied to this market. Chemical Dosing Dual Containment A dual-walled pipe is a secondary contained piping system. It is a pipe within a pipe, or encased in an outer covering, with a space between the two diameters. The inner pipe is the primary or carrier pipe and the outer pipe is called the secondary or containment pipe. The great majority of double-walled piping applications involve wastewater, groundwater and process safety. We offer duel contained pipe systems in both rigid and flexible plastics. Flexible systems are available in PVC, LDPE and PTFE: We offer a new innovation in leak detectable chemical dosing hose, PF Detect. Rigid systems: Rigid dual contained and single pipework available in HDPE, PP, PVC, CPVC and PVDF. Leak detection is available in both systems. We are certified to ISO 9001, ISO 14001 and ISO 45001.