Digital & Smart Water Technologies

Barhale is a civil engineering and infrastructure specialist with more than 40 years’ experience in the construction industry. Founded by chairman, Dennis Curran in 1980, the group was originally set up as a tunnelling contractor. While retaining its tunnelling roots, repeated success across several sectors of the construction industry has enabled the company to expand to become one of the largest privately-owned infrastructure experts in the UK. We work UK-wide across the water, energy, transport and built environment sectors providing design, construction and maintenance services under long-term contracts with blue chip public, regulated and private clients. The company has an outstanding reputation for the range of specialist skills it possesses to support its civil engineering and infrastructure activities including MEICA and a steel-fabrication and supply subsidiary.

BSG Civil Engineering Ltd has developed from a civil engineering contractor to the present construction company with a turnover of approximately £45 million of which 90% is based in the design and build sector. BSG’s principal client is NI Water, however the company has shown its ability to adapt to differing client needs by successfully undertaking multi million pound contracts for clients such as the Belfast Harbour Commission, Donegal County Council and DARD among others. Originally formed in 1987 Seamus Gillan Civil Engineering diversified into sheet pile driving, in 1993, to facilitate and enhance the company delivering Civil Engineering projects for the Water Service and Rivers Agency. This diversification led to the formation of BSG Piling Ltd. In 2004 it was decided that Seamus Gillan Civil Engineering due to the value of the turnover should become limited and hence Seamus Gillan Civil Engineering and BSG Piling Ltd amalgamated to form BSG Civil Engineering Limited.

Cadman Cranes is a leading provider of lifting solutions in the UK with over 50 years’ experience and a reputation for quality, reliability and safety. At the very forefront of sustainability within the industry, Cadman Cranes offer responsible and collaborative turn-key solutions across all industries. From depots in Colchester and Brentwood, Cadman is ideally positioned to cover the East of England and beyond, living and breathing its mission to provide safe lifting solutions to industry and communities in a collaborate, considerate and sustainable way. Cadman has always placed great importance on delivering so much more than just crane hire. Its values are focussed on the success of its clients, its people and its community, and it takes great pride in going the extra mile on every job, no matter how big or small. Cadman Cranes add value to your hard work and offer a full-service lifting solution that goes far beyond just crane hire. It doesn’t just look for customers, it looks for partnerships based on trust, quality and safety. Services include: Contract lift services: Our complete package service is ideal for those who require a fully managed lifting solution, removing your risk and liability, and ensuring that we deal with all of the ‘heavy lifting’. Crane hire services: Cadman Cranes is the leading crane rental company in the East of England, providing crane hire across London, Essex, East Anglia, and all over the UK. With cranes available 24/7, 365 days a year, we are well positioned to keep your operations moving. Tank clearance, dredging, and grab solutions: Cadman Cranes offers innovative tank clearance solutions with our custom-designed grab attachment. The remote-controlled grab, mounted to the hooks of our mobile cranes, can reach up to 60 meters and handle a variety of materials, including sewage waste, sludge, grit, mud, and sand. This service is ideal for wastewater treatment plants, sewage facilities, digester tanks, aeration tanks, ports, and any industrial sites that require regular tank cleaning, maintenance, or dredging. Specialist lifting equipment for utility installation projects: Utilising our range of specialist lifting equipment, we have assisted on some of the most complex utility installation projects throughout the East of England, solving problems currently unimaginable by other mobile crane hire companies. Our innovative Compact Crawler Cranes, in combination with our remote-controlled telescopic hydraulic grab, have proved invaluable in providing the highest level of service and crane hire to the utilities sector. If you would like to work with Cadman Cranes or are looking to add a safe and considerate crane hire solution to your list of approved suppliers, Cadman would love to hear from you.

