Water treatment solution providers, shortlisted.

Founded in 1987 Alpha Plus Limited have been providing quality pipework, fabrication and installation of pipework, structures and mechanical plant for the utility, waste management, industrial / commercial and manufacturing sectors. Alpha Plus is committed to providing clients with innovative, cost effective, high quality solutions. We work closely with clients providing design, fabrication and installation to a high quality using approved standards and up to date technologies. We provide a wide range of services with a wealth of experience in the following areas: Pipework. Installation. Structural. Design and project management. Site Maintenance. Alpha Plus has successfully completed numerous contracts, varying in size from £10,000 to £3M+ , usually as lead mechanical installer of varying values in the following areas. Potable Water The installation of new and refurbishment of existing filters (RGF, DAF, GAC & RO), chemical dosing equipment and LP Block/Leopold flooring. Works include manufacture and installation of: Filter internals. Aeration and process pipework. Access steelwork. Launders. Weir plates. Installation of pumps, blowers and associated mechanical packages, trough plates, media and penstocks. Wastewater Installation of various designs of deep beds filters, submerged aeration filters, sequencing batch reactors, digesters, activated sludge plant, tertiary filters, centrifuges, screens, classifiers. Works include manufacture and installation of: Filter internals. Aeration and process pipework. Access steelwork. Launders. Weir plates. Installation of pumps, blowers and associated mechanical packages, trough plates, media and penstocks. Waste to Energy/Power Generation Installation of biogas CHP systems, waste incineration plants, electrostatic precipitator installations, gas scrubber installations, digester heating/circulation and internals. Works include manufacture and installation of: High pressure super heated/saturated and low pressure steam. Natural gas. Fuel oil. Compressed/instrument air. Chemical dosing pipework. Access and support structures. Pipe bridges. Large bore ducting up to 2000mm (mild steel and stainless). Ash transfer systems. GRP acid/alkaline pipework. Installation of pumps, driers, scrubber vessels, tanks and associated mechanical packages.

Solids Technology International was established in 1979 in Dublin, Ireland to develop high-performance belt filter dewatering equipment and innovative solutions for the water and wastewater industry. In 2002 the company was taken over by Kent Stainless. The manufacturing facility includes 3D laser cutting, CNC sheet, electro-polishing and bead blasting finishing plants. Employing over 100 people and resources including over 50 people with mechanical or electrical trades and over 20 design engineers working utilising 3D design packages gives Solids Technology the capability to supply turnkey thickening, dewatering and poly preparation solutions. Today there are over 800 Solids Technology belt filter systems worldwide and are one of the leaders within the marketplace for Stainless steel, fully enclosed, automated high-performance dewatering and thickening system. Our product range includes: Filter Belt Presses, Gravity Belt Thickeners, Poly Preparation Systems.

Technocover is an approved ISO 14001:2004 Environmental and ISO 9001:2008 Quality Accredited Company, dedicated to the Design, Manufacture, Installation and Maintenance of Physical Security Access Solutions for protection to all industrial sectors. Our extensive in-house design and manufacturing facilities are home to well established research and development unit and comprehensive testing facility. Our commercial offices incorporate our design team who utilise the latest computer aided design technology and work alongside our dedicated planning section who oversee everything from surveying, scheduling and contract reviews, to the management of framework agreements. We have been designing and manufacturing innovative steel products since 1993. In that time, through organic growth, planned expansion and acquisition, we have gained a reputation as the UK’s leading supplier of Physical Steel Security Access Products. We have a range of aperture security solutions for virtually every application, establishments in the UK and overseas have sought our expertise in providing security products for asset protection. We operate a Total Service Philosophy and can handle complete projects from site survey to final installation, whether for new or refurbishing projects, the adaptability of our galvanised steel access products means the most complex design criteria can be met. Our range of high quality access products offer custom built operational and security solutions to prevent unauthorised persons gaining access, securing key assets against all levels of trespass, malicious vandalism, theft, extortion, contamination or terrorism. Many of our access system products have been tested and approved by the Loss Prevention Certification Board (LPCB)  to LPS 1175 issue 5 or above, Security Rating Levels 2, 3, 4 or 5. Frameworks We hold both exclusive and shared framework agreements with most of the major UK water companies. Framework Security items include: LPCB Level 2 Universal Gas Cylinder Clamps LPCB Level 3 Mesh Cage Systems LPCB Level 3 Flush Access Covers LPCB Level 4 Upstand Access Covers LPCB Level 4 Padlockable Access Doors LPCB Level 4 Key Entry Doors LPCB Level 4 Enclosures/Kiosks/Cabinets LPCB Level 4 Walk-In Modular Buildings LPCB Level 4 Window Bar Sets LPCB Level 5 Louvres

