Industrial Water Treatment

AECOM is one of the world’s leading multi-disciplinary engineering consultancy firms working for the water industry worldwide. Ranked third in the ENR rankings we work across all aspects of water infrastructure and delivery systems to ensure cost effective and quality design for all project elements. We are advising on the strategic implications of climate change and sustainability on water infrastructure and resources management as well as design new build facilities and rehabilitation of older assets to meet the needs of water providers across the UK. We provide framework support as well as advising on the implications of new technologies, energy management and investments for clean and wastewater processes.

If you knew there was a material out there with a proven track record worldwide for outperforming others, would you want to know more about it? Using cutting edge technology to meet the toughest challenges, Amiblu manufactures GRP pipelines and storage systems that last for generations and do not corrode. GRP is a resilient, composite material utilised in many aspects of construction and civil engineering to deliver long lasting infrastructure. The history of Amiblu’s GRP systems starts with the first production of centrifugal cast (CC) pipes in Basel in 1957 and continuous filament wound (FW) pipes in 1969 in Norway using top quality raw materials combined with glass fibres to create robust pipes and storage solutions. Over the past 60+ years, research and development, growth and investment now puts Amiblu at the forefront of GRP pipe production, with seven state of the art manufacturing facilities and a global network of licensed partners producing the two market leading names in GRP pipes – Flowtite (FW) and Hobas (CC). Amiblu takes environmental responsibility very seriously by developing systems that offer a number of benefits to asset owners who are faced with aging networks, growing cities, climate change and increases in demand. Challenging traditional materials, our products are corrosion and abrasion resistant, with excellent hydraulics, can be bespoke made to meet project requirements, are low-maintenance and engineered for 150 years’ service life. Products are manufactured for: Sewage & stormwater Hydropower Circular & non-circular pipeline rehabilitation Potable & raw water delivery Industrial processes Micro-tunnelling applications. The greenest product is the one you don’t have to replace.

Aquacycl is revolutionizing wastewater management with innovative, sustainable solutions that reduce operational costs and environmental impact. Our mission is to provide advanced technologies that address critical wastewater challenges for municipal, industrial, and agricultural applications.

Aquality is your specialised partner in industrial or marine water and fuel treatment processes. This includes know how, chemical products, dosing units but also measuring and control equipment.

Your partner in process techniques and water- and sludge treatment. From single process components to complete industrial water and sludge treatment installations. Voted as most sustainable business in the province of Drenthe.

Cirtec is a consultancy and engineering firm specializing in the processing of wastewater, waste, and biomass into useful products. Originating from TNO, Cirtec operates independently. Cirtec is an accredited Eco-innovation consultancy firm of the Dutch Ministry of Economic Affairs and Climate Policy.

Costain works with water and wastewater companies to shape, create and deliver pioneering solutions that improve water quality, affordability and resilience. Population growth, regulatory changes, energy costs and climate change are having a dramatic impact on water usage. The national approach to managing water supply is changing to meet these challenges. The Government and industry regulator are tasked with cutting wastage and preserving an increasingly valuable resource, while protecting consumers from higher water bills. The water sector team offers: Expert input into consultation documents, close work with Government and water companies and innovative delivery, all of which help to minimise costs to water users while meeting national investment needs. A manufacturing mindset: programme optimisation advisory services, standard product development, production controls, whole-life costing and lean delivery processes. Cross-sector best practice: we provide value for our clients by drawing on experience from across the company and by working closely with our decarbonisation experts to drive regional growth strategies. Technology integration: working with some of the UK’s leading asset and data analytics organisations we analyse large volumes of real time data to create greater benefits for our customers through optimised maintenance, pump operation, energy and chemical usage. Current water industry frameworks: Anglian Water – Strategic Pipeline Alliance Severn Trent Southern Water – CMDP JV Thames Water United Utilities – Maintenance Service Provider Yorkshire Water – Technical Services

Cotswold Valves forms part of the Flow Control Group. Covering a wide range of sectors including oil, gas, industrial, water, wastewater, sewage, chemical and power generation, the business provides consultancy services including product design, specification, selection, valve sizing, actuation, flow and pressure management, installation and the supply and retrofit of a full range of spares and replacement products. The Group’s Site Services division specialises in “On-Site” product support. We can undertake both new installations and carry out retrofit of valves and actuators to existing works. Where necessary we can act in a support capacity on client led installations The Flow Control Group incorporates fabrication and machining capabilities and can, in addition to the production of valves and penstocks, design and manufacture mounting kits, pedestals, drive bushes, spindles and other ancillary equipment. Our manufacturing facilities supply bespoke products in accordance with ISO 9001:2015 quality management systems. The business also operates to ISO 14001:2015 and ISO 45000:2018 standards operating to the highest Health & Safety and Environmental standards. Utilising our in-house actuation facility, we can assist with actuator selection, and can fit, set and test actuators prior to delivery. We can also fit actuators on site where necessary.