Specialists In odour control and dust suppression Cobra Hydro UK is a fast-expanding company for the design, manufacture and installation of odour control systems, sludge dosing applications and dust suppression requirements across the United Kingdom and most recently, internationally. We are a family-owned business, designing and manufacturing all our equipment and blending our neutralisers. We have been providing odour control and dust suppression solutions for over 20 years. Protecting the environment is always at the forefront of our minds. We therefore use environmentally friendly products such as Atom Neutraliser, which is used not only for odour control equipment, but also in the food industry. Cobra Hydro UK has designed a waterless odour control system that works with vapour instead of water. This gives customers a water saving option. At Cobra Hydro UK, we are always striving for new innovative ways to protect the environment. Cobra Hydro UK employs qualified personnel for the manufacture and installation of equipment. All equipment is produced in house and made to a high standard. We carry out full site surveys and consult with the client at every stage of the process to ensure all requirements have been met. If required, we can also design one-off units to meet the client’s specific criteria.

Concrete Repairs Limited (CRL) is a specialist asset maintenance contractor who is here to help you with the inspection, repair & refurbishment of your concrete water assets. CRL provide comprehensive repair and refurbishment services tailored to the needs of the water and wastewater sector throughout the UK. These include the inspection, repair, refurbishment and upgrading of service reservoirs, contact tanks, water towers & wastewater treatment plants. With over 65 years of experience, CRL understands the importance of maintaining water quality and supply to customers. Therefore, when planning repairs, we prioritise effective programming of the work and optimal utilization of the assets being repaired. Our choice of repair methodologies and materials always reflects this commitment. At CRL, we pride ourselves on being a reliable partner to the water companies. We collaborate closely with them to identify problems early, quantify the necessary repairs, and establish a timeline for refurbishment. Throughout this process, we focus on ensuring the longevity and optimal performance of the assets. CRL provide proven and successful cost-effective repair and refurbishment options which meet our clients’ objectives of upgrading and increasing the life of their structures. CRL is capable of undertaking individual projects of up to £20M, either under competitive tender, or through Partnering/Framework arrangements. Our broad experience across various sectors ensures we deliver efficient, robust, and technically advanced services.

EB Critical Group comprises of two entities; EB Critical Engineering Services and EB Critical Compliance. Both teams are highly skilled and experienced and offer national coverage for the UK’s water industry. EB Critical Engineering Services offer engineering and operational support to the UK’s water industry and industrial sectors. The team specialise in supporting Thermal Hydrolysis Process (THP) projects and highly critical steam plants. offering services such as 24/7 shift based operational support and monitoring, Steam Boiler Water treatment as well as being distributors for products supplied by Grundfos and ARI-Armaturen. Services/ Products available: Multi-skilled Engineering and maintenance Process reviews and consultancy Water industry operational support (emergency packages available) Steam system operations and management Steam boiler water treatment Technical boiler house risk assessments Steam and hot water boiler hire solutions Distribution of associated sector products. EB Critical Compliance offer Fire Safety provisions and specialist consultancy services, helping clients achieve total compliance for their critical industrial assets. Services/ Products available: Fire Risk Assessments Fire Extinguisher Supply and Maintenance DSEAR Assessments Legionella Risk Assessments Noise Assessments Electrical Inspections Industrial Human Factors Consultancy and Training. General Health and Safety Consultancy and Training

ELIQUO HYDROK works with all major UK and Ireland water companies, providing practical water engineering solutions. As a specialist engineering firm with head office in Indian Queens, ELIQUO HYDROK operates at the forefront of innovative and sustainable water treatment technologies. We support the entire UK water sector, supplying every water company. Part of ELIQUO WATER GROUP, the extensive portfolio includes solutions for wastewater management, wastewater treatment, clean water treatment and surface water management; Mecana PCMF, aeration technologies, CSO screens, flow controls, storm tank flushing and Raw Water Intake Screens. Plus, a sludge treatment portfolio that helps reduce costs, improve efficiency, and meet environmental compliance requirements – through systems like ELOVAC® for vacuum degassing, and other integrated technologies in biogas, digestion, dewatering and drying. With established teams in Cornwall, Wolverhampton and Wombwell, ELIQUO HYDROK are well-equipped to support operations – from start to finish; with design, manufacture, management and install capabilities – across the UK and Ireland. This wealth of in-house expertise is backed by a forward-thinking mindset to help customers achieve their long-term goals sustainably; to deliver results in AMP 8 and beyond.