With sixteen divisions and twelve manufacturing plants, FP McCann is the UK’s largest precast concrete manufacture. They provide an extensive range of precast concrete solutions, including drainage, tanks, tunnels and shafts, rail, power and infrastructure, filter bed systems, walling, fencing, agricultural, architectural and structural building solutions, flooring, dock leveller pits and specialist precast products. McCann will customise their solutions to ensure they create maximum value for your project, accommodating your site conditions, design requirements and construction needs. The quality and reliability of McCann’s products and services are the foundation of their success. They are constantly developing and improving their solutions, whilst striving to exceed their customers’ expectations. McCann’s extensive range of precast drainage products include pipes, wide wall/manhole chambers/soakways, cover slabs, gullies, headwalls, box culverts, fall arrest systems, house inspection chambers, catchpits, flow control and valve chambers, hydrodynamic separators, rain harvesting systems etc. They also provide bespoke multipurpose tank chambers and panel systems. The geographical spread of their twelve modern precast manufacturing plants, coupled with their ability to deliver to their clients’ specifications on major projects across the UK and Ireland, has established McCann as a valuable and reliable partner. At McCann, they promise to build strong, sustainable relationships with their stakeholders. By implementing their corporate values, they aim to deliver on this guarantee through their products, services, communications and, above all, the behaviour of their people. They recognise the importance of operating with integrity and apply high standards of corporate governance in the conduct of their business.

PWNT, part of the Nijhuis Saur Industries (NSI) group, delivers cutting-edge solutions and consultancy services to meet the diverse needs of water utilities worldwide. Building on PWN’s rich legacy, PWNT leverages over 100 years of expertise to drive innovation in water treatment, with a strong focus on drinking water. Our pioneering technologies, including SIX® (Suspended Ion Exchange), ILCA® (Inline Coagulation and Adsorption), and CeraMac® (Ceramic Membrane Microfiltration), offer efficient, sustainable, and cost-effective treatment solutions for various water sources, ensuring the delivery of high-quality drinking water. Beyond technology development, PWNT offers comprehensive consultancy services in the study, design, optimization, and integration of water treatment technologies. PWNT is well-equipped to provide expert guidance on both emerging and traditional processes, such as pellet softening, advanced oxidation, GAC filtration, and coagulation. With a strong global presence, PWNT has successfully implemented large-scale projects and pilot installations across the world. Our innovative technologies are trusted by water utilities for their ability to address complex water quality challenges and adapt to diverse environmental conditions. Headquartered in the Netherlands, PWNT continues to foster strong partnerships with leading universities and global companies, committed to advancing sustainable water treatment technologies and helping utilities achieve their water quality goals.

