Treatment Technologies
Dosing Pump & Chemical Feed Companies
Diaphragm, peristaltic, and metering pump manufacturers for accurate chemical feed in water systems.
This page is a good fit if you need:
- Granular Activated Carbon (GAC) Filters or Fixed Bed Activated Carbon Adsorbers capabilities
- Suppliers with manufacturing sector experience
- Providers operating in United Kingdom or Netherlands
- Providers
- 99
- Verified
- 5
- Countries
- 15
Can't find the right fit? Post a brief and let qualified suppliers come to you.
Post a projectHow to choose a dosing pump & chemical feed provider
Start with providers that clearly operate in your target geography and project footprint.
Look for industry exposure that matches your water challenge, compliance constraints, and deployment context.
Use technologies, service scope, and proof signals to narrow the list before reaching out to suppliers.
Not sure where to start? Our experts can help.
Filter results
Verified providers
5 claimed companies in this category
Country
Industry
Technology
Find a Dosing Pump & Chemical Feed Provider
Showing 1-20 of 99
99 results from 99 matched providers
Specifying Chemical Dosing Pumps for Water and Wastewater Service
Chemical dosing pumps inject coagulants, polymers, chlorine, sodium hypochlorite, caustic, acid, antiscalant, and corrosion inhibitors at flow rates from 0.1 mL/min to over 1,000 L/h against backpressures up to 20 bar. Three core technologies dominate: solenoid-driven diaphragm pumps (low capacity, simple, plus or minus 5 percent accuracy, ISO 15783 compliant), motor-driven mechanical diaphragm pumps (medium capacity, plus or minus 1 percent accuracy, API 675 compliant for heavy duty), and peristaltic hose pumps (handles abrasive slurries, no seals, plus or minus 2 percent accuracy). Material selection follows the chemistry: PVDF and PTFE for hypochlorite and acids, PVC for caustic, 316SS for hot polymer, EPDM hose for lime slurry.
Sizing must account for stroke length, stroke frequency, and backpressure curve, plus 25 to 30 percent margin for diaphragm degradation. Specify NSF/ANSI 61 certification for any pump dosing into potable water and ATEX/IECEx Zone 1 for explosive atmospheres around chlorine gas or hydrogen-generating electrolysis. Pulsation dampeners and calibration columns are mandatory accessories; without them, true flow can deviate from setpoint by 15 to 25 percent. Modern pumps integrate 4-20 mA flow-pacing, MODBUS RTU, and Profibus signals so dosing tracks plant flow in real time per AWWA M20 chemical-feed guidance.
Aguato lists dosing-pump suppliers across solenoid, motor-driven, peristaltic, and packaged-skid categories. When shortlisting, demand reference installations at your chemistry, flow range, and backpressure; ask for spare-parts kits stocked locally; and verify the supplier offers commissioning, calibration, and tube or diaphragm replacement service contracts. A pump that fails on a Sunday at 02:00 in a chlorine room without local stock is a compliance event waiting to happen.
Frequently Asked Questions
What is the difference between solenoid and motor-driven dosing pumps?
Solenoid pumps pulse via an electromagnetic coil; they are cheap, compact, suit 0.1 to 20 L/h at under 10 bar, hit plus or minus 5 percent accuracy, and run-dry capable for short periods. Motor-driven mechanical or hydraulic diaphragm pumps (API 675) deliver 5 to 2,000 L/h at up to 20 bar with plus or minus 1 percent steady-state accuracy and 20,000-plus hour MTBF, justifying their 3 to 5x higher cost for continuous-duty municipal and industrial service. Use solenoid for cooling-tower antiscalant; motor-driven for primary disinfection of a 50 MLD WTP.
How do I choose the right dosing pump material for sodium hypochlorite?
Sodium hypochlorite (12.5 percent trade-strength bleach) degasses chlorine and oxygen, attacks elastomers, and embrittles many plastics. Wet-end specification: PVDF or PTFE diaphragm, ceramic balls, PTFE/FKM-CF seats, and PVDF or borosilicate-glass head. Avoid Viton (degrades), 316SS (pitting corrosion), and Hastelloy (cost-prohibitive vs PVDF). Always specify a degassing valve at the discharge to vent O2/Cl2 bubbles that would otherwise cause vapor lock and dose-rate collapse, a common root cause of disinfection failures.
What flow accuracy can I expect from a chemical dosing pump?
Manufacturer spec sheets typically claim plus or minus 1 to 5 percent reproducibility under steady-state lab conditions. Real-world accuracy depends on suction lift, backpressure stability, viscosity, and degassing. Install a calibration column on the suction side and verify monthly per AWWA M20; install a pulsation dampener sized to at least 10x stroke volume to suppress pressure spikes that destroy injection-point check valves. With these accessories, plus or minus 2 to 3 percent field accuracy is achievable; without them, plus or minus 15 percent drift is normal.
When should I specify a peristaltic dosing pump instead of a diaphragm pump?
Peristaltic (hose) pumps shine on abrasive slurries (lime, polymer-coated PAC, ferric chloride with grit), shear-sensitive polymers, and fluids prone to crystallization that would clog check valves. They have no seals or valves in contact with fluid; the hose is the only wear part, replaceable in under 30 minutes. Limitations: max backpressure typically 16 bar, hose life 2,000 to 8,000 hours depending on chemistry, and pulsation is more pronounced than diaphragm. Specify NBR for hydrocarbons, EPDM for caustic and lime, and Hypalon for hypochlorite.