Environmental Techniques was established in 1992 to provide trenchless drainage inspection, cleaning and rehabilitation throughout the United Kingdom and Ireland, with offices in Northern Ireland, Scotland and the Isle of Man. Our fleet of inspection vehicles provide surveying services for wastewater network assets including CCTV surveys, sonar surveys, manhole mondition and dimensional surveys, dye tests and impermeable area surveys. Our jetting rigs provide cleaning, unblocking and degreasing of sewers and culverts. We also provide services for pipeline rehabilitation including CIPP lining, localised patch repairs and GRP lining. In 2017 Environmental Techniques became part of the Aegion Corporation which recently in 2024 rebranded as Azuria Water Solutions. As part of Azuria Water Solutions, Environmental Techniques have further developed their technical capabilities through the use of carbon fibre reinforced polymers and drone survey technology. Environmental Techniques continue to push the boundaries of CCTV surveys and investigation through the use of drone and LiDAR technology. Environmental Techniques work closely with clients to understand the needs in advance of carrying any work out. With close liaison and good communication, Environmental Techniques are able to provide savings and benefits to clients on a regular basis. Specialising in: Sewer cleaning & desilting CCTV surveys Flow monitoring & IAS surveys CIPP lining Robotic cutting CFRP Manhole surveys Man entry surveys Patch repairs Manhole rehabilitation Man entry pipe & culvert rehabilitation

GEDA Construction is a leading Building and Civil Engineering Company. Our technical expertise coupled with a committed personal approach has contributed to our continued success in the delivery of high quality projects. Since the 1970’s GEDA has been providing a comprehensive building and civil engineering services offering construction excellence to private and public sector clients across the UK and Ireland. We specialise in water and wastewater infrastructure including reservoirs, water and wastewater treatment works, shafts, tunnels and pipelines as well as educational, residential, community and industrial markets. With expertise across a wide variety of disciplines, we provide our clients with innovative and imaginative solutions that meet their needs in a safe, sustainable and cost-effective way.

Hayes GFS Ltd are recognised throughout the water industry as experts in the supply, installation and refurbishment of glass-fused-to-steel tanks, epoxy coated tanks and stainless steel tanks, from anaerobic digesters to potable water storage solutions to Nerada tanks. Our experience as framework suppliers to many UK water companies and having worked on projects throughout the Europe, America and the Middle East, has given us an unprecedented insight into the needs and demands of a variety of distinguished clients. Services include: The supply and installation of Permastore glass-fused-to-steel tanks and silos, fusion bonded epoxy, stainless steel tanks and GRP roofs. On-site tank surveys and condition reports. Emergency repairs. Refurbishment and replacement of existing tanks and roofs. Design, manufacture, supply and retrospective fitting of all tank related ancillaries, including access steelwork, decant pipework, tank Insulation and cladding.

Headlight AI is a UK based technology company developing sensing, mapping, and inspection solutions for extreme environments. The company works primarily with Utility companies and contractors to provide condition assessment and geo-location data in subterranean locations, especially for large diameter assets (such as sewers, culverts, and tunnels with diameters >900mm), with a focus on autonomous or semi-autonomous systems that avoid the need for person-entry (in particular NC3 or NC4 confined space entry), improving workers’ health and safety. The company supplies its award winning product, Telesto, to utility companies and contractors in order for them to collect multi-sensor data, including LiDAR, on either robotic or floating platforms. The data is then processed to account for the motion of the system and to produce 3D point cloud and multi-image data for further analysis. Users can access the information via the web-based Telesto application, which provides condition assessment dashboards and statistics relevant to the asset, achieved using novel artificial intelligence (AI) models. The company currently has several other products and features in development to further assist with underground inspections and surveys, and provide new ways to navigate and locate in GPS-denied and extreme environments.