Bürkert Fluid Control Systems are a German and family-owned manufacturer of fluid control products and systems. We were established in 1946 by Christian Bürkert, with our headquarters in Ingelfingen, Germany. We boast 5 factories in Germany, France, the US and China and sales subsidiaries in 30 countries, with over 3200 employees across the world. In addition to 5 Systemhaus’, which work on bespoke and customised solutions in close partnership with our customers. We manufacture over 670 product types, in up to 20 million variants. These include water quality monitors, process control valves, pneumatics, flow sensors, micro valves and pumps, flow meters and controllers. Essentially, we can produce the full fluid control and measurement loop for whatever fluid or gas you are working with, whether this be measuring, controlling, mixing, levelling, dosing and analysing. We also focus on process automation with intelligent communication modules which can be integrated into a process or plant and our online water quality monitoring devices for continuous control.

Frontier Pitts is the British manufacturer of high security perimeter equipment solutions. Our large portfolio of products, comprehensive range of services and extensive Research and Development program and integrated turnkey solutions ensures that Frontier Pitts can meet the requirements of any high security application, whilst remaining at the forefront of design and technology. Frontier Pitts is the British manufacturer of Security Gates, Automatic Barriers, Roadblockers, Rising & Static Bollards, Pedestrian Control Gates & Turnstiles, and the Anti Terra Hostile Vehicle Mitigation (HVM) range which has been successfully IWA14 & PAS68 impact tested. Frontier Pitts is more than a manufacturer, with the ability to provide a complete range of services including design, site surveys, manufacture, installation, civil and electrical services, maintenance, spares, repair or refurbishment and full project management. As both the manufacturer and supplier we feel that maintenance is an integral part of your equipment. Our range of Maintenance Contracts are designed to suit individual site requirements and include response times of just 4 hours. Accreditations include ISO 9001, Secured by Design, CHAS and Safe Contractor. As one of the founding members of the PSSA (Perimeter Security Suppliers Association), Frontier Pitts was one of the first members to volunteer themselves to be audited by the trade association, applying to meet the new product verification scheme. The PSSA Verification recognises Frontier Pitts promise to provide our clients with the high end quality product and a fully comprehensive customer service package. Our products secure some prestigious sites internationally and in the UK including the Houses of Parliament and we provided Terra equipment for the London 2012 Olympics. Within the Water Industry, our equipment protects Thames Barriers, Dartford Creek, and various other sites nationally for Thames Water, Bristol Water and Anglian Water to name a few.

Here at PLR Building Services, our team brings extensive experience in the water industry, specialising in top-tier electrical installation work for framework companies across the utility companies. Our primary focus is on ensuring compliance with regulatory requirements for water systems. We offer a comprehensive electrical design package and project management services. Our team is equipped with the latest health, safety, and electrical qualifications to meet all your project requirements efficiently. As a NICEIC approved contractor, we excel in both new systems installation and the refurbishment of existing installations. Water treatment Wastewater treatment Sludge treatment Pumping stations Reservoirs Inspection Testing Electrical Design Project managing

Elmo Rietschle, part of the Gardner Denver Group is a major manufacturer and supplier of compressed air and gas, vacuum pump, blower and fluid transfer technologies to the water and wastewater industries. Its experienced engineers can assist on the concept design of pumps for the OEM market, right through to system design for end users and custom built packages for central air or vacuum supply. Additionally, a comprehensive network of workshop and service engineers operates from five key geographical locations, offering 24-hour support and service. The company has recently added the GBH-8 to its range of side channel blowers designed for use in wastewater purification applications and in the oxygenation of activated sludge tanks. Compared to a standard blower of similar output, the new GBH-8 is 65% lighter, has a 40% smaller footprint, and offers twice the power. Using techniques such as CFD (computational fluid dynamics), the GBH-8 also offers high performance, with a continuous build-up of pressure. The unit features rotational speed control for easy setting of the optimal operating point, with pulsation free air supply and low noise levels. In addition, bearing lifetime in the GBH-8 is 20,000 hours, meaning downtime for maintenance, and the associated costs, are kept to a minimum.

