Treatment Technologies
Activated Carbon Filtration Companies
GAC and PAC providers for taste & odor, organics, chlorine, and micro-pollutant removal in drinking water and industrial streams.
This page is a good fit if you need:
- Activated Carbon or Ion Exchange capabilities
- Suppliers with utilities sector experience
- Providers operating in China or Italy
- Providers
- 203
- Verified
- 5
- Countries
- 29
Can't find the right fit? Post a brief and let qualified suppliers come to you.
Post a projectHow to choose a activated carbon filtration provider
Start with providers that clearly operate in your target geography and project footprint.
Look for industry exposure that matches your water challenge, compliance constraints, and deployment context.
Use technologies, service scope, and proof signals to narrow the list before reaching out to suppliers.
Not sure where to start? Our experts can help.
Filter results
Verified providers
5 claimed companies in this category
Country
Industry
Technology
Find a Activated Carbon Filtration Provider
Showing 21-40 of 203
203 results from 203 matched providers
Sizing and Operating Activated Carbon Filtration for Trace Organic Removal
Activated carbon filtration removes chlorine, taste-and-odor compounds (geosmin, 2-methylisoborneol), trihalomethanes, pesticides, and low-molecular-weight organics through physical adsorption on high-surface-area media at 800–1,200 m²/g iodine number. Granular activated carbon (GAC) beds are sized by empty bed contact time (EBCT) — 7.5–15 minutes for taste-and-odor, 10–20 minutes for THM precursor removal under USEPA Stage 2 D/DBP Rule, 15–30 minutes for atrazine, 1,4-dioxane, and longer-chain PFAS. Powdered activated carbon (PAC) at 5–25 mg/L provides operational flexibility for seasonal upsets.
Bed life depends on competitive adsorption from natural organic matter, biological growth on the carbon surface, and target contaminant concentration. Municipal THM precursor removal typically yields 12–36 months between thermal reactivations at 800–900 °C; industrial dechlorination ahead of RO runs 24–60 months. Specify virgin coconut-shell GAC (high hardness, low ash, NSF/ANSI 61 for potable use) or bituminous-coal GAC (lower cost, higher capacity for larger organics). Demand AWWA B604 certification for potable applications and validated breakthrough curves on your actual feedwater.
Operational pitfalls include bed channeling (mitigated by backwash at 15–20 m/h with 30–50% bed expansion), microbial colonization (managed by periodic chlorination then dechlorination upstream of RO), and pressure-drop creep signaling exhaustion. Spent carbon is reactivated thermally in rotary or multiple-hearth furnaces under EU BAT-AEL waste-gas limits. Aguato lists providers with proven GAC media supply, vessel fabrication, and on-site reactivation services for municipal drinking water, industrial dechlorination, and PFAS-removal duty.
Frequently Asked Questions
What EBCT do I need for GAC to remove THMs and taste-and-odor compounds?
Taste-and-odor compounds (geosmin, MIB) require 7.5–15 minutes EBCT. THM precursor removal under USEPA Stage 2 D/DBP Rule needs 10–20 minutes EBCT. Atrazine, perchlorate precursors, and 1,4-dioxane need 15–30 minutes. EBCT equals bed volume divided by flow rate. Higher EBCT means longer bed life and better breakthrough margin, but also more capital cost and footprint — always pilot on actual source water before locking design.
How long does a GAC bed last before reactivation?
Bed life depends on influent TOC, target contaminants, and EBCT. Municipal THM precursor removal at 2–5 mg/L TOC typically runs 12–36 months between reactivations. Industrial dechlorination ahead of RO at 1–3 mg/L free chlorine runs 24–60 months. PFAS removal is much shorter — 6–18 months — because PFAS competes poorly with natural organic matter for adsorption sites. Track effluent target contaminant and replace at breakthrough.
What is the difference between GAC and PAC?
GAC is a fixed-bed contactor running continuously and replaced or reactivated when exhausted. PAC is dosed at 5–25 mg/L upstream of a clarifier or filter and removed with sludge. PAC suits seasonal taste-and-odor events or emergency spill response where a permanent GAC contactor is not justified. GAC offers lower cost per kg of contaminant removed for continuous loads; PAC offers operational flexibility but higher per-event cost.