A Thames Valley drinking water works dosing sodium hypochlorite at 50 MLD suffered repeated disinfection shortfalls: solenoid pumps at the primary chlorination point were causing plus or minus 20 percent dose variation, breaching the DWI Regulation 28 residual chlorine floor of 0.1 mg/L at zone entry. The site had no calibration columns and no pulsation dampeners.
Replaced solenoid pumps with API-675-compliant motor-driven PVDF diaphragm pumps sized for 2 to 8 L/h at 10 bar. Installed calibration columns with totalizing flow meters on each suction line. Added PTFE pulsation dampeners at 10x stroke volume. Integrated 4-20 mA flow-pacing from the plant's flow transmitters via MODBUS RTU to the pump controllers. Specified NSF/ANSI 61-certified wetted parts and ATEX Zone 2 motors.
Dose variation reduced from plus or minus 20 percent to plus or minus 2 percent. DWI Regulation 28 residual chlorine compliance achieved consistently. Chemical consumption fell 8 percent through elimination of overdosing. MTBF improved from 4 months (solenoid) to over 24 months (motor-driven), removing Sunday-night callout as a recurring event.
Questions to Ask Shortlisted Providers
- 1
What NSF/ANSI 61 certification covers the wetted components of this pump for potable water service?
NSF/ANSI 61 certification is required for any device dosing into or in contact with potable water under UK WS(WQ)R 2016 and WRAS. Confirming the scope of the certificate (head, diaphragm, check valves, tubing) prevents non-compliant materials entering supply.
- 2
What is the declared dose accuracy at our specific backpressure and chemistry?
Manufacturer data sheets quote accuracy under lab conditions. Asking for field data at your actual backpressure range and fluid viscosity reveals real-world performance, which determines whether a calibration column and pulsation dampener are required.
- 3
What is the rated MTBF for the diaphragm or hose at our chemistry and temperature?
Diaphragm life is highly chemistry-dependent. PVDF diaphragms in hypochlorite at 12.5 percent may last 12 to 24 months; EPDM in lime slurry 6 to 18 months. MTBF drives your spare-parts budget and planned maintenance intervals.
- 4
Does the pump support 4-20 mA flow-pacing and MODBUS RTU, and is firmware fieldupgradeable?
Flow-pacing via 4-20 mA is the AWWA M20 standard for matching dose to plant flow. MODBUS RTU integration into SCADA gives dose audit trails required for DWI and EA compliance logging. Firmware upgradeability protects the investment as plant control systems evolve.
- 5
What is the minimum order lead time for diaphragms, check valves, and hoses from your UK or EU warehouse?
A dosing pump failure at a primary chlorination point is a compliance event. If spare parts require 4-week lead time from an overseas factory, the risk profile is very different from a supplier holding stock in the UK. Confirm stocked spares before award.
What Drives Cost in This Category
Solenoid pumps cost 300 to 800 GBP per unit; motor-driven diaphragm 1,500 to 8,000 GBP; peristaltic 2,000 to 12,000 GBP for high-flow models. Higher upfront cost of motor-driven units is typically recovered in 2 to 4 years through reduced maintenance frequency and improved dose accuracy.
Standard PVC head pumps cost 30 to 50 percent less than equivalent PVDF or Hastelloy-C heads. For aggressive chemistries (hypochlorite, HCl, caustic), spending on PVDF or PTFE-lined heads avoids premature failure and contamination risk that dwarfs the material price premium.
Pumps with basic on-off control cost 20 to 30 percent less than models with 4-20 mA pacing and MODBUS RTU. Integration to SCADA requires additional marshalling panels and programming. However, manual batch dosing on a 50 MLD works creates compliance exposure worth far more than the control upgrade cost.
Accessories add 200 to 800 GBP per pump but are mandatory for AWWA M20 compliance and accurate dosing. Omitting them often results in 10 to 25 percent dose error and injection-point check valve failures within 6 to 12 months, generating disproportionate reactive maintenance cost.
Key Regulations & Standards
Water Supply (Water Quality) Regulations 2016 require water companies to maintain a minimum free chlorine residual of 0.1 mg/L at all points in the supply zone (Regulation 28). Dosing pumps that cannot maintain consistent dose accuracy directly risk regulatory breach, with DWI enforcement action including Regulation 28 notices and public reporting obligations.
Any pump, tubing, diaphragm, or check valve in contact with water intended for human consumption must be certified under NSF/ANSI 61 (North America) or WRAS-approved to BS 6920 (UK). DWI Approved Products Guidance lists acceptable materials for water contact. Non-compliant wetted materials must be removed and replaced, with potential consumer notification obligations.
Sodium hypochlorite dosing rooms may be classified ATEX Zone 2 due to chlorine gas release on spillage or container failure. Pump motors, control panels, and electrical accessories in Zone 2 areas must carry IECEx or ATEX II 2G certification. The Dangerous Substances and Explosive Atmospheres Regulations 2002 require a formal zone classification and ATEX equipment schedule.
Sites storing sodium hypochlorite above 200 tonnes (as active chlorine equivalent) fall under the Control of Major Accident Hazards Regulations 2015 (Lower Tier) or above 200 tonnes as chlorine equivalent (Upper Tier). COMAH sites must notify the HSE/EA Competent Authority and prepare Major Accident Prevention Policies. Most WTPs fall below COMAH thresholds but must still complete DSEAR risk assessments for chemical dosing areas.
Explore Related Categories
Related Hardware
Browse the full provider directory
Comparing dosing pump & chemical feed companies is one slice of a larger shortlisting decision. Explore the complete directory of water treatment suppliers, then filter by region, sector, and technology before you request scoped proposals.
Open the directory