PCI Membranes is the specialist filtration and separation company, which in turn is a business unit of Filtration Group. It specialises in custom-built crossflow membrane filtration systems for liquid separation in the process industries. With experience developed over forty years, we are able to offer process solutions for a wide variety of filtration applications using microfiltration, ultrafiltration, nanofiltration and reverse osmosis technologies in tubular geometry. We have developed expertise using all of the leading polymeric crossflow membranes and membrane configurations available on the world market and is therefore ideally placed to match a membrane to a specific application. More than 50 Years Serving Our Customers We offer a commitment to excellence that is supported by: International experience in solving problems since 1967. An application engineering team that designs the specific system for your needs. An experienced design engineering team dedicated to product performance and reliability. A state-of-the-art facility with highly trained production personnel. A service team trained to handle any problem, anywhere in the world. We design, manage the manufacture of, and supply equipment for liquid separation to the quality standard: BS EN ISO 9001:2015.

Saint Gobain PAM UK is the premier supplier of ductile iron and cast iron products to the UK's key utilities, telecoms, highways, civil engineering, construction and housing companies. We’re a leading manufacturer of ductile iron access covers, gully gratings, and pressure pipeline systems, helping the UK’s utility, highways, telecoms and infrastructure network owners reduce their whole-life costs and carbon while improving their asset durability and health and safety standards. We proudly manufacture our solutions, which enables us to not only meet but exceed the most stringent safety, quality and environmental standards. This means all of our access covers, gully gratings, and surface boxes are 100% recyclable. By providing innovative and sustainable access covers, gully gratings and pipeline systems that are right the first time, our customers enjoy quality and durable solutions that solve their problems the first time they’re installed – backed by the experts who designed them. 👨‍🔬🔬🥼 Saint-Gobain PAM UK is part of the Saint-Gobain Group, which employs over 166,000 people in 75 countries. With the international support of parent company Saint-Gobain, we offer unrivalled technical support, a total solution approach and unparalleled quality and innovation. Our solutions include: Ductile iron access covers, gully gratings and kerbside drainage solutions Ductile iron water and sewer pipes, fittings, valves, couplings and adaptors

Power Plastics Ltd, an ISO 9001 certified company, design, manufacture and install a range of flexible roofing systems for process tanks extensively used within the water and sewage industry. Their roofs are manufactured from tough high quality reinforced PVC materials supported on skeletal frames manufactured from aluminium, galvanised steel or stainless steel. The covers can be designed to be easily removed and refitted within minutes by one or two people without the need for specialist equipment giving unrestricted access to the tank process. This has great benefits in respect to monitoring and maintaining the tank process in addition to the added health safety benefits associated with a confined spaces issues. The roofs can be used for many purposes with materials being suitable for contact with drinking water and being resistant to corrosive materials. All their installations are carried out by highly skilled fittings teams which are overseen by project managers, who ensure that all health and safety issues have been considered in addition to providing thorough risk assessments and method statements prior to commencing any work on site. All designs are structurally proven by independent structural engineers and comply with the latest CDM regulations.

Piping Engineering Solutions Ltd is a piping engineering and design consultancy based in the North West of England. Our business is to provide piping engineering and design services to engineering contractors and clients for a variety of refinery, offshore, petrochemical, water and industrial projects. Our piping design and engineering solutions provide all aspects of piping survey, laser scanning, 3D detailed design, pipe stress analysis, Code calculations, FEA, structural design and analysis of pipe supporting structures and design management services within a single contract. All our work is completed in accordance with relevant national standards, PED and CDM and we are particularly experienced in the completion and documentation of piping design to the requirements of ASME B31.3, ASME B31.1 and the BS EN 13480 series of standards. From our Chester office we implement the latest CAD and engineering technologies to meet the project objectives and we are experienced users of AutoCAD, Plant 3D, Caesar II, Autopipe, Nozzlepro, Finglow, Staad and Navisworks. Our services are often provided to: Supply specialist skills, often at short notice, to deliver solutions for both small and large projects alike. Provide integrated solutions for all aspects of piping engineering and design project work on an as-needed basis, within a single contract. Deliver cost reductions to projects that cannot be met by traditional resourcing methods. Let us put our experience to work for you….