EB Critical Group comprises of two entities; EB Critical Engineering Services and EB Critical Compliance. Both teams are highly skilled and experienced and offer national coverage for the UK’s water industry. EB Critical Engineering Services offer engineering and operational support to the UK’s water industry and industrial sectors. The team specialise in supporting Thermal Hydrolysis Process (THP) projects and highly critical steam plants. offering services such as 24/7 shift based operational support and monitoring, Steam Boiler Water treatment as well as being distributors for products supplied by Grundfos and ARI-Armaturen. Services/ Products available: Multi-skilled Engineering and maintenance Process reviews and consultancy Water industry operational support (emergency packages available) Steam system operations and management Steam boiler water treatment Technical boiler house risk assessments Steam and hot water boiler hire solutions Distribution of associated sector products. EB Critical Compliance offer Fire Safety provisions and specialist consultancy services, helping clients achieve total compliance for their critical industrial assets. Services/ Products available: Fire Risk Assessments Fire Extinguisher Supply and Maintenance DSEAR Assessments Legionella Risk Assessments Noise Assessments Electrical Inspections Industrial Human Factors Consultancy and Training. General Health and Safety Consultancy and Training

ERG (Air Pollution Control) Limited is the leading supplier of wastewater odour control units (OCUs) for the UK Water Industry and increasingly supplies odour control systems around the world. In addition, ERG can provide specialist advice and solutions to assist in achieving IED compliance for relevant odour assets. In the past 10 years, we have provided over 200 OCUs and count all the UK water companies and major main contractors among our clients. So, whether you are looking for a large, multi-stage chemical scrubbing system, an environmentally friendly bio-trickling filter or bio-scrubber system, a simple but efficient activated carbon or dry media system, an Odorgard™ from ERG Hygrade, or even an RTO (Regenerative Thermal Oxidiser) system, ERG can develop a tailor-made solution to suit. All ERG Odour Control Systems are: Purpose-designed by our process engineers to eliminate the cocktail of inlet odours to the required standard. Optimised to give the best value capital and running costs. Built and tested to current BS EN and WIMES specifications. Guaranteed to achieve the required discharge odour concentration and supported by our skilled and experienced maintenance team. Minimising non-compliant emissions to atmosphere by regular, planned maintenance protects your reputation and saves you money. Our maintenance department can help keep your air pollution and odour control systems running effectively and at the lowest operating costs. Our specialist engineers are experts in maintaining most types of odour and air pollution control equipment and always work to the highest safety standards. We often save clients many thousands of pounds by repairing and enhancing dilapidated air pollution and odour control equipment. We are a framework supplier for odour control maintenance to Southern Water, Scottish Water and Thames Water, regularly maintaining more than 120 sites.

FLI Precast Solutions (formerly FLI Carlow) provide design, engineering and manufacturing services for the off-site manufacture of specialist concrete infrastructure and attenuation systems. Our markets include Water, Wastewater, Energy and Storm Attenuation in the UK & Ireland and bespoke projects globally. SERVICES INCLUDE Design, engineering and manufacturing services for the off-site manufacture of specialist concrete infrastructure and attenuation systems. Design to national and international water industry standards and our semi-precast modular designs make us the industry leader in off-site concrete engineering and manufacture. By early involvement and integrating with our clients’ design teams we can accelerate and improve design optimisation and reduce cost. The value is in the solution, and off-site manufacturing and fabrication leads to higher efficiencies and lower risks and costs. Framework agreements enable us to add more value through collaboration, innovation, economies of scale, supply chain partnering and cost management. Our products and designs are engineered to provide solutions to many challenges facing our clients: water retention, water storage, water conveyancing, water management, water treatment, fire-resistance criteria, chemical resistance parameters, infrastructural products, retaining walls, coastal erosion, decorative walls, to name a few. We are a solutions provider using innovative off-site concrete engineering and our industry leading semi-precast modular designs. The company is part of the FLI Group which is a diversified group of companies providing environmental solutions, services and technologies to private and public sector customers in the UK, France, Ireland and throughout the world. PRODUCTS INCLUDE Service reservoirs Process settlement tanks (PST / HST / FST / etc) Storm & attenuation tanks (network or site based) Process structures (ASP / TSR / GAC / RGF / etc) MCC service foundations Bund wall system Chambers Channel & lids Comms chambers Multi-purpose chambers Bespoke culverts Holding tanks Barriers Demountable fence supports (international airport approved) Ballast blocks Dry flow channelling Foundation bases Blast fence supports