Hydro International, a CRH company,  provides advanced products, services and expertise to help municipal, industrial and construction customers to improve their water management processes, increase operational performance and reduce environmental impact. Hydro International can help water companies meet their AMP and environmental obligations, including the reduction of sewer overflows and the Water Industry National Environment Programme (WINEP). Hydro International provides total solutions for Inlet Works, Combined Sewer Overflows (CSOs), Stormwater Management, Flood Warning and Prevention, and Water Resource management, from design to supply and installation through to ongoing preventative maintenance, servicing and emergency repair.  These solutions include: Hydrometric data collection, monitoring analysis and reporting for river level, reservoir, network and weather. Continuous water quality monitoring for compliance with Section 82 of the Environment Act. Water resource analysis and consultancy. Stormwater management solutions, including options for Sustainable Drainage Systems. (SuDS) and Smart Maintenance. CSO event duration monitoring. CSO and storm tank treatment and screening. Passive flow controls for flood prevention schemes, SuDS, CSOs and WwTWs. Inlet works screening and grit removal solutions. Sludge screening. Dropping sewage or water safely from height. Hire, repair and maintenance of inlet works screens and screenings handling equipment

Started in 1955, KEE design, manufacture, supply, install, commission and service off mains drainage products, including pumps and pumping equipment, septic tanks and sewage treatment plant products. KEE also offer full evaluation and design through their nationwide servicing team, offering fully integrated plant operation, an out-of-hours call centre, treatment plant refurbishment, upgrades and plant hire. KEE’s expertise in design, manufacture, servicing, refurbishment, maintenance and operation of equipment for all types of wastewater treatment plants is backed by over 65 years of experience and over 350,000 installations worldwide. KEE provide quality engineered wastewater treatment solutions priced to offer value for money. Continuing investment in R&D ensures that the products and services supplied by KEE incorporate the latest technology to protect the environment. TREATMENT SOLUTIONS & SERVICES Rotating Biological Contactor (RBC) Wastewater Treatment Systems KEE NuDisc® & NuDisc-R® single piece packaged RBC treatment plants capable of treating populations up to 1,000 in a single packaged plant. Modular packaged DC/DN RBC treatment systems. Large diameter RBCs for site erection. Submerged Aerated Filters Modular packaged and single piece KEE NuFlow treatment systems for domestic applications up to 50 PE. Activated Sludge Systems Extended aeration (EA), sequencing batch reactors (SBR) and oxidation ditch. Anaerobic Reactor Industrial wastewater treatment. Settlement Tanks and Packaged Pumping Stations Primary or final settlement tanks. Dispersed Air Flotation Systems (DAF) KEE Microfloat® Fine Bubble Aeration Systems KEE Aspirator Aerators. KEE Triton Aerator/Mixer. The Biological Solution to Fat, Oil and Grease KEE Bio-Guard – The Grease Digester. Parts and Service Service, Maintenance and Operation. Replacement Parts and Associated Products. Plant Hire. Emergency Service KEE Emergency Call Centre for Managed Contracts.

Solids Technology International was established in 1979 in Dublin, Ireland to develop high-performance belt filter dewatering equipment and innovative solutions for the water and wastewater industry. In 2002 the company was taken over by Kent Stainless. The manufacturing facility includes 3D laser cutting, CNC sheet, electro-polishing and bead blasting finishing plants. Employing over 100 people and resources including over 50 people with mechanical or electrical trades and over 20 design engineers working utilising 3D design packages gives Solids Technology the capability to supply turnkey thickening, dewatering and poly preparation solutions. Today there are over 800 Solids Technology belt filter systems worldwide and are one of the leaders within the marketplace for Stainless steel, fully enclosed, automated high-performance dewatering and thickening system. Our product range includes: Filter Belt Presses, Gravity Belt Thickeners, Poly Preparation Systems.