Metasphere helps customers prevent leaks and spills for a cleaner, greener world. As a wastewater application specialist business, we provide monitoring solutions to the global utility industry with over 40 000 installations in 25 major utilities. Metasphere liaises with all sectors of the industry, from major utility companies to environmental and regulatory bodies. Utilising the latest technology, we deliver intelligent, innovative all-in-one telemetry solutions that provide full network visibility, performance and forecasting that reduce telemetry ownership cost for customers to manage time-critical remote assets and systems. Our solutions are suited for Water, Wastewater, Environmental and Gas applications.

ABC Stainless Ltd (formed in 1981) are a specialist stainless steel company, offering a full range of services including design, manufacture, supply, installation and commissioning to main contractors and Water Authorities, in the Water Industry. We supply a diverse range of stainless steel products to both WTW and WwTW, including our unique ‘Weldless Collar Pipe System’. This system minimises site fabrication and attendance, supplying prefabricated pipe spools for installation. We welcome enquiries relating to both sheet, plate & tube in all grades of stainless steel including exotic and aluminum, manufacturing stainless steel pipework systems (metric, schedule, dairy etc.), biogas systems, hygienic tanks, pressure & vacuum vessels, platforms, launders, pen stocks, screens, skid process units, weirs etc. DWI Approval We have ISO 9001:2008 accreditation and Drinking Water Inspectorate (DWI 56.4.516) manufacturing approval for our ‘Weldless Collar Pipe System’, and ABC Storage, Process Tanks & Vessels, this is under regulation 31(4)(a) of the Water Supply (Water Quality) regulations 2000 No.3184 & the Water Supply (Water Quality) regulations 2001(Wales) No.3911. In all cases, products are manufactured specifically for each project after full discussion with our clients and our own design office. We offer a full design & draughting service using the latest 3D modelling software. Material certification, quality plans, procedures, employee certification and testing are available upon request, with third party Insurer witness testing where required. We offer a range of material finishes including bead blast, bright (mirror) polished, satine (brushed) polished and 2B.

P & I are a friendly, family-run business that specialises in critical power solutions. Founded in 1999, the company has grown to become a leading independent supplier of generators and UPS systems with a genuine commitment to quality and service. We ensure that even in the toughest of environments, you can trust that your power is protected. Depending on your needs, we offer the full end-to-end service including design, project management, installation, commissioning and dedicated service support. Generator Service & Maintenance: Our service contracts are aimed to give you peace of mind so you know that in the event of a power outage, you can rely on your critical power equipment. UPS Service & Maintenance: We offer a comprehensive and cost-effective range of service plans to ensure all parts of your UPS system remain fully functional and at optimal performance. Control Systems Services: We aim to make your solution fit both your current and future needs with bespoke design systems to meet your exact requirements. Critical Power Hardware: P&I have grown to become a leading independent supplier of generators and UPS systems. We work with the likes of Salicru and Riello. Projects: Our experienced project management team can support every stage of your project from start to finish. Let us do the leg work whilst you focus on your commitments. Hire: Our fleet includes 8 kVA to multi-megawatt generators, 100Kw to 2MW mobile load banks, together with many other hire solutions. Introducing the new Clean Power Industrial Range: Design, project management, installation, commissioning and dedicated service support for your critical power needs.

Established in 1864, Aerzen are an International market leader supplying Roots type blowers, screw blowers, screw compressors and Turbo blowers for water and waste water applications. Aerzen have extensive experience in aeration, RGF filter scour and digester/landfill gas positive displacement to the Water Industry. To this end they currently hold Supply Frameworks with many UK Water providers and have supplied all other UK and Irish Water Companies over many years.