Gearing Recruitment Solutions (GRS Ltd) is a leading technical recruitment agency with over 20 years of experience in the industry. Our team of experts specialises in providing white-collar permanent and freelance recruitment solutions for construction and water industries. We have supported large tier one M&E contractors through to local regional-based businesses in construction, ensuring that the companies we partner with share similar values and principles to us. This ensures that the candidates we place have the best opportunity to progress and develop in their careers. In the water industry, we have extensive experience in MEICA engineering for large industrial contracts and have recruited for top Tier 1 civils and infrastructure companies within construction, maintenance, and consultancy engineering. We have also partnered with large and regional MEICA contractors to provide recruitment solutions for AMP frameworks across the UK, including Thames Water, Southern Water, Severn Trent, United Utilities, and Scottish Water. Our recruitment services include positions such as: M&E Construction: Senior Appointments/Directors M&E Operations Manager Mechanical Project or Contracts Managers Electrical Project or Contracts Managers M&E Estimators, M&E Quantity Surveyors M&E Supervisors M&E Managers for main contractors Water: Directors Framework Managers Proposal Managers/Estimators, MEICA Managers MEICA Project Engineers Mechanical Supervisors Electrical Supervisors Quantity Surveyors Design Engineers/CAD Commissioning Engineers Process Engineers Health & Safety Sub Agents Civil Engineers At GRS, we pride ourselves on our honesty, true partnership, passion for our sector, and a continuous ambition to improve our technical knowledge. This allows us to perfectly position ourselves to cover all of your recruitment needs.

Hydro International, a CRH company,  provides advanced products, services and expertise to help municipal, industrial and construction customers to improve their water management processes, increase operational performance and reduce environmental impact. Hydro International can help water companies meet their AMP and environmental obligations, including the reduction of sewer overflows and the Water Industry National Environment Programme (WINEP). Hydro International provides total solutions for Inlet Works, Combined Sewer Overflows (CSOs), Stormwater Management, Flood Warning and Prevention, and Water Resource management, from design to supply and installation through to ongoing preventative maintenance, servicing and emergency repair.  These solutions include: Hydrometric data collection, monitoring analysis and reporting for river level, reservoir, network and weather. Continuous water quality monitoring for compliance with Section 82 of the Environment Act. Water resource analysis and consultancy. Stormwater management solutions, including options for Sustainable Drainage Systems. (SuDS) and Smart Maintenance. CSO event duration monitoring. CSO and storm tank treatment and screening. Passive flow controls for flood prevention schemes, SuDS, CSOs and WwTWs. Inlet works screening and grit removal solutions. Sludge screening. Dropping sewage or water safely from height. Hire, repair and maintenance of inlet works screens and screenings handling equipment