Lynwood Civil Engineering is a leading water utilities & civil engineering company established over 20 years. Our head office is based in Bristol, providing services across the South West, South Wales & the Thames Valley to support our diverse range of clients across water utilities, local authorities, commercial and domestic customers. We take great pride in being highly knowledgeable experts within our field, and continually invest in our people, processes, plant and vehicles so that we can provide the highest possible standard of service. Our focus on water utilities has seen us build a wastewater and potable business which provides a range of services in repair and maintenance, both reactive and planned works as well as delivering water infrastructure schemes with deep dig expertise. Company Ethos As an established family run organisation, we maintain our core family values between our people, clients, suppliers, and the communities around us. Our streamlined organisational structure, combined with the experience of our Company Directors and other long-standing employees, has enabled the company to grow into an agile organisation that manages client relationships across multiple frameworks, contracts & projects. Health & Safety Health and safety has always been at the forefront of how we run our business. Whilst it is an integral part of working in our industry, we take pride in ensuring that health & safety is embedded in our culture. Quality & Assurance We operate as a people first business by investing in our workforce to ensure our teams have the support and qualifications required to exceed our clients’ expectations. We offer extensive development opportunities that enable our employees to grow with our business.

Do you need Thermal Hydrolysis Plant operational support, training and maintenance? Does your critical water process equipment require contract support and safety assurance? Visualise your assets and maintain operational efficiency through our 360 degree image capture. Invest in your operations through our professional training and technical support services. PBJ Engineering delivers a range of services to support your wastewater treatment and process facilities – we specialise in THP systems and Steam Boiler services, including CEA and BOAS accreditation.  Our team is available nationally to support you, on a contract, project or emergency basis. Supporting your facility and team with a programme custom designed to your needs, typically includes elements of: Whole System Contracts Consultation and Best Practice Commissioning and Maintenance Optimisation and Monitoring Refurbishment and Rebuild Component Fabrication and Supply Training for BOAS and CEA accreditation Some of our typical on-site activities include full capabilities in; Thermal Hydrolysis Plants Steam Boilers Sludge Dewatering Processes Water Treatment Coil and Heat Exchangers Pumps Our ancillary support services includes; 360O Image Capture – Virtual Plant Training and Maintenance Boiler Log Books – Custom design & print Boiler House design – Advice and guidance Equipment – Hire services and component spares Our priority is the safety of all personnel and the operational efficiency of your facilities.  We work with you and your team, to maintain and support your infrastructure – protecting your people, investment and optimising your asset performance. Our team is qualified with CITB / SMSTS, Achilles, and CEA / BOAS. Project involvement includes: Thames Water: Basingstoke THP (commissioning, operation, training, optimisation, maintenance) Beckton THP (energy surveys) Chertsey THP (operation, training, optimisation) Crawley THP (commissioning, operation, training, maintenance, part supply) Crossness THP (operation, optimisation, energy reduction, training, energy surveys) Longreach THP (operation, training, optimisation) Oxford THP (operation, optimisation, fault finding) Riverside THP (water treatment installation, design, energy surveys) Severn Trent: Finham THP (operational support) Strongford THP (operation, training) Southern Water: Goddards Green THP (operational support & performance monitoring) Others: Nestles – Trowbridge – steam boiler operational contract (24 hour call out) Heathrow airport – hot water boiler – scale cleaning

Pipelife is an established and well respected supplier of polyethylene pipes and recognised as a global leader in the supply of long length extruded solid wall PE pipes. Our long length extruded pipes are produced by Pipelife Norge in Norway. The large, high-quality pipes are extruded at our Stathelle plant using premium PE100 resins and strict factory quality controls. Each pipe is made to order through a seamless, continuous extrusion process that eliminates welds and extends directly from the factory into the fjord. From there, the pipes are transported by tugboat straight to their destination, removing the need for land storage or extensive working areas. This efficient production and delivery method not only ensures exceptional durability and precision but also reduces handling and lowers the overall carbon footprint, making Pipelife a reliable partner for major infrastructure projects worldwide. Located on the shore of a sheltered fjord, Pipelife’s Stathelle plant offers the ideal setting for producing long-length pipes. Its coastal position allows continuous production in a clean, controlled environment with direct access to the sea, meaning pipe lengths are limited only by the fjord’s size and the pipe’s diameter. The facility is equipped with extensive storage areas on both land and water, along with a dedicated wharf for easy loading by ocean-going tugs. Supported by Norway’s reliable infrastructure, the plant benefits from a stable energy supply and consistent access to essential raw materials. Inside, a state-of-the-art production line, enhanced with specialized modifications, ensures the highest manufacturing standards and delivers unique advantages in product quality and performance. Pipelife’s long-length, large-diameter pipes are designed for a wide range of demanding applications, including: Wastewater sea outfalls and diffusers Desalination and power plant intakes and outfalls Cable landfalls Cable protection systems Horizontal directional drilling (HDD) liner ducts Fish return lines