FLI Precast Solutions (formerly FLI Carlow) provide design, engineering and manufacturing services for the off-site manufacture of specialist concrete infrastructure and attenuation systems. Our markets include Water, Wastewater, Energy and Storm Attenuation in the UK & Ireland and bespoke projects globally. SERVICES INCLUDE Design, engineering and manufacturing services for the off-site manufacture of specialist concrete infrastructure and attenuation systems. Design to national and international water industry standards and our semi-precast modular designs make us the industry leader in off-site concrete engineering and manufacture. By early involvement and integrating with our clients’ design teams we can accelerate and improve design optimisation and reduce cost. The value is in the solution, and off-site manufacturing and fabrication leads to higher efficiencies and lower risks and costs. Framework agreements enable us to add more value through collaboration, innovation, economies of scale, supply chain partnering and cost management. Our products and designs are engineered to provide solutions to many challenges facing our clients: water retention, water storage, water conveyancing, water management, water treatment, fire-resistance criteria, chemical resistance parameters, infrastructural products, retaining walls, coastal erosion, decorative walls, to name a few. We are a solutions provider using innovative off-site concrete engineering and our industry leading semi-precast modular designs. The company is part of the FLI Group which is a diversified group of companies providing environmental solutions, services and technologies to private and public sector customers in the UK, France, Ireland and throughout the world. PRODUCTS INCLUDE Service reservoirs Process settlement tanks (PST / HST / FST / etc) Storm & attenuation tanks (network or site based) Process structures (ASP / TSR / GAC / RGF / etc) MCC service foundations Bund wall system Chambers Channel & lids Comms chambers Multi-purpose chambers Bespoke culverts Holding tanks Barriers Demountable fence supports (international airport approved) Ballast blocks Dry flow channelling Foundation bases Blast fence supports

Unique integrated water solutions and unrivalled expertise. Suez Advanced Solutions UK deliver innovative methods of water and wastewater management throughout the UK. Working with a wide range of customers in the industrial and utility sectors, SUEZ Advanced Solutions UK are focussed on tailored and integrated process solutions for measurable results. Suez Advanced Solutions UK’s suite of environmental technologies and services deliver optimised methods of water network management for the water sector. Utilising a wealth and depth of experience in water and sewerage networks, a wide range of pioneering and innovative process solutions are now successfully providing commercial benefits to water companies, and improving service quality for the end user. Our industrial water specialists deliver bespoke solutions based on the specific needs and process requirements of the customer, to provide reduced costs, energy and water consumption. Committed to continuous development through technical innovation, Suez Advanced Solutions UK transfer knowledge and expertise from a diverse range of industrial sectors, offering a comprehensive understanding of processes and relevant environmental and industry legislations.

From concept to completion, Glenfield Invicta’s end-to-end Project Solutions provide market leading valve and penstock engineering excellence, across a multitude of water utility and non-water utility infrastructure projects. The company combines the strength and unique proposition of Invicta’s site solutions, penstocks, and environmental expertise, with Glenfield’s experience and expertise in specifying and managing large Dams, Reservoirs and Hydropower projects. Supported by the vast product portfolio from the AVK Group of manufacturing companies. We are market leaders distinguished by our industry expertise, we have been designing and manufacturing specialist engineered valves and penstocks for more than 170 years. We stand behind every product we install for life, offering some of the best extended warranties in the industry. Our experienced and multi-skilled project team work closely with our partners and key stakeholders to ensure your project is executed to exacting standards. Our long history in designing, supplying, and installing highly engineered valves and pipeline equipment in projects is what sets us apart. Our projects are delivered safely, on time, and to the highest standards in arduous applications. This specialist capability has made the our brands synonymous with engineering excellence worldwide. We have recently invested over £2m in our Kilmarnock facility which extends to over 200,000 sq. ft. of manufacturing, office, warehousing, and education space. It includes a new purpose-built Learning Academy; which will include an interactive visitor centre. We are committed to training the apprentices and engineers of the future.