Lloyd Morris Electrical Limited is a company of electrical engineers, specialising in the design, manufacture and installation of electrical distribution and control systems for industrial and commercial applications. Having established the company in 1974, it has since developed in to a well-recognised and reputable organisation within the industry and is keen to develop professional and pro-active relationships with its clients. LME offers Design for Manufacture and Assembly (DfMA) across the complete electrical service supply. The off-site manufacture of pre-assembled and cabled low voltage switch/plant rooms offers significant benefits in relation to safety, quality, cost and program. Control panels LME pride ourselves in being at the forefront of control panel manufacturing. LME have an unrivalled level of expertise and service, and we make sure that all our control panels are designed and built to match your exact requirements. LME provide control panels constructed from Form 1 through to Form 4. With our control panels we consider the space available and all special site requirements. We can supply off the shelf or bespoke steelwork so that each order can be custom built to specific requirements and comply with your general and exact specifications. Intelligent design motor control centres minimise the number of components required as various functions are integrated into single intelligent devices. LME offer intelligent motor control centres manufactured to the same construction range as our conventional units which are all bespoke and are BS EN61439-1&2 compliant. LV switchboards LME manufacture bespoke LV switchboards, each assembly can be custom built to specific requirements and comply with client’s exact specifications providing LV switchboards constructed from Form 1 through to Form 4, Type 1 to Type 7. With our LV switchboards, we can accommodate various types of cable entries whether top, bottom or a mixture of both, front or rear access, or we can even manufacture a hybrid solution using a combination of any form and type. Electrical design An important aspect in the development of any project is the design and provision of professionally presented documentation. Therefore, to meet the varying needs of each client, our team of draughtsman are well equipped with the latest AutoCAD systems. Our project engineers use software tools to perform cable and lighting calculations, cable and instrumentation scheduling, rating of protection devices, and overall contract programming and scheduling. Electrical installations LME have the resource, capability, and experience to provide a complete electrical installation, for any water plant or factory. With a large, fully qualified, and competent workforce combined with an extensive fleet of vehicles, no task is too large and no location too remote. With this structure and experience, we can offer a comprehensive range of installation services covering locations throughout the United Kingdom. Systems integration To provide a fully integrated approach to projects, the company has the facility to develop complex and highly structured software. Our systems engineers have considerable experience in all aspects of software design and development, ranging from basic PLC systems and HMI/SCADA, controlling process and manufacturing plant, through to commercial and industrial databases and high-level management information systems (MIS), producing essential business information.

Established in 1963, McAdam engineer sustainable solutions which transform communities and enhance our natural environment. We provide a wide range of services to support the realisation of our client’s projects, both in-house and with the support of our trusted supply chain. Supporting our technical expertise, we have in-house safety and project management professionals who bring a collaborative and proactive approach to project delivery. We offer a wide range of full project lifecycle services across a variety of engineering sectors including: Water supply and treatment. Wastewater collection, treatment, disposal and sludge management. River & coastal catchment management. Surface water and drainage. Civil Infrastructure and environmental improvement schemes. Recognising that our lived environment is facing rapid change we are developing and delivering solutions that seek to protect the natural and built environment and enhance our community’s wellbeing. We help our clients tackle issues and build resilience to growing populations, climate change, pollution, and changing lifestyles. We help them achieve regulatory and legislative compliance within constrained economic times. This is achieved through collaborative engineering excellence, innovative thinking and strong programme and project management. Our approach to delivery of affordable and sustainable solutions is built upon teamwork and creation of long-term collaborative partnerships with our clients, construction partners and specialist supply chain members. The success of our approach is demonstrated by the longevity of our position on key frameworks and the breadth and scale of projects we have delivered over the past 60 years. Our engineering team has significant experience in client led investigations, feasibility studies, concept designs, strategic procurement advice and construction project management. The knowledge and expertise gained from that experience is successfully applied to detailed design services for traditional construction projects, part of design & build partnerships, and in more collaborative delivery models which use Early Contractor Involvement to drive innovation, risk reduction and TOTEX efficiencies. As part of our multi-disciplinary practice we also offer in-house architecture, project management, Health & Safety advisor, principal design, project supervisor, and design process services to supplement our engineering capabilities.

With over a 200-year legacy to build on, MWH Treatment has worked to define the past and is continually working to shape a better future. We pride ourselves on being the most partnered company in the water treatment sector. To be able to claim that, you truly need collaboration at the heart of your organisation. We operate across the UK water industry with over 800 process intelligent, multi-disciplined, engineering, procurement, delivery and commissioning professionals. Our teams are co-located across six major Frameworks, including integrated Joint Ventures and Alliances, supported by our Manchester based support services centre. Our truly integrated design delivery culture provides a complete range of end-to-end services for all water and wastewater solutions from major programmes and projects through to minor capital delivery maintenance, process optimisation and operations. In addition, our’s 100 strong multi-trade, direct workforce provides us with an increasing self-delivery capability. This combines efficiently with our established and critical supply chain, providing a productivity focus crucial to delivering value across smaller capital maintenance projects. We constantly push innovation and collaboration boundaries, including our internationally awarded Digital Delivery strategy, supporting our clients in outperforming their regulatory challenges.