Is GAC effective for removing PFAS from drinking water?
GAC removes longer-chain PFAS (PFOS, PFOA) effectively but has limited capacity for shorter-chain compounds (PFBS, PFBA). GAC systems targeting PFAS require EBCT of 10 to 20 minutes and typically achieve 6 to 18 month bed life depending on competing TOC. For shorter-chain PFAS or very low target concentrations, single-use anion exchange resins or reverse osmosis are usually paired with or substituted for GAC. The DWI's current indicative value for PFAS in UK drinking water is guiding water companies to evaluate treatment options now ahead of future regulatory MCL setting.
A treatment works serving 80,000 properties was failing to consistently achieve the WS(WQ)R 2016 taste and odour standards during summer cyanobacterial bloom events, with geosmin and 2-methylisoborneol (MIB) detectable at the consumer tap above the 10 ng/L guide value. The existing sand filters had no adsorption capability.
Granular activated carbon contactors were installed in series with the existing rapid gravity sand filters, providing an EBCT of 12 minutes using coconut-shell GAC certified to AWWA B604. Powdered activated carbon emergency dosing capability was retained as a contingency for extreme bloom events exceeding GAC bed capacity.
Geosmin and MIB removal through the GAC contactors exceeded 90% in all monitored bloom events over the first 3 seasons of operation. Consumer taste and odour complaints related to earthy/musty flavour fell by 94% compared to the pre-GAC baseline. GAC bed life (measured by breakthrough of test compounds) exceeded 24 months before the first planned reactivation.
Questions to Ask Shortlisted Providers
- 1
What EBCT are you designing to for removal of our target compounds, and have you based this on pilot column testing with our actual feedwater rather than generic design curves?
EBCT requirements are feedwater-specific because NOM competes for adsorption sites; generic design curves can underestimate required EBCT by 30 to 50% on high-NOM source waters.
- 2
What GAC media specification are you proposing (coconut shell vs. coal-based, iodine number, effective size), and is it certified to AWWA B604 and NSF/ANSI 61?
Media specification determines adsorption capacity and durability; NSF/ANSI 61 certification is mandatory for potable applications and must cover the specific product proposed.
- 3
How do you monitor GAC bed life and breakthrough, and at what point do you recommend reactivation or replacement?
GAC beds exhaust gradually; continuous monitoring of target compound breakthrough is the only reliable way to prevent non-compliant water reaching distribution.
- 4
What is the reactivation or carbon replacement logistics arrangement, and who bears the cost and liability if reactivation quality is insufficient to restore bed performance?
Thermal reactivation must achieve sufficient surface area restoration to meet original performance; reactivated carbon that underperforms compared to virgin carbon creates unquantified performance risk.
- 5
Does your carbon system require downstream chlorination adjustment, and have you assessed the risk of biological growth within the GAC bed producing unwanted byproducts?
GAC contactors can support biological activity that modifies water chemistry before chlorination; the interaction between the biologically active carbon and downstream disinfection must be assessed in the design.
What Drives Cost in This Category
Higher EBCT requires larger contactor vessels and more media, directly increasing capital cost; EBCT is the primary design variable linking performance targets to system size.
High-quality coconut-shell GAC costs 2 to 3 times more per tonne than coal-based media but has higher hardness, lower fines generation, and longer service life between reactivations.
GAC reactivation at 800 to 900 degrees C costs GBP 400 to GBP 800 per tonne; reactivation frequency depends on EBCT, contaminant loading, and competing NOM, and is the dominant long-term operating cost variable.
Retaining PAC dosing capability alongside GAC contactors adds capital cost for storage, dosing equipment, and upstream contact time, but provides essential operational flexibility during extreme taste-and-odour events.
Key Regulations & Standards
Sets the parametric framework within which taste and odour compounds, THMs, and emerging contaminants (including indicative PFAS values) must be controlled in drinking water supplies in England.
GAC systems installed on public water supplies as a new treatment process require DWI prior approval, including demonstration of media safety and process performance.
American Water Works Association standard for granular activated carbon specifying minimum iodine number, apparent density, moisture, and hardness for water treatment applications.
Certification standard for all materials in contact with drinking water, including GAC media, vessel linings, and associated pipework, ensuring materials do not leach contaminants above health-based thresholds.