At R2M, we are driven by a passion for creating innovative solutions that help build a smarter, more resilient water industry. Our mission is to deliver effective, high-quality products and services to UK water utilities and contractors, continually striving to enhance the nation's water supply for future generations. Founded in 2003 as a supplier of pipes and fittings, R2M quickly earned a reputation for reliability through our extensive product range and robust stock levels—ensuring our customers always had what they needed, when they needed it. Over the years, we have evolved from a trusted supplier into a comprehensive manufacturer and installer too. Today, we offer end-to-end solutions—all under one roof—streamlining the process for our customers and providing exceptional value at every stage. We are proud to be used trusted by all water utilities and contractors across the UK. Since 2019, R2M has proudly been a member of the Hawle Austria Group—a global network of like-minded, quality-focused companies including the likes of Hawle Austria, Erhard, Nova Siria, and Özkan. This partnership gives us exclusive access to a wide portfolio of innovative and proven products from across the group, allowing us to offer tailored solutions that meet the evolving needs of our customers. Being a part of this established and experienced group strengthens our capabilities, expands our product range, and ensures we stay at the forefront of the industry—so our customers always benefit from world-class technologies backed by local expertise. Are you ready to discover how our solutions can support your next project? Get in touch with us today on 01282 778 030.

Sewaco Ltd specializes in design, manufacture, supply and construction of purpose built plant and equipment for use in water supply systems and treatment of municipal sewage and industrial waste water. Our range of products includes: HYCOVER Static & Rotary distributor systems (from 5 l/s up to 980 l/s flow range) with optional auto cleanse and electro pneumatic belt drive mechanism, respectively. HYRATE Polytower biofilter systems using modular plastic media for: High Rate (BOD/COD reduction), upstream of existing treatment plant. Secondary ( BOD removal only or combined BOD removal/Nitrification). Tertiary Nitrification applications, downstream of existing secondary treatment processes. HYRATE Polytowers can easily incorporate natural ventilation or air extraction systems for odour control purposes, as required. Factory built timber support matrix for secondary modular plastic media support. Modular media installation and re-packing undertaken by our experienced site team.

Established for over 20 years, the Siltbuster Limited provides rapidly deployable, “modular off the shelf” water treatment solutions to the construction, industrial and municipal markets, with a client base ranging from the world’s most recognisable multi-national corporations to small enterprises. Siltbuster provides a wide range of water and wastewater treatment equipment for the industrial and municipal markets, including: Packaged lamella dissolved air flotation (DAF) units. Lamella clarifiers. Packaged biological treatment systems. Oil/water separators. Pipe flocculators. Reaction tanks. Containerised dosing systems. In the UK, Siltbuster has pioneered the concept of offering this plant through our extensive hire fleet. Approximately 20 major contracts and circa 50 smaller projects are undertaken each year for a diverse range of clients, many of which are some of the UK’s best-known companies. In addition to the industrial/municipal sector, Siltbuster has undertaken a number of mine water treatment projects in many countries, for example, the UK, Ireland, Greece, France, USA, Canada, Australia and Slovakia. The Siltbuster team pride themselves in their ability to react rapidly and in compliance with the project constraints, delivering mobile or permanent solutions tailored to meet your individual needs.