Oprins Hengelo is an installation company specializing in industrial installations. Oprins supplies piping, equipment, and installations for the process industry and water treatment, among other things.

Pipelife is an established and well respected supplier of polyethylene pipes and recognised as a global leader in the supply of long length extruded solid wall PE pipes. Our long length extruded pipes are produced by Pipelife Norge in Norway. The large, high-quality pipes are extruded at our Stathelle plant using premium PE100 resins and strict factory quality controls. Each pipe is made to order through a seamless, continuous extrusion process that eliminates welds and extends directly from the factory into the fjord. From there, the pipes are transported by tugboat straight to their destination, removing the need for land storage or extensive working areas. This efficient production and delivery method not only ensures exceptional durability and precision but also reduces handling and lowers the overall carbon footprint, making Pipelife a reliable partner for major infrastructure projects worldwide. Located on the shore of a sheltered fjord, Pipelife’s Stathelle plant offers the ideal setting for producing long-length pipes. Its coastal position allows continuous production in a clean, controlled environment with direct access to the sea, meaning pipe lengths are limited only by the fjord’s size and the pipe’s diameter. The facility is equipped with extensive storage areas on both land and water, along with a dedicated wharf for easy loading by ocean-going tugs. Supported by Norway’s reliable infrastructure, the plant benefits from a stable energy supply and consistent access to essential raw materials. Inside, a state-of-the-art production line, enhanced with specialized modifications, ensures the highest manufacturing standards and delivers unique advantages in product quality and performance. Pipelife’s long-length, large-diameter pipes are designed for a wide range of demanding applications, including: Wastewater sea outfalls and diffusers Desalination and power plant intakes and outfalls Cable landfalls Cable protection systems Horizontal directional drilling (HDD) liner ducts Fish return lines

Rotork is a market-leading global provider of mission-critical intelligent flow control solutions for the industrial actuation and flow control markets. We operate across three divisions: oil and gas, water and power, and chemical, process and industrial (CPI). We are a global company with 3,300 employees serving 170 countries.

SEEPEX is a leading worldwide specialist in the design, manufacture and application of progressive cavity pumps, macerators and digital solutions which optimise uptime and reduce downtime to give an optimal TOTEX solution. Our products and expertise are applied in most applications in the wastewater industry wherever thin to highly viscous and high % DS media is conveyed. Each solution is custom-configured to suit our customers’ requirements. Pump Technology 4.0 SEEPEX Digital Solutions incorporating the Pump Monitor turn the progressive cavity pump into an intelligent field device, operating in a networked system of smart products, services and processes. SEEPEX cloud-based service provides online remote monitoring and management of the pumps and process. Data collection and advanced analytics enable process and pump optimisation and reduce inspection, downtime and operating costs, facilitating predictive maintenance and timely delivery of spare parts to improve overall equipment and plant efficiency. Unlocking the Power of Digital Our latest innovation, the most intelligent progressive cavity pump in the world, allows remote adjustment to maintain pump performance without onsite manual intervention. With SEEPEX unique SCT AutoAdjust technology, combined with our digital solutions, site visits for maintenance are eliminated and access to otherwise hard to reach pump installations can be carried out remotely. Energy Efficient Long Distance Pumping of Dewatered Sludge Our dewatered sludge handling solutions include Smart Air Injection (SAI) technology, an energy efficient system delivering energy savings of approximately 40% by combining a progressive cavity pump with pneumatic dense phase conveying to transport 14-40% DS sludge over long distances up to 1,000 meters. This alternative to conventional technologies has proven to significantly reduce operational (energy, spare parts and downtime) and total investment costs. Patented Solutions for Smart Maintenance. Fast and Simple. SEEPEX continues to extend its world class portfolio of maintain-in-place technologies for pumps with capacities up to 300m3/hr and 48 bar, able to handle flowable to highly viscous products with a high % DS content. The new patented BNM range has been designed to simplify customers’ maintenance and can reduce maintenance time by up to 80% with a significant reduction in related costs. SEEPEX latest ease of maintenance solution for big pumps complements our Smart Conveying Technology (SCT), launched in 2008 and still setting standards in the maintenance of smaller standard progressive cavity pumps, and Drive Joint Access (DJA) technology for open hopper pumps. All of these patented solutions increase uptime and plant availability.